Titan Fitness NEMESIS™ Functional Trainer User manual

Brand: Titan Fitness

Model: NEMESIS™ Functional Trainer

Type: User manual

MPN(s): CFNTLTNR

SKU(s): 401219

UPC(s): 840009214653

KEY BOX DESCRIPTION QTY

1 1 BASE FRAME 1

2 1 MAIN FRAME 1

3 1 UPRIGHT FRAME 1

4 1 SLIDING FRAME 1

10 1 TOP PULLEY FRAME 1

11 1 LOWER LIMITED FRAME 1

12 1 COUNTER WEIGHT

13 1 ADJUSTABLE TUBE 1

14 1 RIGHT COVER 1

15 1 LEFT COVER 1

16 1 FIXING PLATE 2

17 1 FRONT FIXING PLATE 1

18 1 LEFT LOGO PLATE 1 1

19 1 LOGO PLATE 2 1

21 1 TOP PERMANENT SEAT 1

22 1 BASE PERMANENT SEAT 1

24 1 GUIDE ROD 2

25 1 SPACER BUSHФ18*Ф10.2*44 4

30 1 CABLE Ф5*10690 1

31 1 CABLE Ф5*1630 1

37 1 GUIDE ROD BUSHING 2

39 1 WEIGHT PLATE 20

40 1 TOP WEIGHT STACK 1

48 1 STOPPER 80*45*50 2

55 1 HANDLE 2

STEP 1

Assemble the Lower Limited Frame (11) on Base Frame (1), using Fixing Plate (16), Flat Washer Φ11*Φ20*2

(79), Nut M10(86), and Hex Bolt M10*30(70).

TIGHTEN ALL THE BOLTS.

STEP 2

1. Connect Main Frame (2) and Base Frame (11), using Flat Washer Φ11*Φ20*2 (79), Spring Washer Φ10

(83), and Hex Bolt M10*25 (71).

2. Connect Upright Frame (3), Main Frame (2) and Base Frame (11), using Flat Washer Φ11*Φ20*2 (79),

Spring Washer Φ10 (83), Nut M10 (86), Hex Bolt M10*115 (62) and Hex Bolt M10*25 (71).

TIGHTEN ALL THE BOLTS.

STEP 3

1. Install the Left Logo Plate (18) on Main Frame (2), using Flat Washer Φ11*Φ20*2 (79), Nut M10 (86), and

Hex Bolt M10*110 (63).

2. Connect Top Permanent Seat (21) and Main Frame (2), using Flat Washer Φ6.6*Φ12*1.6 (81), Spring

Washer Φ6 (85) and Hex Bolt M6*15 (74).

3. Connect Base Permanent Seat (22) and Base Frame (1), using Flat Washer Φ6.6*Φ12*1.6 (81), Spring

Washer Φ6 (85) and Hex Bolt M6*15 (74).

TIGHTEN ALL THE BOLTS.

STEP 4

Install the Rubber Bumper (48), Guide Rod (24), Weight Plate (39), Top Weight Stack (40) on Base Frame (1) in

turns, remove the bolts on Guide Rod Bushing, then fixing the Guide Rod on Rear Support (2).

STEP 5

1. Connect Right Cover (14) with logo at top to Main Frame (2), using Flat Washer Φ8.4*Φ24*2 (80), Spring

Washer Φ8 (84), Rubber Bumper (54) and Hex Bolt M8*65(76).

2. Connect Left Cover (14), Top Permanent Seat (21) and Base Permanent Seat (22), using Flat Washer

Φ6.6*Φ12*1.6 (81), Spring Washer Φ6 (85), and Hex Bolt M6*15 (74).

PLEASE ENSURE TOP AND BOTTOM ORIENTED CORRECTLY BEFORE INSTALLING.

STEP 6

Insert the Sliding Frame (4) into the Adjustable Tube (8), fixing by Pin.

STEP 7

Remove the Pulley on Main Frame (2), through the Cable to the pulley, then reinstall the pulley.

2. Fix the Adjustable Tube (13) on Base frame (1), using Flat Washer Φ11*Φ20*2 (79), Nut M10 (86), and Hex

Bolt M10*105(64). Install the Fixing Plate (17) on Adjustable Tube (13), using Flat Washer Φ11*Φ20*2

(79), Spring Washer Φ10 (83), and Hex Bolt M10*105 (64).

3. Fix the Adjustable Tube (13) on Main frame (2), using Flat Washer Φ11*Φ20*2 (79), Nut M10(86), Spacer

Bush (25) and Hex Bolt M10*110 (63).

4. Screw the Cable (31) on the Sliding Frame, using the Flat Washer Φ13.5*Φ20*2 (78) and Spring Washer

Φ12(82).

TIGHTEN THE BOLT.

STEP 8

Install the cables from ① to ⑬ in the sequence as shown.

STEP 9

Loosen the Nut M10(86) and Flat Washer Φ11*Φ20*2 (79), install the Left Logo Plate (19) on Main Frame (2),

then reinstall the Flat Washer Φ11*Φ20*2 (79) and Nut M10(86), tighten the Nuts.

STEP 10

Loosen the Nut M10(86) and Flat Washer Φ11*Φ20*2 (79), connect the Upright Frame (3), Main Frame (2)

and Top Pulley Frame (10), using Flat Washer Φ11*Φ20*2 (79) and Nut M10(86), tighten the Nuts.

STEP 11

Fix the Handle (55) on Pulley frame (7).

