Trinamic TMCM-1231-TMCL is a single-axis controller/driver for 2-phase bipolar stepper motors. The module can be used either with TMCL firmware, supporting standalone operation as well as CANopen protocol. Both firmware versions make extensive use of the Trinamic TMC4361 motion controller and TMC5160 motor driver. Dynamic current control and quiet, smooth and efficient operation are combined with StealthChop, DcStep, StallGuard2 and CoolStep features. The TMCM-1231-TMCL provides trapezoid, SixPoint and S-shaped ramps and supports motor supply voltage of +10...48V DC, motor current up to 6.
Trinamic TMCM-1231-TMCL is a single-axis controller/driver for 2-phase bipolar stepper motors. The module can be used either with TMCL firmware, supporting standalone operation as well as CANopen protocol. Both firmware versions make extensive use of the Trinamic TMC4361 motion controller and TMC5160 motor driver. Dynamic current control and quiet, smooth and efficient operation are combined with StealthChop, DcStep, StallGuard2 and CoolStep features. The TMCM-1231-TMCL provides trapezoid, SixPoint and S-shaped ramps and supports motor supply voltage of +10...48V DC, motor current up to 6.
Trinamic TMCM-1231-TMCL is a single-axis controller/driver for 2-phase bipolar stepper motors. The module can be used either with TMCL firmware, supporting standalone operation as well as CANopen protocol. Both firmware versions make extensive use of the Trinamic TMC4361 motion controller and TMC5160 motor driver. Dynamic current control and quiet, smooth and efficient operation are combined with StealthChop, DcStep, StallGuard2 and CoolStep features. The TMCM-1231-TMCL provides trapezoid, SixPoint and S-shaped ramps and supports motor supply voltage of +10...48V DC, motor current up to 6.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI