Mettler Toledo ShortPS7, PS7-X Paint Scale Operating instructions

Mettler Toledo
Brand
Mettler Toledo
Model
ShortPS7, PS7-X Paint Scale
Category
Kitchen scales
Type
Operating instructions
Short Operating Instructions
Paint Scale PS7, PS7-X
Change weighing unit
(g, oz, parts)
Switch scale
on/off
Tare
scale
Activate factor weighing/
select weighing factor
O/T
On/Off
O/T
On/Off
Unit
Menu
Deactivate factor weighing
(weigh without factor)
Factor
Call up Master Mode (menu) Navigating in Master Mode
Confirm option Cancel option
–
No
+
Yes
Unit
Menu
Select formula weighing method and confirm
Mode
Enter
Mode
Enter
Basic Functions
Factor
fctr
*
5. 00
0. 0
+
Yes
M.A.S.t.E.r
STD ABS END
0. 0
g
0. 0
g
Place container on
scale and tare
O/T
On/Off
0. 0
g
Place container on
scale and tare
O/T
On/Off
Depending on the correction mode (“END”: at end, “IMM”: after each component)
the scale checks automatically whether extra quantities of components weighed
so far must be added.
If so, add extra quantity of component shown and confirm:
6 Automatic correction
-10.0
g
co01
*
Next
Comp
Repeat this step until all extra quantities have been added.
When the formula is complete, the scale shows “done”, and then the
final weight of the mixture.
Press briefly
several times
Press and
hold down
Press briefly
STD ABS END
STD CUM END
STD ABS IMM
STD CUM IMM
ADV ABS END
ADV CUM END
ADV ABS IMM
ADV CUM IMM
Formula weigh. mode Display type Correction mode
Standard Advanced Absolute Cumulative Immediate At end
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
Formula weighing
method
Subject to technical changes and to the availability
of the accessories supplied with the instruments
© Mettler-Toledo GmbH 2001 21303112 Printed in Switzerland 0107/7.12
Mettler-Toledo GmbH, CH-8606 Greifensee, Switzerland, Tel. (01) 944 22 11, Fax (01) 944 34 50
Formula Weighing
STD ABS END / STD CUM END
STD ABS IMM / STD CUM IMM
ADV ABS END / ADV CUM END
ADV ABS IMM / ADV CUM IMM
1 Tare 1 Tare
Enter target weight of component
digit by digit:
Set digit Confirm digit
+
Yes
–
No
+
Yes
Mode
Enter
If too much component was
weighed, enter target weight with
2 Weigh component
or
2 Start formula weighing
Next
Comp
3 Enter target weight
Confirm selected target weight
Next
Comp
4 Add component
-30.0
g
co01
*
corr adv
g
co01
*
corr adv
0. 0
5 Confirm weighing
Note: even if the quantity weighed
was excessive
Next
Comp
3 Confirm weighing
Last
Comp
To weigh another
component (return to 2)
After last component
(go to 6)
Note: With correction mode
“IMM”, automatic correction
is done first (see 6).
Next
Comp
To weigh another com-
ponent (return to 3)
Note: You can terminate formula weighing at any time with:
Last
Comp
g
30.0
Last
Comp
After last component
(go to 6)
Note: With correction mode
“IMM”, automatic correction
is done first (see 6).
g
co01
*
0. 0
g
done
*
0. 0
gg
137.5
corrcorr
corr
For more information ---> http://www.e-refinish.com
METTLER TOLEDO
+
Y
e
s
U
n
it
M
e
n
u
F
a
c
t
o
r
M
o
d
e
E
n
ter
O
/T
On/Off
–
N
o
Last
Comp
N
ex
t
C
om
p
PS7
m
a
x
.
7
1
0
0
g
d
=
0
.
1
g
  • Page 1 1

Mettler Toledo ShortPS7, PS7-X Paint Scale Operating instructions

Mettler Toledo
Brand
Mettler Toledo
Model
ShortPS7, PS7-X Paint Scale
Category
Kitchen scales
Type
Operating instructions
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers