2. PROAIM
  3. TP-FWBS-01

PROAIM TP-FWBS-01 User manual

  • Hello, I'm your chat assistant, and I've reviewed the Assembly Manual for the Proaim Folding Wheel Base Stand, model TP-FWBS-01. This stand features a foldable wheeled base, a 5/8" pin mount, and a maximum height of 103.9 inches with foot-lockable caster wheels. I'm ready to answer your questions about its assembly and features.
  • What is the maximum height of the stand?
    What type of mounting pin does the stand have?
    Does the stand come with wheels?
    Does the stand have a brake?
1
Please inspect the contents of your shipped package to ensure you have received everything that is listed
below.
5/8” Folding Wheel Base Stand for Lights & Studio
Photography | Max. Height: 8.6 Feet (TP-FWBS-01)
Assembly Manual
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any means,
electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permied by the applicable copyright
statutes or in wring by the Publisher.
What’s In The Box
Proaim 5/8” Folding Wheel Base Stand
2
Folding Wheel Base Stand Setup
• Take out the folding wheel and spread it on
oor and open the legs (as per your
requirement) of wheels with the help of
provided Study Locking knob.
• Aer spreading the foldable wheel base stand
on the oor, secure the stand by pressing
down on the foot brake to secure it properly.
Note: The portable stand comes equipped with
3" locking castor wheels that make it a lot easier
to move around the studio with lights and other
gears. And each wheel has a customized
footbrake that locks and steadies the stand.
• Posion the height of the Stand by loosening
all adjustment Locking knobs, Extend the
length of the stand up to the desired height
and re-ghten the knobs securely as shown in
the image.
Feature: It is a 3-secon stand with a stable
base and legs that fold up with a quick pull of a
lever, making it super easy to carry around at
set and on-locaon. The stand rises to a
maximum height of 103.9 inch and has built-in
solid locks to steady the stand's height.
NOTE: It is a solid stand on wheels that is
perfect to use with all major photography
equipment like lights, reectors, umbrellas, so
boxes, backgrounds, etc. It has a 5/8" baby pin
at the top for mounng dierent photography
equipment like lights, reectors, so boxes, or
even a Camera Stabilizer System & Gimbals with
their support accessories.
3
YOUR PROAIM 5/8” FOLDING WHEEL BASE STAND
FOR LIGHTS & STUDIO PHOTOGRAPHY
ALL DRESSED UP AND READY TO GO!
(SHOWN WITH OPTIONAL ACCESSORIES)
Warranty: We oer one year warranty for our products from date of purchase. Within this period of me,
we will repair it without charge for labor or parts. Warranty doesn’t cover transportaon costs nor does it
cover a product subjected to misuse or accidental damage. Warranty repairs are subjected to inspecon and
evaluaon by us.
Liability: We are not liable for damage caused by products that we do not supply or from mishandling in
transit, accident, misuse, neglect, lack of care of the product, or service by anyone other than our company.
Contact Us: In case of any kind of dissasfacon, please Contact us immediately and we promise our utmost
support and care unl you use our product.
/