Jura Impressa F7 Owner's manual

Brand: Jura

Model: Impressa F7

Category: Coffee makers

Type: Owner's manual

IMPRESSA F7 Instructions for Use

The Instructions for use has been awarded the seal of

approval by the independent German Technical Inspection

Agency, TÜV SÜD, due to its easy-to-understand style, its

thoroughness and coverage of safety aspects.

Table of contents

Control elements 4

Important information 6

Proper use ......................................................................................................................................................6

For your safety ...............................................................................................................................................6

1 Preparing and using for the first time 10

JURA on the Internet .................................................................................................................................... 10

Setting up the machine ..............................................................................................................................10

Filling the bean container ........................................................................................................................... 10

First-time use ................................................................................................................................................10

Determining the water hardness ..............................................................................................................13

Adjusting the grinder ..................................................................................................................................14

Filling the water tank ................................................................................................................................... 14

2 Preparation 15

Ristretto, espresso and coffee .................................................................................................................... 15

Two speciality coffees at the touch of a button ......................................................................................16

Cappuccino....................................................................................................................................................16

Milk foam .......................................................................................................................................................17

Ground coffee ...............................................................................................................................................18

Permanently setting the amount of water for the cup size .................................................................19

Hot water ......................................................................................................................................................20

3 Daily operation 21

Switching on .................................................................................................................................................21

Daily maintenance .......................................................................................................................................21

Switching off ................................................................................................................................................22

4 Permanent settings in programming mode 23

Product settings ..........................................................................................................................................24

Setting the water hardness .......................................................................................................................25

Energy-saving mode ..................................................................................................................................26

Automatic switch-off .................................................................................................................................. 27

Rinses ............................................................................................................................................................27

Restore factory settings .............................................................................................................................28

Querying information ................................................................................................................................29

Unit for amount of water ...........................................................................................................................30

Language ....................................................................................................................................................... 31

5 Maintenance 32

Rinsing the machine ...................................................................................................................................32

Rinsing the fine foam frother ....................................................................................................................33

Cleaning the fine foam frother .................................................................................................................33

Dismantling and rinsing the fine foam frother......................................................................................34

Your IMPRESSA F7

Table of contents

Warnings

J WARNING

J CAUTION

Always take note of any information marked with the words CAUTION or

WARNING and a warning sign. The signal word WARNING draws your

attention to potential serious injury, and the signal word CAUTION to

potential minor injury.

CAUTION CAUTION draws your attention to potential damage to the machine.

Symbols used

TPrompt to take action. This symbol means that you are being prompted to

perform some action.

EInformation and tips to make it even easier to use your IMPRESSA.

1ESPRESSO Display

Symbol description

Dismantling and rinsing the professional fine foam frother ...............................................................35

Inserting and activating the filter .............................................................................................................36

Changing the filter ...................................................................................................................................... 37

Cleaning the machine ................................................................................................................................38

Descaling the machine ..............................................................................................................................39

Cleaning the bean container ..................................................................................................................... 42

Descaling the water tank ...........................................................................................................................42

6 Display messages 43

7 Troubleshooting 44

8 Transport and environmentally friendly disposal 46

Transport/ Emptying the system .............................................................................................................46

Disposal ......................................................................................................................................................... 46

9 Technical data 47

10 Index 48

11 JURA contact details/ Legal information 52

Control elements

1 Bean container with aroma preservation

cover

2 Water tank cover

3 Water tank

4 Power switch and mains cable

(back of the machine)

5 Coffee grounds container

6 Drip tray

7 Cup grille

8 Filler funnel cover

9 Filler funnel for ground coffee

10 Storage compartment cover

11 Grinder adjustment switch

12 Measuring spoon for ground coffee

13 Height-adjustable hot-water nozzle

14 Switch for hot water and steam

preparation

15 Connector System© for removable

frothers

16 Fine foam frother

17 Height-adjustable coffee spout

Control elements

31 2

Top of the machine

1 Q On/Off button

2 g Rotary Switch

3 c Maintenance button

Front

4 Display

5 Preparation buttons

Y Ristretto button

< Espresso button

> Coffee button

§ Hot Water button

n Steam button

* Cappuccino button

The Connector System© permits the use of different cappuccino frothers. These are available

from stockists.

Professional fine foam frother Fine foam frother

Milk foam

Hot milk

Milk foam

Important information

The machine is designed and intended for private

domestic use. It should only be used for coffee

preparation and to heat milk and water. Use for any

other purpose will be deemed improper. JURA

Elektroapparate AG cannot accept any responsibil-

ity for the consequences of improper use.

Before using the machine read these instructions

for use thoroughly and completely and comply

with the instructions they contain. A warranty ser-

vice is not applicable for damage or defects caused

by non-compliance with the instructions for use.

Keep these instructions for use close to the machine

and pass them on to the next user.

Please carefully read and observe the important

safety information set out below.

To avoid danger of potentially fatal electric shock:

UNever use a machine which is damaged or has

a defective mains cable.

UIn the event of signs of damage, for example if

there is a smell of burning, unplug the machine

immediately from the mains supply and con-

tact JURA service.

UIf the mains cable of this machine is damaged,

it must be repaired either directly by JURA or

by an authorised JURA service centre.

UMake sure that the IMPRESSA and the mains

cable are not located close to hot surfaces.

UBe careful to ensure that the mains cable is not

trapped and does not rub against sharp edges.

Proper use

For your safety

Important information

UNever open and repair the machine yourself.

Do not modify the machine in any way that is

not described in these instructions for use. The

machine contains live parts. If opened, there is

a danger of potentially fatal injury. Repairs

may only be carried out by authorised JURA

service centres, using original spare parts and

accessories.

UTo completely and safely disconnect the

machine from the power supply, first switch

off the IMPRESSA using the On/Off button and

then at the power switch. Only then should

you remove the mains plug from the power

socket.

There is a risk of scalds or burns on the spouts and

fine foam frother:

UPlace the machine out of the reach of children.

UDo not touch any hot parts. Use the handles

provided.

UBe careful to ensure that the fine foam frother

is correctly installed and clean. If incorrectly

fitted or if it becomes blocked, the fine foam

frother or its parts might come off.

A defective machine is not safe and could cause

injury or fire. To avoid damage and any associated

risk of injury or fire:

UNever allow the mains cable to loosely hang

down. The mains cable could pose a tripping

hazard or become damaged.

UProtect the IMPRESSA from environmental

influences such as rain, frost and direct sun-

light.

UDo not immerse the IMPRESSA, mains cable or

connections in water.

Important information

UDo not put the IMPRESSA or any individual

parts in the dishwasher.

USwitch your IMPRESSA off at the power switch

before any cleaning operation. Always wipe

the IMPRESSA with a damp cloth rather than a

wet one, and protect it from prolonged expo-

sure to water splash.

UOnly connect the machine to the mains volt-

age in accordance with the information on the

rating plate. The rating plate is located on the

underside of your IMPRESSA. Further technical

data is provided in these instructions for use

(see Chapter 9 ‘Technical data’).

UPlease only use original JURA maintenance

products. Use of products that are not explic-

itly recommended by JURA could damage the

IMPRESSA.

UDo not use any coffee beans treated with addi-

tives or caramelised coffee beans.

UOnly fill the water tank with fresh, cold water.

USwitch the machine off at the power switch if

you are going to be absent for a longer period

of time.

UChildren may not clean or service the machine

unless supervised by a responsible person.

UDo not allow children to play with the machine.

UKeep children under the age of 8 away from

the machine, or supervise them constantly.

UChildren aged 8 and over may only operate

the machine without supervision if they have

been instructed in how to use it safely. Chil-

dren must be able to recognise and under-

stand the potential dangers arising from incor-

rect use.

