Avol AET55100UM User manual

Model No.: AET55120UM

55" Full HD 100/120Hz Multi System LED TV

Attention;

Please Kindly refer to "TV Broadcasting system"(Page 9 of User's manual) for choosing suitable

TV broadcasting system as per your living area when you use this unit firstly.TV Color system is

automatically searched regardless of your living area.

Contents

Caution

Safety Information

Accessories

Technical Specification

Product Introduction

Front View

Wall Mounting

OSD Menu

1. Channel menu

2. Picture menu

3. Sound menu

4. Time menu

5. OPTION menu

1

2

3

4

5

4

9-14

9-10

11

12

13

14

Connections

6-7

Remote Control

8

Basic Operation

Multimedia Operation 15-18

Simple Troubleshooting 19

Caution

Correct disposal of this Product

(Waste Electrical & Electronic Equipment (WEEE)

Your product is designed and manufactured with high quality materials and

components which can be recycled and reused.

This symbol means that electrical and electronic equipment, at their end-

of-life should be disposed of separately from your household waste.

Please dispose of this equipment at your local community waste collection/

recycling center.

In the USA there are separate collection systems for used electrical and

electronic products. Please help us to conserve the environment we live in!

1

Caution

The exclamation point within an equilateral triangle is intend to alert the

user to the presence of important operating and maintenance (servicing)

instructions in the literature accompanying the appliance.

The lightning flash with arrowhead symbol, within an equilateral triangle

is intended to alert the user to the presence of un-insulated “dangerous

voltage” within the products enclosure that may be of sufficient magnitude

to constitute a risk of electric shock to the persons.

directives.

This unit complies with The Restriction of the use of certain Hazardous

substances in Electnical and Electronic Equipment

Safety Information

To ensure reliable and safe operation of this equipment, please read carefully all the

instructions in this user guide, especially the safety information below.

Electrical safety

• The TV set should only be connected to a main supply which matches that stated on

the label on the mains adaptor.

• To prevent overload, don't share the same main supply socket with too many other

items of equipment.

- Do not place any connecting wires where they may be stepped on or tripped over.

- Do not place heavy items on the leads, which may damage them.

- Hold the Main plug, not the wires, when removing from a socket.

- During a thunderstorm or while leaving the TV for long periods, disconnect the aerial

(if outdoor) and mains adaptor from the supply.

- Do not allow water or moisture to enter the TV or mains adaptor. Do NOT use in wet

or moist areas such as Bathrooms, steamy kitchens or near swimming pools.

• Pull the plug out immediately, and seek professional help if:

- the main plug or cable is damaged.

- liquid is spilt onto the set, or if it is accidentally exposed to water or moisture.

- anything accidentally penetrates the ventilation slots.

- the set does not work normally.

- Do NOT remove the safety covers. There are no user serviceable parts inside.

You may invalidate the warranty. Qualified personnel only are permitted to service

this apparatus.

- To avoid battery leakage, remove exhausted batteries from the remote control

handset, or when not using for along period.

- Do NOT break open or throw exhausted batteries on a fire.

Physical safety

• Do NOT block ventilation slots in the back cover. You may place the TV in a cabinet,

but ensure at least 5cm (2") clearance all around the unit.

• Do NOT tap or shake the TV screen, you may damage the internal circuitry. Take good

care of the remote control, do not drop it or allow it to come into contact with liquids.

• To clean the TV use a soft dry cloth. Do NOT use solvents or petrol based fluids. For

stubborn stains, you may use a damp soft cloth with diluted detergent.

2

Safety Information

Accessories

3

Accessories & Technical Specification

Technical Specification

User’s Manual Remote control

* Note: The configuration of the components may look different from the following illustration

55 inch(diagonal)

1920X1080

2x8W

100-240V ~ 50/60Hz 200W

- Screen Size

- Resolution

- Aerial input

- Audio output power

- Power Consumption

- TV-System PAL/SECAM/NTSC

220V Power Socket

Din to F Connector

(Model no.: MA002)

PICTURE SOUND SLEEP DISPLAY

SOURCE

VOL+

VOL-

EXIT

MUTE

MENU

OK

CH+

CH-

123

456

789

0

CH.list

ROOT FAV

TV/TXT HOLD NICAM/A2

SIZEINDEX REVEALSUBPAGE

A-B

SUBTITLE

REPEAT

GOTO

SLOW

LANGUAGE

ZOOM

Converter cable for

AV

Converter cable for

YPbPr video

Product Introduction

4

Front View

POWER to turn on and off.

