Whirlpool aqxgf 149 h s n Owner's manual

GB

1

WASHING MACHINE

English,1

GB

AQUALTIS

AQXGF 149

Instruction booklet

Contents

Installation, 2-3

Unpacking and levelling

Connecting the cold water and electricity supplies

Technical data

Description of the machine, 4-5

Control panel

Running a wash cycle, 6

Programmes and options, 7

Table of Programmes

Wash options

Detergents and laundry, 8

Detergent

Preparing the laundry

Washing advice

Load-balancing system

Precautions and tips, 9

General safety

Disposal

Opening the door manually

Care and maintenance, 10

Turning off the water and electricity supplies

Cleaning the machine

Cleaning the detergent dispenser

Drum maintenance

Cleaning the pump

Checking the water inlet hose

Troubleshooting, 11

Assistance, 12

Espanol,25

ES

Português,37

PT

Français,13

F

Nederlands,49

NL

Deutsch,61

DE

GB

2

Installation

A

 Keep this instruction manual in a safe place for

future reference. If the appliance is sold, given away

or moved, please ensure the manual remains with the

machine so that the new owner may benefit from the

advice contained within it.

 Please read this instruction manual carefully it

contains important information regarding the safe

installation, use and maintenance of the appliance.

 You will find the guarantee and other details relating to

the installation process in the bag containing this booklet.

Unpacking and levelling

Unpacking

1. Once the washing machine has been removed

from the packaging, check that it has not been

damaged during transportation.

If it has been damaged, contact the retailer and do

not proceed any further with the installation process.

2. Remove the 4 transit

bolts used during

transportation and the

corresponding spacers

on the back of the

machine (see figure).

3. Having removed the 4 bolts use the 4 plastic

blanking plates to cover the 4 holes.

4. Keep all the pieces; if the washing machine is

transported in future, the transit bolts and spacers will

have to be replaced in order to avoid damaging the

inside of the machine.

 Packaging materials should not be used as toys by children.

Levelling

1. Position the washing machine on a level and sturdy

floor, without resting it against walls or cabinets.

2. If the floor is uneven,

the feet of the appliance

may be adjusted until it

reaches a perfectly

horizontal position (the

angle of inclination must

not exceed 2 degrees).

 If the appliance is levelled correctly it will be more

stable and much less likely to cause vibrations and

noise during the spin cycle.

 If positioned on a fitted carpet or a rug, adjust the

feet in such a way as to allow room for air to circulate

and provide ventilation beneath the washing machine.

Connecting the cold water and

electricity supplies

Connecting the water inlet hose

 Before connecting the inlet hose to the cold water supply,

allow the water to flow from the tap until it runs clear.

1. Connect the end of

the water inlet hose to

the washing machine,

screwing it onto the

appliance's cold water

inlet, situated on the top

right-hand side on the

rear of the appliance

(see figure).

2. Place the seal A

(provided in the bag) on

the end of the inlet hose

and screw it to a cold

water tap with a 3/4 gas

threaded connection (see

figure).

3. Make sure there are no kinks or bends in the inlet hose.

 The water pressure at the tap must fall within the values

indicated in the Technical data table (see next page).

 If the water inlet hose is not long enough, contact a

specialist store or an authorised technician.

 Always use the new water inlet hoses supplied with

the machine.

GB

3

Technical data

Model

AQXGF 149

Dimensions

width 59.5 cm

height 85 cm

depth 64.5 cm

Capacity

from 1 to 9 kg

Electrical

connections

please refer to the technical data

plate fixed to the machine

Water connections

maximum pressure 1 MPa (10 bar)

minimum pressure 0.05 MPa (0.5 bar)

drum capacity 62 litres

Spin speed

up to 1400 rotations per minute

Energy rated

programmes

according to

regulation

EN 60456

WHITE COTTON programme;

temperature 60°C;

using a load of 9 kg.

This appliance conforms to the

following EC Directives:

- 89/336/EEC dated 03/05/89

(Electromagnetic Compatibility) and

subsequent modifications

- 2002/96/CE

- 2006/95/CE (Low Voltage)

65 - 100 cm

Drainage Connection

Connect the outlet hose

to a draining duct or a

stand pipe at a height

between 65 and 100 cm

from the floor. Do not

bend it under any

circumstances.

