Battery Installation
Formula Racer SC4 Battery Installation
1. Use a phillips screwdriver to unscrew the battery cover from the SC4.
2. Attach the rechargeable battery to the connector.
3. Replace the battery cover and screw back on the battery cover.
*When removing the battery to charge, take care to unclasp the connector before pulling it off.
Remote Battery Installation
1. Use a small phillips head screwdriver to remove the battery cover.
2. Place two AA’s with the corresponding polarities as labeled on the unit.
Battery Warnings
1. Batteries must be loaded with the right corresponding positive and negative electrodes.
2. Do not mix old and new batteries.
3. Do not mix different types of batteries (types or brands).