AKM 200 PRODUCT DESCRIPTION SHEET
IL
Operation of burners with electric
ignition
To light one of the burners
• Press the relative knob and turn it anti-
clockwise to the large flame setting .
• At the same time, press the push-button with
a star .
The spark plug gives out a spark that causes
the burner to ignite.
If the burner does not ignite, press the push-
button again.
Note
— Should particular local conditions of the
delivered gas make the ignition of the burner
difficult, it is advisable to repeat the
operation with the knob turned to the small
flame setting .
1. Removable panstand grids
2-3. Medium burners
4. Large burner
5. Small burner
6. Medium burner control knob
7. Medium burner control knob
8. Large burner control knob
9. Small burner control knob
10. Electronic ignition button
Symbols
Shaded circle Tap closed
Large Maximum opening/
flame delivery
Small Minimum opening or
flame reduced delivery