Taurus Alpatec BOREAL 16C Owner's manual

Page is loading ...

English

Fans Boreal series

Boreal 16

Boreal 16C

Dear customer,

Many thanks for choosing to

purchase a TAURUS brand product.

Thanks to its technology, design and

operation and the fact that it exceeds

the strictest quality standards,

a fully satisfactory use and long

product life can be assured.

Description

A Front grill

B Nut for attaching fan blades

C Fan Propeller

D Grill fastening nut

E Rear grill

F Motor shaft

G Front of motor

H Oscillation button

I Motor/cover

J Timer switch

K On/Off switches

L Screw for attaching to fan stand

M Adjustable height knob

N Retractable fan stand

O Small cover for stand base

P Stand base

Q Grill safety screw

R Base

S Table-top base

Safety advice and warnings

- Read these instructions carefully

before switching on the appliance

and keep them for future reference.

Failure to follow and observe

these instructions may result in

an accident. Failure to follow and

observe these instructions may result

in an accident.

- Place the appliance on a

horizontal, flat, stable surface away

from heat sources and contact with

water (splashes etc.).

Electric safety:

- Do not use the appliance if the

cable or plug is damaged.

- Ensure that the voltage indicated

on the nameplate matches the

mains voltage before plugging in the

appliance.

- The appliance’s plug must fit

into the mains socket properly. Do

not alter the plug. Do not use plug

adaptors.

- Do not leave the appliance out in

the rain or exposed to moisture. If

water gets into the appliance, this

will increase the risk of electric

shock.

- If any of the appliance casings

breaks, immediately disconnect the

appliance from the mains to prevent

the possibility of an electric shock.

- Do not use the appliance if it has

fallen on the floor, if there are visible

signs of damage or if it has a leak.

- Do not use the appliance with

damp hands or feet, or when

barefooted.

- Do not force the electrical wire.

Never use the electric wire to lift up,

carry or unplug the appliance.

- Do not wrap the cable around the

appliance.

- Do not touch the plug with wet

hands.

Personal safety:

- Do not touch any of the appliance’s

moving parts while it is operating.

Use and care:

- Fully unroll the appliance’s power

cable before each use.

- Do not use the appliance if the on/

off switch does not work.

- Do not move the appliance while

in use.

- After its use, disconnect the

appliance; do not trust the

container’s detector.

- Disconnect the appliance from the

mains when not in use and before

undertaking any cleaning task.

- This appliance is for household use

only, not professional or industrial

use.

- This appliance is not a toy.

Children should be supervised to

ensure that they do not play with the

appliance.

- This appliance is intended for adult

use. Ensure that this product is not

used by the disabled, children or

people unused to its handling.

- This appliance should be stored

out of reach of children and/or the

disabled.

- Do not expose to extreme

temperatures or strong magnetism.

- Any misuse or failure to follow

the instructions for use renders the

guarantee and the manufacturer’s

liability null and void.

Installation

Assembling the base:

- Fit the base with the column, and

secure it with the screws provided.

(Only models with column)

- To fix the base into the appliance,

place the appliance face down.

- Fit the base on the main body of

the appliance.

- Fix the base using the screws

provided.

- Stand the appliance up again so

as to check that the base works

properly.

Assembling the grill and the

propeller:

- Fit the rear grill (E) on the motor

housing (G), Matching their fitting

points.

- Tight the grill nut (D) that attaches

the grill, make sure of a correct

setting.

- Fit the propeller (C) On the motor

shaft (F).

- Tight the nut (B) that attaches the

propeller, Make sure of a correct

setting.

- Fit the front grill (A) front the rear

grill (E), matching the security screw

position. Fix the front grill by using

the hooks and tight the security

screw (Q) by using a screwdriver.

- Check the correct rotation of the

propeller.

Instructions for use

Use:

- Unroll the cable completely before

plugging it in.

- Connect the appliance to the

mains.

- Guide the diffuser of the appliance

to direct the flow of air in the

desired direction.

- Turn the timer switch to the “on”

position and then select the desired

fan power level.

0.- Fan off

1.- Minimal air flow

2.- Medium air flow

3.- Maximum air flow

- Use the timer switch, select the

functioning period, from 0 to 60

minutes. Once the time period

has elapsed the fan will turn off

automatically.

Oscillation function:

- The oscillation function makes it

possible to direct the flow from the

apparatus so that it automatically

alternates over a range of 75º.

- To activate this function turn the

knob H.

- To deactivate this function, follow

the procedure for switching it on in

reverse.

Once you have finished using the

appliance:

- Stop the appliance by turning the

timer switch to the “Off” position.

Cleaning

- Disconnect the appliance from

the mains and let it cool before

undertaking any cleaning task.

- Clean the equipment with a damp

cloth with a few drops of washing-up

liquid and then dry.

- Do not use solvents, or products

with an acid or base pH such as

bleach, or abrasive products, for

cleaning the appliance.

- Do not submerge the appliance in

water or any other liquid, or place it

under a running tap.

Anomalies and repair

- Take the appliance to an authorised

technical support service if problems

arise. Do not try to dismantle or

repair without assistance, as this

may be dangerous.

- If the connection to the mains has

been damaged, it must be replaced

and you should proceed as you would

in the case of damage.

For EU product versions and/or in

case that it is requested in your

country:

Ecology and recyclability of the

product

- The materials of which the

packaging of this appliance consists

are included in a collection,

classification and recycling system.

Should you wish to dispose of them,

use the appropriate public containers

for each type of material.

- The product does not contain

concentrations of substances that

could be considered harmful to the

environment

This appliance complies with

Directive 2006/95/EC on Low

Voltage and Directive 2004/108/EC

on Electromagnetic Compatibility.

- This symbol means that in

case you wish to dispose of

the product once its working

life has ended, take it to

an authorised waste agent

for the selective collection

of waste electrical and

electronic equipment

(WEEE)

Page is loading ...

Boreal 16

Boreal 16C

,

.

:

A

B

C

D

E

F

G

H

I /

J

K /

L

M

N

O

P

Q

R

S

-

.

-

.

:

-

Page is loading ...

Product weight (aproximate)

Boreal 16 (VerIII) G.W. 3,95 Kg

N.W. 3,30 Kg

Boreal 16C (VerIII) G.W. 7,00 Kg

N.W. 5,80 Kg

Avda. Barcelona, s/n

E 25790 Oliana

Spain

www.taurus.es

Taurus Alpatec BOREAL 16C Owner's manual

This manual is also suitable for

Taurus Alpatec BOREAL 16C Owner's manual

in other languages

Related papers

Other documents