Important information

People, including children, who

Udo not have the physical, sensory or mental

capabilities to use the machine safely or

Uare inexperienced or lack knowledge in how to

use the machine safely

must be supervised by a responsible person when

using it, or must be instructed in how to use it cor-

rectly.

Safety when handling the CLARIS Blue filter car-

tridge:

UFilter cartridges should be kept out of the

reach of children.

UStore filter cartridges in a dry place in the

sealed packaging.

UProtect cartridges from heat and direct sun-

light.

UDo not use damaged filter cartridges.

UDo not open filter cartridges.

1 Preparing and using for the first time

Visit us on the Internet. You can download short operating instruc-

tions for your machine from the JURA website (www.jura.com). You

will also find interesting and up-to-date information on your

IMPRESSA and on every aspect of coffee.

When setting up your IMPRESSA, please note the following:

UPlace the IMPRESSA on a horizontal surface that is not sensi-

tive to water.

UChoose a spot for your IMPRESSA which protects the machine

against overheating. Ensure that the ventilation slots are not

covered.

Coffee beans which have been treated with additives (e.g. sugar),

ground coffee or freeze-dried coffee will damage the grinder.

T Only use untreated coffee beans to fill the bean container.

T Remove the aroma preservation cover.

T Remove any dirt or foreign objects from inside the bean

container.

T Fill the bean container with coffee beans and close the

aroma preservation cover.

When using the machine for the first time, you can choose whether

you want to operate IMPRESSA with or without the CLARIS Blue fil-

ter cartridge. If the water hardness is 10°dH or more, we recommend

using the filter cartridge. If you do not know the hardness of your

water, you can find this out first (see Chapter 1 ‘Preparing and using

for the first time – Determining the water hardness’).

If the machine is operated with a defective mains cable, there is a

danger of potentially fatal electric shock.

T Never use a machine which is damaged or has a defective

mains cable.

JURA on the Internet

Setting up the machine

Filling the bean container

CAUTION

First-time use

J WARNING

1 Preparing and using for the first time

Precondition:The bean container has been filled.

T Insert the mains plug into a power socket.

 3 T Switch on the IMPRESSA using the power switch on the back

of the machine.

 Q T Press the On/Off button to switch the IMPRESSA on.

SPRACHE DEUTSCH appears on the display.

 g T Turn the Rotary Switch until the required language is dis-

played, e.g. LANGUAGE ENGLISH.

 k T Press the Rotary Switch to confirm the language.

OK appears briefly on the display to confirm the setting.

FILTERw YES

ENow decide whether you want to operate your IMPRESSA with

or without a CLARIS Blue filter cartridge.

 k T Press the Rotary Switch.

OK appears briefly on the display.

FILTER INSERT

 k T Press the Rotary Switch.

FILL WATER TANK

T Open the water tank cover.

T Remove the water tank and rinse it with cold water.

T Open the filter holder.

T Remove the CLARIS Blue filter cartridge from the Welcome

Pack.

T Insert the CLARIS Blue filter cartridge into the water tank,

exerting slight pressure.

T Close the filter holder. It will click into place audibly.

EAfter two months, the filter will cease to work. Set the date on

the date plate on the filter holder in the water tank.

T Fill the water tank with fresh, cold water and reinsert the

tank.

SWITCH OPEN

The arrow on the switch lights up.

First-time use with filter

cartridge activation

1 Preparing and using for the first time

T Place a receptacle (at least 300 ml) under the fine foam

frother and the coffee spout.

 j T Turn the switch to them position.

FILTER RINSING, water flows out of the fine foam

frother.

EYou can interrupt rinsing of the filter at any time. To do this,

turn the switch clockwise. Turn the switch anticlockwise to

continue rinsing the filter.

EThe water may be slightly discoloured. This is not harmful to

health and does not affect the taste.

Rinsing of the filter stops automatically after approximately

300ml. SWITCH CLOSE appears on the display.

 h T Turn the switch to the °position.

