5019 412 10202
CONSUMPTION DATA
Bauknecht is a registered trademark.
PREPARATION OF THE WASH CYCLE
“Clean+” button
• Choosethisoptionifyouuseanin-washadditivefor
stainremoval(powder,forexample“Vanish”)-itwill
optimizetheadditive’sefficiencytogetbetterwash
performanceandstainremoval.
• Selectableforprogrammes“Cotton”and
“Synthetics”;choosetemperatureof30or40°Cand
usewithmaximumload.
• Addanappropriateamountofin-washadditive
forstainremoval(powder)tothemainwash
chamber,togetherwithyourdetergent(onlyuse
powderdetergentwiththisoption).Respectthe
manufacturer’sdosinginstructions.
• Prolongstheprogrammebyapprox.10to15minutes.
• Appropriateforuseofstainremoversandbleaches
onoxygenbasis.Chlorine or perborate bleaches
must not be used!
“Intensive Rinse” button
• Theamountofwaterisincreasedtoensureamore
intensiverinse.
• Thisoptionisparticularlysuitableforareaswithvery
softwater,washingbabylinenandpeoplewithskin
allergies.
“Rinse Hold” button
• Thelaundryremainsinthelastrinsewaterwithout
progressingtothefinalspincycletoavoidcreasing
andpreventcoloursfromchanging.
• Thisoptionisparticularlyrecommendedforthe
“Synthetics”,“Dailyload”and“Delicates”programmes.
Itisusefulifyouwanttopostponespinningtoalater
time,orifyouwanttodrainoutonly.
• Ifyouselect“RinseHold”,donotleaveitemstosoak
fortoolong.
• Assoonastheappliancestopsintherinsehold,the
“Rinsehold”lampofthesequenceindicatorlightsup
andthelampnexttothe“Start”buttonflashes.
SELECT THE DESIRED OPTION(S)
Selecting or deselecting an option can be done at
any time during the programme. The option will be
applied as long as the corresponding programme
phase has not been executed yet. When the
combination of programme and additional
option(s) is not possible, the indication lights
switch off automatically.
“Prewash” button
• Onlyforheavilysoiledloads(forexamplesand,
granulardirt)sensible.Increasesthecycletimeby
approximately20min.
• Donotuseliquiddetergentsforthemainwashwhen
activatingtheprewashoption.
“Rapid” button
• Enablesquickerwashingbyshorteningthe
programmeduration.
• Recommendableforsmallloadsoronlylightlysoiled
laundry.
Terminate the “Rinse Hold” option:
• Pressthe“Start”button;theprogrammewill
terminateautomaticallywiththefinalspincyclefor
thepresentwashprogramme.
• Ifyoudonotwishtospintheclothes,turnthe
programmeselectorknobtothe“Drain”programme
andpressthe“Start”button.
“Variable spin” button
• Everyprogrammehasapredefinedspinspeed.
• Pressthebuttontosetanotherspinspeed.
• Ifspinspeed“0”isselected,thefinalspinningis
cancelledbutintermediatespinpeaksremainduring
therinse.Thewaterisdrainedoutonly.
ConsumptionvaluesweremeasuredinnormalizedconditionsincompliancewithstandardIEC/EN60456.Consumptiondatainthehomemayvarywith
respecttothevaluesinthetableinrelationtothewatersupplypressureandtemperature,theloadandthetypeofwash.Waterandenergyconsumptionrefer
tothedefaultsettingoftheprogrammes;selectingspecialoptionsormodifyingspinspeedortemperaturewillchangetheconsumptiondata.
Theprogrammedurationmaydifferfromthevaluesindicatedaboveasitdependsontheoperationconditionsapplicableatthattime(seealso
“TroubleshootingGuide”inyourInstructionsforUse).
* Toreducethewatertemperature,somecoldwaterisaddedattheendofthemainwashcycle,beforethepumpdrainsthewaterout.
** ReferenceProgrammesforEnergyLabel.
*** Automaticadaptionofprogrammedurationafterdetectionofwashload.
Programme
Tempe-
rature
(°C)
Load
(kg)
Water
(l)
Energy
without“Rapid”
(kWh)
Approx.ProgrammeDuration (hrs:min)
without“Rapid” with“Rapid”
Cotton/Hygienic+ 95 5.0 50* 1.70 2:05 –
Cotton** 60 5.0 47 0.89 2:45 2:10
Cotton** 60 2.5 32 0.68 2:10 ***
Cotton 40 5.0 47 0.65 2:00 1:45
Cotton** 40 2.5 32 0.52 1:45 ***
Synthetics 60 3.0 50* 0.90 2:05 1:14
Synthetics 40 3.0 40 0.50 1:50 0:59
Delicates 40 1.5 50 0.55 0:45 –
Dailyload 40 3.0 40 0.45 1:00 –
Quickwash15´ 30 3.0 30 0.15 0:15 –
Wool 40 1.0 55 0.55 0:45 –
Handwash 40 1.0 40 0.40 0:35 –
Handwash 30 1.0 40 0.30 0:31 –
“DOOR OPEN” INDICATION
Beforestartingandafterendofaprogramme,thelamp
lightstoshowthethelidcanbeopened.Aslongasa
washprogrammeisrunning,thelidremainslockedand
mustonnoaccountbeforcedopen.Incaseyouhave
anurgentneedtoopenitduringarunningprogramme,
referto“Cancelarunningprogrammebeforetheend”.
CANCEL A RUNNING PROGRAMME BEFORE
THE END
The“Reset”buttoncancelsaprogrammebeforethe
end.Pressthe“Reset” buttonforatleast3seconds.
Anyexistingwaterisdrainedoutbeforethedoorcanbe
opened.
START DELAY
The“Startdelay”buttonallowstheusertorunthe
machineathisconvenience,forexampleatnightwhen
electricityischeaper.
• Selectprogramme,spinspeedandoptions.
• Pressthe“Startdelay”buttonseveraltimestoselect
adelaytimeby1to23hours.
• Starttheprogramme(see“ProgremmeStart”).The
indicationlampoverthe“Startdelay”buttonlights
upandgoesoffwhentheprogrammestarts.
• Oncehavingpressedthe“Start/Pause”button,
thecountdownofthetimedelaybegins.Thetime
delayindicationonthedisplaydisappearswhenthe
programmestartsandisreplacedbytheremainingtime.
• Afterthe“Start/Pause”buttonhasbeenpressed,
thenumberofhourspreselectedcanbereducedby
pressingagainthe“Startdelay”button.
To cancel the “Start delay”
..before you press the “Start/Pause” button:
• Turntheprogrammeselectortoanotherpositionor
pressthe“Reset”button.
..after having pressed the “Start/Pause” button:
• Pressthe“Reset”buttonforatleast3second.The
startdelayindicatorlightgoesoff.
PROGRAMME START
Openthetapandpressthe“Start/Pause” button.
Theindicationlampnexttothe“Start/Pause” button
lightsup.Theprogrammesequenceindicatorshowsthe
currentprogrammephase,runningfromlefttoright
throughWash,Rinse,Spin/Drain.Whentheprogramme
phraseisfinised,thecorrespondingindicationgoesout.
• Note: Ifthereisapowerinterruptionorifthe
applianceisdisconnectedduringthecycle,the
programmewillrunagainfromthepointwhereit
wasinterrupted.
PROGRAMME END
• Allthelightsoftheprogrammesequenceindicator
areoff,andthe“Dooropen”indicationlightsup.
1. 1Turntheprogrammeselectortothe“Off/O”
position.
2. Closethewatertap.
3. Openlidanddrumandunloadthemachine.
4. Leavethelidopenforsometimetoallowtheinterior
ofthemachinetodry.
CHANGE PROGRAMME AND/OR OPTIONS
AFTER PROGRAMME START
1. Pressthe“Start(Pause)” buttontopausethe
programme.Thelightblinks.
2. Selectthenewprogramme,temperature,any
optionsandanotherspinspeedifyouwant.
3. Pressthe“Start(Pause)” buttonagain.Thenew
programmecontinuesatthesamepositionwherethe
previousprogrammewasinterrupted.Donotadd
detergentforthisprogramme.
FAILURE INDICATIONS
Incaseofanyfailuresorirregularities,consultthe
“TroubleshootingGuide”inyourInstructionsforUse.
“Service”
Lightingupofthe“Service”indicationcanbecaused
byafaultinanelectricalcomponent.Refertothe
“TroubleshootingGuide”inyour“InstructionsforUse”;
ifthefaultpersists,contactourAfterSalesService.
“Water tap closed”
Theappliancehasnoorinsufficientwatersupply.Open
thewatertap:iftheindicationsstilllightsup,refertothe
“TroubleshootingGuide”intheInstructionsforUse.
“Clean pump”
Wastewaterisnotpumpedout.Checkwhetherthe
drainhoseiskinkedorthefiltermustbecleaned:inthe
lattercaserefertotheInstructionsforUse(“Removing
theFilter”).
1. Loadthemachine,closethedrumdoorsandcheck
thattheyareproperlylocked.
2. Adddetergentasindicatedanthefrontpageandas
describedinthechapter“DetergentandAdditives”
inyourInstructionsforUse.
3. Closethelid.
4. Turntheprogramme selectortothedesired
programmeandtemperature.Thetimedisplay
showsthedurationofthechosenprogramme(in
hoursandminutes),andthelampnexttothe
“Start”buttonflashes.Theindicationlampofthe
predefinedspinspeedlightsup.