Alternatively, place the

end of the hose over the

edge of a washbasin or

tub, fastening the hose

supplied to the tap (see

figure).

The free end of the hose

should not remain

immersed in water.

 We advise against the use of hose extensions; if

absolutely necessary, the length of the extension

must not exceed 150 cm and its diameter must be

the same as the original hose.

Electrical connection

Before inserting the plug into the electrical socket,

make sure that:

 the socket is earthed and complies with current

regulations;

 the socket can withstand the maximum load of the

appliance, which is indicated in the Technical data

table (see opposite);

 the power supply voltage falls within the values

indicated in the Technical data table (see opposite);

 the socket is compatible with the plug of the

appliance. If this is not the case, either the socket

or the plug must be replaced.

 The machine must not be installed outdoors, even in

covered areas. It is extremely dangerous to leave the

appliance exposed to rain, storms and other weather

conditions.

 Once the machine has been installed, the electricity

socket should be easily accessible.

 Do not use extension cables or multiple sockets.

 The cable should not be bent or compressed.

 The cable should be replaced only by authorised

technicians.

Warning! The company shall not be held responsible

for any incidents that occur if these regulations are

not observed.

GB

4

Description of the machine

DOOR

Always use the handle to

open the door (see

figure).

CONTROL

PANEL

DOOR

HANDLE

TOE-KICK

ADJUSTABLE FEET

20

1

2

DETERGENT DISPENSER:

This is inside the machine

and may be accessed by

opening the door.

For information relating to

detergents, please refer

to the chapter entitled

Detergents and laundry.

1. pre-wash

compartment: use

powder detergent.

2. main wash

compartment: use

powder or liquid

detergent. If you intend to

use liquid detergent, we

recommend that it is

poured into the

compartment immediately before the wash cycle is

started.

compartment for additives: for fabric softener or

other liquid washing additives. Do not exceed the

maximum level indicated by the grille, and dilute

concentrated fabric softeners.

GB

5

ON-OFF/CANCEL button with indicator light :

press the button briefly to switch the machine on or

off. The green indicator light shows that the machine

is switched on. To switch the washing machine off

during a wash cycle, press and hold the button for

approximately 2 seconds; pressing the button quickly

or accidentally will not switch the machine off.

If the machine is switched off during a wash cycle,

the programme will be cancelled.

PROGRAMME knob: this can be rotated in both

directions. To set a more suitable programme, please

refer to the Table of Programmes.

The knob is locked into position during the wash cycle.

TEMPERATURE

button: press this button to

adjust the temperature; the value will be identified by

the display above (see Running a wash cycle).

SPIN SPEED

button: press this button to adjust

the spin value or to exclude this part of the

programme; the value will be identified by the display

above (see Running a wash cycle).

DELAY TIMER

 button: press to set a delayed start

time for the selected programme; the delay time will

be identified by the display above (see Running a wash

cycle).

OPTION buttons and indicator lights: may be used to

select any of the available options. The indicator light

corresponding to the selected option will remain lit

(see Running a wash cycle).

WASH CYCLE PHASE icons: these light up to

provide an indication of the progress of the wash

cycle (Wash

- Rinse - Spin - Final draining

phase

).

The text

lights up when the cycle has finished.

START/PAUSE button with indicator light: when the

green indicator light flashes slowly, press the button to

start the wash cycle. When the cycle has started, the

indicator light is illuminated in a fixed manner. To

pause the wash cycle, press the button again; the

indicator light will turn orange and begin to flash

again. If the Door Locked

indicator light is off,

the porthole door may be opened.

To restart the wash cycle from the point at which it

was interrupted, press the button again.

DOOR LOCK

indicator light: this indicates that

the porthole door is locked. To open the door, pause

the wash cycle (see following page).

CHILD LOCK

button and indicator light: this is

used to enable or disable the Child lock function, by

pressing the button for approximately 2 seconds.

When the indicator light is illuminated, the control

panel is locked. This avoids accidental changes being

made to the wash cycles, especially where children

are at home.

