INSTRUCTION MANUAL
Product Diagram
What’s in the box?
Thank you for purchasing the Accessory Power Refresh Bat-
tery Charger. This light-weight and compact device allows you
to charge up to 4 AA or AAA rechargeable batteries at a time
and comes with power adapters for your home and car. A con-
venient charging status LCD display shows a meter to indicate
charging progress. The Accessory Power Refresh Battery Char-
ger is the perfect charging solution at home or on-the-go!
- ReVIVE Refresh Battery Charger
- AC Power Adapter
- DC Power Adapter
- Instruction Manual
r
am
y
Charger
(1)
(5)
(4)
AC Power
Adapter
DC Power
Adapter
(3)
(2)
fig. 1
(1) Battery Status LCD
(2) Battery Compartment
(3) Charging Contacts
(4) Adapters
(5) Barrel Power Port
Innovative Features
Operating Instructions
- The Refresh Battery Charger can charge 1, 2, 3 or 4 AA or AAA Ni-MH or
Ni-CD batteries at a time.
- A Microcomputer IC Chip controls charging processes. The intelligent chip
will cut o charging when the batteries are full and automatically convert
to trickle charging mode. This ensures your batteries reach full capacity and
protects against overcharging.
- The IC Chip automatically identi es non-rechargeable batteries, short-
circuited batteries and defective rechargeable batteries. Charging will only
be initiated if properly functioning batteries are inserted, protecting against
device malfunctioning.
- Overheat Protection: The Refresh Battery Charger will stop charging
automatically if the temperature of the charger or battery gets too high
during charging.
Connecting the Refresh Battery Charger to Power:
Choose the appropriate power adapter (AC or DC) for your charging needs.
The AC power adapter is for use in a wall outlet. The DC power adapter
should be used in your car’s DC power outlet. Connect the appropriate
power adapter to a power source. Next, connect the barrel tip of the power
adapter to the (5) barrel power port on the Refresh Battery Charger ( g.
2-1 on the next page). You will then see the (1) battery status LCD illumi-
nate green for 1 second. The Refresh Battery Charger is now connected to
power (The LCD will only illuminate for 1 second then turn o if there are no
batteries loaded in).
Battery Charging
When charging, (the (1) Battery Status LCD lights up green and shows the
letters “CHG”) the corresponding battery icon shows which station is actively
charging. The ashing battery icon will show you the level of the current
charge of the battery in that particular station. If the (1) Battery Status LCD
shows “ERROR”, re-insert the batteries. If “ERROR” continues, that means the
battery is defective, short-circuited or a non-rechargeable ( g. 3 on next
page).
Inserting your batteries into the Refresh Charger:
Open the (2) battery compartment lid and insert your batteries while align-
ing them to match the + and – diagrams in the charging slots ( g. 2-2). You
can charge 1- 4 AA/AAA batteries in the Refresh Charger at a time. If you are
charging AAA batteries, please use the smaller of the two charging slots. You
can close the (2) battery compartment lid while charging.
fig. 2-1 fig. 2-2
Troubleshooting
Battery Charging (cont’d)
Battery Status LCD
fig. 3
Is the green light on? Do you see a battery?
Symbol? ERROR or CHG?
What does this mean?
No No ReVIVE Refesh Charger is
not connected to power,
or you have not inserted
a battery.
Yes The battery is charging.
Yes The battery is almost fully
charged.
No The battery is full and
done charging. The power
to the battery has been
shut-o .
CHG
CHG
CHG
ERROR
ERROR
This symbol indicates that the batteries are properly receiving power from the Refresh Charger
This symbol indicates that there is an issue with one or more of the inserted batteries. Please
re-insert batteries one by one to ensure there is no problem. If ERROR continues to appear then
your battery is either short-circuited, non-rechargeable or defective.
Cautions
- Keep in a safe place free from dust, liquid and extreme temperatures.
- Only use this device with the recommended power sources.
- Only insert AA/AAA Ni-MH or Ni-CD Rechargeable batteries.
- If you do not follow the operating instructions correctly, an electric shock
may occur.
- Keep out of reach of small children.
- When not in use, please disconnect batteries or power sources.
- Short circuit protection prevents the batteries from short-circuiting the
charger when incorrect polarity makes contact.
- A new battery can reach maximum charging potential after 2 to 3 cycles.
- If a battery is stored for over one week, the battery may lose some power.
Recharge the battery before use.
- It is normal for the battery to get warm when charging, it will slowly return
to room temperature once charging is complete.
- Ideal temperature for operation of this device is between 32 degrees F and
95 degrees F.
Troubleshooting (cont’d)
Optimum Operating and Storage Conditions
Product Speci cations
Size: 4.52”x2.59”x1.22” (LxWxH)
Weight: 80g (without battery)
1. Input: 12V DC 500mA
2. Output: AA 1.2VDC 1600mA, AAA 1.2V DC 800mA
3. When unloading battery: 50mA MAX
4. When all channels are charging batteries: 500mA MAX
5. Charging su ciency of battery: ≥80%
6. AA 1200mAX1, AA 600mAX2, AA 300mAX3, AA 300mAX4, AAA 600mAX1,
AAA 300mAX2, AAA 150mAX3, AAA 150mAX4
1. Operating Condition: temperature: 0-35° humidity: ≤95%
2. Storage Condition: temperature: -25°+60° humidity: ≤85%
3. Normal Product Conditions When In Use: Surface temperature of charger
when charging: ≤60°. Surface temperature of battery when charging:≤60.
(C) 2010 ACCESSORY POWER
All trademarks and brand names are the property of their owners.
/