Indicator on(Green) Power on mode

Led Indicator Remote Control window

(Keep clear)

SOURCE MENU CH+ CH- VOL+ VOL- POWER

The TV is provided with mounting holes 400x400mm for a VESA approved wallmounting bracket (NOT

SUPPLIED). Remove the Posi screws holding the base to the base bracket and lift the base away (do not

remove the basemounting bracket).Mount the VESA bracket using 4xM6x12mm ISO metric threaded screws

(not supplied). Do not use screws longer than 12mm, it will occur damage to the internal parts. Fit the wall

bracket securely following themanufacturers instructions.

- Do not fasten the screws too tight for this may damage the TV or cause the TV to fall, resulting in personal

injury.

- Do not mount your TV at more than a 15 degree tilt.

- Always use two people to mount the TV to a wall.

- Do not install your Wall Mount Kit while your TV is turned on. It may result in personal injury due to electric

shock.

Wall Mounting

400mm

SOURCE:

MENU:

CH+/-:

Press to scan through channels.

VOL+/-:

POWER:

Connections

5

AC POWER IN : Connect to an earth 100-240V~ 50/60Hz outlet with the Power Cable.

USB: For service (software update) and MEDIA.

HDMI1/2/3 : Connect it to the HDMI output of the external devices.

VGA: For PC display.Connect it to the D-Sub 15 pins analog output connector of the PC.

PC in : Connect it to the audio output terminal of PC.

Coax: Digital audio output.

Headphone: Connect it to your headphone or other audio equipments.

MINI YPbPr : Connect them to the YPbPr video output terminal of the external devices with

MINI AV -VIDEO: Connect it to video output terminal of the external devices with the

RF: Connect antenna or cable 75 Ohm coaxial to receive TV signal.

MINI AV -R/L in: Connect them to the audio output terminal of the external devices with the

converter cable (shared with YPbPr).

USB HDMI3 HDMI2 HDMI1 SCART COAX

VGA PC-IN AV YPBPR Headphone RF

SCART˖Connect to the scart input / output of external devices.

the converter cable.

converter cable.

AC POWER IN

Remote Control

6

Remote Control

The remote control is using Infra-Red(IR). Point it towards the front of the TV. The remote

control may not work correctly if it is operated out of range or out of angle.

SOURCE : Source select.

POWER : Turn on/standby the TV

MUTE: Silence status

EXIT:Exit from the current menu

Cursor up/down keys in OSD menu

Cursor left/right keys in OSD menu

OK: Comfirm button

MENU : TV system menu

DISPLAY: Display playing status

PICTURE: Select the picture mode

SOUND : Select the sound mode

SLEEP: Time shutting down

PICTURE SOUND SLEEP DISPLAY

SOURCE

VOL+

VOL-

EXIT

MUTE

MENU

OK

CH+

CH-

123

456

789

0

CH.list

ROOT FAV

TV/TXT HOLD NICAM/A2

SIZEINDEX REVEALSUBPAGE

A-B

SUBTITLE

REPEAT

GOTO

SLOW

LANGUAGE

ZOOM

0-9,: Choose channel

: Go to program you latest program

CH/LIST: Display the p

ro

grams list.

CH+/-: Scan the channel.

VOL+/-:Volume up/down

Remote Control

7

Remote Control

: Play/Pause program

: Stop program

: fast reverse

: fast forward

: previous chapter

: next chapter

ROOT: Come back to the home page.

FAV: Display the favourite channel list.

ZOOM: Adjust picture size except USB mode.

LANGUAGE: Select USB disc language.

SLOW: Play USB programs at slow speed.

SUBTITLE: Turn on/off the subtitle display in USB mode.

GOTO : Play your favorite title/chapter/track.

REPEAT: Repeat playing the title or chapter.

A-B: Select and play the preferable paragraph of USB program

by pressing this key twice at the beginning and end of it.

PICTURE SOUND SLEEP DISPLAY

SOURCE

VOL+

VOL-

EXIT

MUTE

MENU

OK

CH+

CH-

123

456

789

0

CH.list

ROOT FAV

TV/TXT HOLD NICAM/A2

SIZEINDEX REVEALSUBPAGE

A-B

SUBTITLE

REPEAT

GOTO

SLOW

LANGUAGE

ZOOM

COLOUR BUTTONS : Short cuts-follow the coloured links in the text.

TV/TXT : Teletext on/off

REVEAL: Reveal any hidden text, for example-quiz answer.

NICAM/A2:NICAM/A2 select.

HOLD: Hold or carry on the current subpage

SIZE: Press to see top half of page double size, Press again to see the

bottom half of page double size.

Press again for normal size

INDEX: Direct recall of page 100

SUBPAGE: Go to subpage

button to select the function item, press button to adjust/setup,

Basic Operation

8

Basic Operation

Power on/off

1. Connect to the power supply with the power cord.

2. -To turn on the TV

Press POWER button on the TV or remote control.