The illuminated arrow on the switch goes out.

SYSTEM FILLING, the system fills up with water.

HEATING, the machine heats up.

RINSING, the system is rinsed. The rinse stops automat-

ically. READY appears on the display. Your IMPRESSA is

ready for use.

 g T Turn the Rotary Switch until FILTER- NO is displayed.

 k T Press the Rotary Switch.

OK appears briefly on the display.

16°dH

EIf you do not know the hardness of your water, you must find

this out first (see Chapter 1 ‘Preparing and using for the first

time – Determining the water hardness’).

 g T Turn the Rotary Switch to change the water hardness set-

ting, e.g. to 25°dH.

 k T Press the Rotary Switch.

OK appears briefly on the display.

FILL WATER TANK

T Open the water tank cover.

T Remove the water tank and rinse it with cold water.

First-time use without filter

cartridge activation

1 Preparing and using for the first time

T Fill the water tank with fresh, cold water and reinsert the

tank.

SWITCH OPEN

The arrow on the switch lights up.

T Place a receptacle under the fine foam frother and under the

coffee spout.

 j T Turn the switch to them position.

SYSTEM FILLING, the system fills up with water.

SWITCH CLOSE

 h T Turn the switch to the °position.

The illuminated arrow on the switch goes out.

SYSTEM FILLING, the system fills up with water.

HEATING, the machine heats up.

RINSING, the system is rinsed. The rinse stops automat-

ically. READY appears on the display. Your IMPRESSA is

ready for use.

You can find out what the water hardness is by using the Aquadur®

test strip supplied as standard.

T Hold the test strip briefly (for 1second) under flowing water.

Shake off the water.

T Wait for about 1minute.

T You will then be able to read the degree of water hardness

from the discolouration of the Aquadur® test strip and the

description on the packaging.

Determining the water

hardness

1 Preparing and using for the first time

You can adjust the grinder on a continuous scale to suit the degree

of roast of your coffee.

If you adjust the consistency of grind when the grinder is not oper-

ating, the grinder adjustment switch could be damaged.

T Only adjust the consistency of grind when the grinder is run-

ning.

The consistency of grind is correct if the coffee flows regularly from

the coffee spout. In addition a fine, thick crema forms.

Example: Proceed as follows to change the consistency of grind

during the preparation of an espresso.

T Place a cup under the coffee spout.

T Open the storage compartment cover.

 < T Press the Espresso button to start preparation.

T Turn the grinder adjustment switch to the desired position

while the grinder is running.

The preset amount of water flows into the cup. Preparation

stops automatically.

T Close the storage compartment cover.

Daily maintenance of the machine and hygiene when handling milk,

coffee and water are key to a perfect coffee result in the cup every

time. You should therefore change the water daily.

Milk, sparkling mineral water or other liquids can damage the water

tank or the machine.

T Only fill the water tank with fresh, cold water.

T Open the water tank cover.

T Remove the water tank and rinse it with cold water.

T Fill the water tank with fresh, cold water and reinsert the

tank.

T Close the water tank cover.

Adjusting the grinder

CAUTION

Filling the water tank

CAUTION

2 Preparation

EYou can stop the machine at any time while a speciality coffee,

steam or hot water is being prepared. Just press any button

(for a speciality coffee) or return the switch to its original posi-

tion (for steam and hot water).

EBefore the grinding operation you can select the coffee

strength by turning the Rotary Switch g: MILD, NORMAL,

STRONG or EXTRA.

EDuring the grinding operation you can select the coffee

strength of single products by turning the Rotary Switch g.

EDuring preparation, you can change the preset amount of

water or steam by turning the Rotary Switch g.

EYou can follow the current status of preparation on the pro-

gress bar.

Coffee tastes best served hot. A cold porcelain cup cools the bever-

age – and impairs the taste. We therefore recommend prewarming

the cups. The full coffee aroma can develop only in prewarmed cups.

You can purchase a JURA cup warmer from your specialised dealer.

You can make permanent settings for all products in programming

mode (see Chapter 4 ‘Permanent settings in programming mode –

Product settings’).

Ristretto Y, espresso < and coffee > are all prepared following this

model.

Example:Proceed as follows to prepare one coffee.

Precondition:READY is displayed.

T Place a cup under the coffee spout.

 > T Press the Coffee button.

Preparation starts. 1COFFEE and the coffee strength are

displayed. The preset amount of water for coffee flows into

the cup.

Preparation stops automatically. READY appears on the

display.

Ristretto, espresso and

coffee

2 Preparation

Two ristretti, two espressi or two coffees can always be prepared fol-

lowing the same model: Press the preparation button you want

twice within two seconds.

Your IMPRESSA can prepare a cappuccino without the cup having to

be moved.

EThis chapter applies to the professional fine foam frother and

the fine foam frother.

Example:Proceed as follows to prepare one cappuccino.

Precondition:READY is displayed.

T Remove the protective cover from the fine foam frother.

T Connect the milk pipe to the fine foam frother. Use the short

pipe for a milk container and the long pipe for a milk carton.

T Connect the other end of the milk pipe to a milk container

or immerse it in a milk carton.

T Place a cup under the coffee spout and the fine foam frother.

(Figure: Optional JURA Cool Control Basic 0.6 l)

EEnsure that the filling height of the milk is no higher than the

milk pipe connection on the fine foam frother.

EIf you are using the professional fine foam frother, turn the

selector switch to the Milk Foam positioné.

 * T Press the Cappuccino button.

NORMAL

HEATING/ STEAM

As soon as the machine has heated up, SWITCH OPEN

appears.

The arrow on the switch lights up.

 j T Turn the switch to them position.

CAPPUCCINO, the milk foam is prepared. Preparation

stops automatically when the preset amount of steam is

reached.

SWITCH CLOSE

Two speciality coffees at

the touch of a button

Cappuccino

2 Preparation

 h T Turn the switch to the °position.

The illuminated arrow on the switch goes out.

CAPPUCCINO appears on the display.

Coffee preparation starts. The preset amount of water for

espresso flows into the cup.

Preparation stops automatically. READY appears on the

display.

To ensure that the fine foam frother always works properly, you must

clean it daily when you have been preparing milk (see Chapter 5

‘Maintenance – Cleaning the fine foam frother’). Your IMPRESSA will

not prompt you to clean the fine foam frother.

EThis chapter applies to the professional fine foam frother and

the fine foam frother.

EWith the professional fine foam frother, available as an

optional accessory, you can also prepare hot milk.

Example:Proceed as follows to prepare milk foam.

Precondition:READY is displayed.

T Remove the protective cover from the fine foam frother.

T Connect the milk pipe to the fine foam frother. Use the short

pipe for a milk container and the long pipe for a milk carton.

T Connect the other end of the milk pipe to a milk container

or immerse it in a milk carton.

T Place a cup under the fine foam frother. (Figure: Optional

JURA Cool Control Basic 0.6 l)

EEnsure that the filling height of the milk is no higher than the

milk pipe connection on the fine foam frother.

EIf you are using the professional fine foam frother, turn the

selector switch to the Milk Foam positioné.

 n T Press the Steam button.

HEATING/ STEAM

As soon as the machine has heated up, READY/ STEAM

appears.

The arrow on the switch lights up.

Milk foam

2 Preparation

 j T Turn the switch to them position.

STEAM, the milk foam is prepared. Preparation stops auto-

matically when the preset amount of steam is reached.

SWITCH CLOSE

 h T Turn the switch to the °position.

The illuminated arrow on the switch goes out. READY/

STEAM appears on the display.

EYou can continue to prepare steam for the next 40 seconds or

so without the machine having to heat up again.