KEY BOX DESCRIPTION QTY KEY BOX DESCRIPTION QTY

(1) 1

Base Frame 1

(48) 1

Stopper 80*45*50 2

(2) 1

Main Frame 1

(49) 1

Rubber Baffle 1

(3) 1

Upright Frame 1

(50) 1

End Cap 40*80*2.5 1

(4) 1

Sliding Frame 1

(51) 2

Floor Mat 4

(5) 1

Adjustable Frame 2

(52) 2

Tapered Rubber Bumper 4

(6) 1

Swing Arm Frame 2

(53) 2

Plastic Sleeve 8

(7) 1

Pulley Frame 2

(54) 1

Rubber Bumper 3

(8) 1

Swing Arm Front Connecting Frame 1

(55) 1

Handle 2

(9) 1

Double Pulley Bracket 1

(56) 1

Magnetic Pin 1

(10) 1

Top Pulley Frame 1

(57) 1

Safety Hook 2

(11) 1

Lower limited Frame 1

(58) 1

O-Ring 2

(12) 1

Counter Weight 1

(59) 1

Bearing 61901ZZ 8

(13) 1

Adjustable Tube 1

(60) 1

Bearing 6007ZZ 4

(14) 1

Right Cover 1

(61) 1

Bearing 6005ZZ 4

(15) 1

Left Cover 1

(62) 1

Hex Bolt M10-115 2

(16) 1

Fixing Plate 2

(63) 1

Hex Bolt M10*110 5

(17) 1

Front Fixing Plate 1

(64) 1

Hex Bolt M10*105 4

(18) 1

Left Logo Plate 1 1

(65) 1

Hex Bolt M10*90 1

(19) 1

Logo Plate 2 1

(66) 1

Hex Bolt M10*75 1

(20) 1

Side Cover Plate 2

(67) 1

Hex Bolt M10*70 2

(21) 1

Top Permanent Seat 1

(68) 1

Hex Bolt M10*50 2

(22) 1

Base Permanent Seat 1

(69) 1

Hex Bolt M10*45 10

(23) 1

Bearing Washer 2

(70) 1

Hex Bolt M10*30 4

(24) 1

Guide Rod 2

(71) 1

Hex Bolt M10*25 6

(25) 1

Spacer BushФ18*Ф10.2*44 4

(72) 1

Hex Bolt M10*25 6

(26) 1

Φ50 Pulley 2

(73) 1

Hex Bolt M6*20 8

(27) 1

Roller 4

(74) 1

Hex Bolt M6*15 14

(28) 1

Spacer Bush Ф12*Ф6*16 8

(75) 1

Hex Bolt M5*10 1

(29) 1

Bearing Pulley 6

(76) 1

Hex Bolt M8*65 3

(30) 1

Cable Ф5*10690 1

(77) 1

Hex Bolt M6*30 8

(31) 1

Cable Ф5*1630 1

(78) 1

Flat Washer Φ13.5*Φ24*2.5 2

(32) 1

Double threaded shaft

(79) 1

Flat Washer Φ11*Φ20*2 78

(33) 1

Pin 2

(80) 1

Flat Washer Φ8.4*Φ24*2 3

(34) 1

Bearing Washer 2

(81) 1

Flat Washer Φ6.6*Φ12*1.6 34

(35) 1

Φ115 Pulley 1

(82) 1

Spring Washer Φ12 2

(36) 1

Φ95 Pulley 12

(83) 1

Spring Washer Φ10 8

(37) 1

Guide Rod Bushing 2

(84) 1

Spring Washer Φ8 3

(38) 1

Pulley Casing 12

(85) 1

Spring Washer Φ6 20

(39) 1

Weight Plate 20

(86) 1

Nut M10 42

(40) 1

Top Weight Stack 1

(87) 1

Nut M6 14

(41) 1

Selected Shaft 1

(88) 1

Nut M8 3

(42) 1

Pin Shaft 1

(89) 1

Hexagon Flange Nut M12 1

(43) 1

Spring Φ14*Φ1.5*55 1

(90) 1

Screw M6*4 2

(44) 1

Handle Bar 1

(91) 1

Countersunk Head Screw M5*10 8

(45) 1

Φ19 Metal Bushing 2

(92) 1

Φ25 circlip for shaft 2

(46) 1

Rubber Pad 2

(93) 1

Φ35 circlip for shaft 2

(47) 1

Buffered Washer 1

This concludes the CFNTLTNR Owner’s Manual.

If applicable to your product, make sure to tighten all

nut-and-bolt combinations before use.

Enjoy!

DISCLAIMER

This equipment must be used with care by capable and competent individuals under supervision, if necessary.

The use of any fitness equipment, including this one, involves the potential risk of injury. You accept and assume full

responsibility for any and all injuries, damages (both economic and non-economic), and losses of any type, which may

occur, and you fully and forever release and discharge Titan, its insurers, employees, officers, directors, associates, and

agents from any and all claims, demands, damages, rights of action, or causes of action, present or future, whether the

same be known or unknown, anticipated, or unanticipated, resulting from or arising out of the use of said equipment.

TITAN MAKES NO WARRANTY WHATSOEVER WITH RESPECT TO THE EQUIPMENT, INCLUDING ANY WARRANTY OF

MERCHANTABILITY OR WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE, WHETHER EXPRESS OR IMPLIED BY LAW,

COURSE OF DEALING, COURSE OF PERFORMANCE, USAGE OF TRADE OR OTHERWISE. BUYER ASSUMES ALL LIABILITY IN

USE OF THE EQUIPMENT.

NEED HELP?

1 (800) 605-8241

info@titandistributorsinc.com /

Business Hours: Monday–Friday • 8:00 a.m.–5:00 p.m. (CT)

Titan Fitness NEMESIS™ Functional Trainer User manual

Titan Fitness NEMESIS™ Functional Trainer User manual

Titan Fitness NEMESIS™ Functional Trainer User manual

Related papers

Other documents