-To turn off theTV

Input Source select

Note: Before you select the input source, make sure the

connections are prepared.

Basic OSD Menu operation

Press MENU button to display the OSD menu as below:

Use /

Ĥ

/

ĥ

Ĥ

ĥ

button to select the main menu, and press button to enter the submenu.

In the submenu, use /

Ĥĥ

ĥ

or press OK button to enter the submenu.

* (Press MENU button to return to the upper menu.)

* (Press EXIT button to exit the menu display.)

Note1: Only when you input the suitable signal, the relevant items can be activated

Note2: Please operating the OSD menu according to hint on the bottom of the banner.

Main menu

CHANNEL

PICTURE

SOUND

TIME

OPTION

Submenu

(PICTURE

menu for

example)

Hint---you should operate the OSD menu according to the hint.

ATV

AV

SCART

YPBPR

VGA

HDMI1

HDMI2

HDMI3

USB

Press Source button on the TV set or on the remote control to display

the input source menu and use CH+/- on the TV set or CH+/- button

on the remote to select the input source.

Press OK button on the remote to enter

OSD Menu

9

OSD Menu

1. CHANNEL menu

Description

Auto Scan

Press OK button to start auto tuning.

You could press MENU/EXIT button to exit the process of

tuning, there will be a hint on the screen, and you should

press button to confirm, or press button to cancel

the operation.

ATV Manual Tuning

Press OK button to enter the ATV Manual Tuning menu.

Storage to: Select a Channel for storing the

programme.

System: Select the color & sound system.

Current CH: Select the the channel for edit.

Ĥ

ĥ

Search: Press / button to manual search.

Fine Tune: Press / button to fine-tune.

Ĥ

ĥ

Ĥ

ĥ

COLOR TV BROADCASTING SYSTEM

Country Color System Sound System

AZORES(PORTUGAL)

BALKANS(KOSOVO, BOSNIA)

BELGIUM/GERMANY/ITALY

IRAQ

AFGHANISTAN

NETHERLANDS/NORWAY

SAUDI ARABIA

KUWAIT/TURKEY/JORDAN

UNITED KINGDOM

CZECH/HUNGARY/POLAND

RUSSIA

PAL

SECAM

NTSC

B/G

B

B/G

B

I

D/K

MU.S.A./JAPAN/KOREA/GUAM

OSD Menu

10

OSD Menu

Programme Edit

Press OK button to enter the Programme Edit menu as the following picture.

Delete: Select a channel and press RED button to delete.

by buttons.

Ĥ

ĥ

Ĥĥ

Rename: Select an channel and press the GREEN button to change the name of the channel

Fav: Select a channel, and press FAV button on the remote control to set/cancel the channel

as the favourite channel.

Swap: Select a channel, and press YELLOW button to highlight the channel, then you can use

Ĥĥ

and buttons to select the channel you want to be swapped, press OK button to confirm.

Skip: Select a channel and press the BLUE button to label the channel, as long as the channel

has a skip label it will be skipped when searching through the channels with the CH+/- buttons.

OSD Menu

11

OSD Menu

2. PICTURE menu

Description

Picture Mode: Choose from Standard, Dynamic, User and Mild.

Note: Contrast, Brightness, Color and sharpness are only available and can be adjusted in

the User mode option in the Picture Mode Settings.

Contrast: Controls the difference between the brightest and darkest regions of the picture.

Brightness: Controls the overall brightness of the picture.

Color: Control the color.

Sharpness: Increase this setting to see crisp edges in the picture; decrease it for soft edges.

Tint: Controls the tint ( NTSC mode only).

Note: RED, GREEN and BLUE are only available and can be adjusted in the User mode

option in the Color Temperature Settings.

Color Temperature: Choose from Medium, Cool, Warm and User.

Noise Reduction: Turn on/off the funciton for reduce the noise of the TV signal.

Aspect Ratio: Select the picture display mode in the screen.

PC Setting : Change the PC settings in the PC mode.

OSD Menu

12

OSD Menu

3. SOUND menu

Description

Sound Mode: Allows you to select among: Standard, Music, Movie, Sports and User.

Treble(Can be adjusted when the sound mode is User):Controls the relative intensity of

higher pitched sounds.

Bass (Can be adjusted when the sound mode is set to User): Controls the relative intensity of

lower pitched sounds.

Balance: To adjust the balance of the left and right sound track, or turn off the volume of the

left and right sound track.

Surround Sound: Turn on/off the surround sound function.