To ensure that the fine foam frother always works properly, you must

clean it daily when you have been preparing milk (see Chapter 5

‘Maintenance – Cleaning the fine foam frother’). Your IMPRESSA will

not prompt you to clean the fine foam frother.

You can choose to use a second coffee variety, for example decaf-

feinated coffee, with the filter funnel for ground coffee.

ENever add more than two level measuring spoons of ground

coffee.

EUse ground coffee which is not ground too finely. Very fine

coffee can block up the system so that the coffee only comes

out in drips.

EIf you did not fill the machine with a sufficient amount of

ground coffee, NOT ENOUGH PRE-GROUND is displayed

and the IMPRESSA stops the operation.

EThe desired speciality coffee must be prepared within approx-

imately one minute after filling with the ground coffee. Oth-

erwise the IMPRESSA stops the operation and is once more

ready for use.

All speciality coffees with ground coffee are prepared following this

model.

Example:Proceed as follows to prepare one espresso using ground

coffee.

Precondition:READY is displayed.

T Place an espresso cup under the coffee spout.

Ground coffee

2 Preparation

T Open the cover of the filler funnel for ground coffee.

FILL PRE-GROUND

T Place one level measuring spoon of ground coffee into the

filler funnel.

T Close the cover of the filler funnel.

SELECT BUTTON

 < T Press the Espresso button.

Preparation starts. 1 ESPRESSO, the preset amount of

water for espresso flows into the cup.

Preparation stops automatically. READY appears on the

display.

It is easy to make permanent settings for the amount of water for all

speciality coffees and hot water according to the cup size. Adjust the

amount once as shown in the following example. Every time you

prepare a drink in the future, this amount of water will be dispensed.

The permanent settings for adapting the amount of water to the cup

size for all speciality coffees and hot water follow this model.

Example: Proceed as follows to permanently set the amount of

water for one coffee.

Precondition:READY is displayed.

T Place a cup under the coffee spout.

 > T Press and hold the Coffee button.

1COFFEE

 > T Hold the Coffee button down until ENOUGH COFFEE?

appears.

 > T Release the Coffee button.

Preparation starts and the coffee flows into the cup.

T Press any button as soon as there is sufficient coffee in the

cup.

Preparation stops. OK appears briefly on the display. The set

amount of water for one coffee is permanently stored.

READY appears on the display.

EYou can alter this setting at any time by repeating the above

procedure.

Permanently setting the

amount of water for the

cup size

2 Preparation

EYou can also permanently set the amount of water for all spe-

ciality coffees and hot water in programming mode (see

Chapter 4 ‘Permanent settings in programming mode – Prod-

uct settings’).

To obtain a perfect water flow, use the hot-water nozzle. You can find

the hot-water nozzle under the cover of the storage compartment.

There is a danger of scalding from hot water splashes.

T Avoid direct contact with the skin.

Example:Proceed as follows to prepare hot water.

Precondition:READY is displayed.

T Carefully remove the fine foam frother from the Connector

T Open the storage compartment cover, take out the hot-

water nozzle and close the cover again.

T Attach the hot-water nozzle to the connector.

T Place a cup under the hot-water nozzle.

 § T Press the Hot Water button.

SWITCH OPEN

The arrow on the switch lights up.

 j T Turn the switch to them position.

WATER PORTION, the preset amount of water flows into

the cup. Preparation stops automatically.

SWITCH CLOSE

 h T Turn the switch to the °position.

The illuminated arrow on the switch goes out. READY

appears on the display.

EYou can also prepare any amount of hot water you require: To

do this, turn the switch to the m position. When there is

enough water in the cup, turn the switch back to the °posi-

tion.

Hot water

J CAUTION

Page is loading ...

Jura Impressa F7 Owner's manual

Brand: Jura

Model: Impressa F7

Category: Coffee makers

Type: Owner's manual

Download PDF

report

Jura Impressa F7 Owner's manual

Jura Impressa F7 Owner's manual

Related papers

Other documents