OSD Menu

13

OSD Menu

4. TIME menu

Description

Clock: Use the and buttons to select the position, and use the and buttons to set the

time.

Off Time: Press OK button to enter the submenu, you could set the time when the TV set will

be turned off automatically, you could also set the frequency.

On Time: Press OK button to enter the submenu, you could set the time when the TV set will

be turned on automatically, you could also set the frequency, volume and program.

Sleep Timer: Allows you to setup the sleep timer among: 10min, 20min, 30min, 60min, 90min,

120min,180min, 240min and off.

Auto Sleep: Turn on/off the auto standby function.

OSD Menu

14

OSD Menu

5. OPTION menu

Description

OSD Duration: Allows you to select the time for the OSD display on the screen.

OSD Language: Allows you to select menu language.

Blue Screen: Turn on/off the blue screen function when there’s no signal.

Restore Dafault: Press OK button to restore factory default.

TTX Language: Allows you to select teletext language.

NICAM reception(option)

If your set is equipped with the receiver for NICAM reception, the high quality NICAM (Near Instaneous)

Companding Audio Multiplex digital sound can be received.

Sound output can be selected according to the type of received broadcast as follows by pressing the I/II

1. When NICAM mono is received, you can only select MONO.

2. When NICAM stereo is received, you can select NICAM STEREO or MONO. If the stereo signal is weak,

3. When NICAM dual is received, you can select NICAM DUAL I,NICAM DUAL II or MONO.

A2 Stereo is supported in this model.

y.

button repeatedl

switch to mono.

MEMC: Select MEMC from Normal, Demo, Strong and Off .

Memc Mode Off

Multimedia Operation

15

Multimedia Operation

Basic Operation

1). Press the SOURCE button on the remote control to display the input source menu, select USB

source by the / buttons, and press OK button to enter the Multimedia menu seen below.

Ĥ

ĥ

Press / / / buttons to move , and press OK button to select the file or unfold the folder,

Then press button to program the files (be signed) you select or the files in the fold you select,

You can display the option table on the bottom of the screen by DISPLAY button, press

button to hide. Press button to stop and exit the full screen program.

2). Insert USB device, you will find the name of the device display on the screen.

3). Press / button to select the kind of the files in the device you want to program from PHOTO,

MUSIC, MOVIE and TEXT. Press / button to select the device and press OK button to enter.

MAINS MENU

PHOTO MUSIC MOVIE TEXT

MAINS MENU

PHOTO MUSIC MOVIE TEXT

Preview

Hints for operation

Return to

device list

Up Folder

USB device list

Informations

ATV

AV

SCART

YPBPR

VGA

HDMI1

HDMI2

HDMI3

USB

Multimedia Operation

16

Multimedia Operation

1. Photo

2. Music

Press / button to select the option on the table, and press OK button to change.

Repeat: Select the repeat mode from Repeat All, Repeat 1, Repeat None.

Playlist: Display the playlist on the screen, and you can select the photo by / button, and

press OK button to program. Press / button to return to the options table.

Info: Display the information of the photo.

Rotate: Rotate the photo clockwise/counterclockwise.

Note : Please refer to page 18 for supported format.

Note:Press “NEXT ”and “PREV ”

Press / button to select the option on the table, and press OK button to change.

Press / button to select the music, and press OK button to program.

Repeat ALL: Select the repeat mode from Repeat All, Repeat 1, Repeat None.

Play the photo

Play the music

Search

Screen Saver

Goto Time: Program the movie form the time you set.

Press DISPLAY button to display playing list.

Note : Please refer to page 18 for supported format.

to move to next or previous photo files.

Multimedia Operation

17

Multimedia Operation

3. Movie

4. Text

Press / button to select the option on the table, and press OK button to change.

Repeat ALL: Select the repeat mode from Repeat All, Repeat 1, Repeat None.

None A-B: Select and play the preferable paragraph of the program by seting A and B at the

beginning and end, and there will be a sign on the left screen, press OK button again to cancel.

Playlist: Display the playlist on the screen.

Info: Display the information of the movie.

Slow: Play the programs at slow speed, press button to cancel.

Step: Step the programs by OK button, press button to cancel.

Press / button to select the option on the table, and press OK button to change.

Prev/Next page: Turn to previous/next page of the text.

Prev./Next: Turn to previous/next file.

Stop: Stop auto turning pages.

Playlist: Display the playlist on the screen.

Info: Display the information of the text.

Play the movie

Play the text

Goto Time: Program the movie form the time you set.

Note : Please refer to page 18 for supported format.

For "TEXT" file, it support TXT only.

Page is loading ...

Avol AET55100UM User manual

Avol AET55100UM User manual

Related papers

Other documents