ECO indicator light: the

icon lights up when the

electricity saving reaches at least 10% (this can be

achieved by adjusting the wash cycle settings).

TEMPERATURE

button

PROGRAMME

knob

OPTION

buttons and

indicator lights

DOOR

LOCK

indicator light

START/PAUSE

button with indicator light

WASH

CYCLE

PHASE

icons

SPIN SPEED

button

DELAY

TIMER

button

CHILD LOCK

button and indicator

light

ON-OFF/CANCEL

button with indicator light

ECO

indicator

light

Control panel

GB

6

Running a wash cycle

NOTE: the first time you use the washing machine,

add detergent and run an empty 90°C cotton wash

cycle without the pre-wash phase.

1. SWITCH ON THE MACHINE. Press the

button. All the indicator lights will illuminate for 1

second, after which the light corresponding to the

button will remain lit constantly, while the

START/PAUSE indicator light will flash slowly.

2. LOAD THE LAUNDRY. Open the porthole door.

Load the laundry, making sure that the maximum

load quantity indicated in the table of programmes

(below) is not exceeded.

3. MEASURE OUT THE DETERGENT. Pull out the

drawer and pour the detergent into the relevant

compartments as described in Description of the

machine.

4. CLOSE THE PORTHOLE DOOR.

5. CHOOSE THE PROGRAMME. Turn the

PROGRAMME knob left or right to select the

required programme, to which a set temperature

and spin speed are linked (these values may all be

modified).

6. PERSONALISE THE WASH CYCLE. Use the

relevant buttons on the control panel:

Modify the temperature and/or the

spin speed. The machine automatically selects

the temperature and the maximum spin speed for

the programme set and these values may not be

increased. By pressing the

button, the tempe-

rature can be progressively reduced or even set to

cold wash (

). By pressing the button, the

spin speed can be progressively reduced or even

eliminated altogether (

). If the buttons are

pressed again the maximum values are restored.

 Exception: if the WITHE COTTON programme is

selected, the temperature can be increased up to

a value of 90°C.

Setting a delayed start.

To set a delayed start for the selected programme,

press the button repeatedly until the desired delay

time is displayed (this may be between 1 hour and

24 hours).

To disable the function press the button until the

text

is displayed.

N.B.: Once the button START/PAUSE has been

pressed, the delay time may only be decreased.

Modify the cycle caracteristics.

Press the OPTION buttons to personalise the wash

cycle according to your own requirements.

 Press the button to activate the option; the

corresponding indicator light will illuminate.

 Press the button again to deactivate the option;

the indicator light will switch off.

 If the selected option is not compatible with the

set programme, the indicator light will flash and the

option will not be activated.

 If the selected option is not compatible with

another previously selected option, the indicator

light corresponding to the first option will flash and

only the second option will be activated (the

corresponding indicator light will remain lit in a fixed

manner).

7. START THE PROGRAMME. Press the START/

PAUSE button. The corresponding indicator light

remains lit in a fixed manner and the porthole door

locks (the DOOR LOCK indicator light illuminates).

The icons corresponding to the different wash

phases will light up during the cycle, indicating the

progress. To change a programme while a cycle is

in progress, pause the washing machine by

pressing the START/PAUSE button; then select the

desired cycle and press the START/PAUSE button

again.

To open the door while a cycle is in progress press

the START/PAUSE button; if the DOOR LOCK

indicator light switches off it is possible to open the

door. Press the START/PAUSE button again to

restart the programme from the point at which it

was interrupted.

8. PROGRAMME END. The text END lights up to

indicate that the programme has ended. The

porthole door may be opened immediately. If the

START/PAUSE button flashes, press the button to

end the cycle. open the door, unload the laundry

and switch off the machine.

 If you wish to cancel a cycle that has already

begun, press and hold the button. The cycle will be

stopped and the machine will switch off.

BAG FOR QUILTS, CURTAINS AND DELICATE

GARMENTS

Hotpoint/Ariston has made it easier for you to wash

even the most valuable and delicate garments in

complete confidence thanks to the special bag which

protects the laundry (this is supplied with the

machine).

We recommend that the bag is used every time you

wash quilts and padded items with an outer layer

made using synthetic material.

GB

7

Programmes and options

Icon Programme description

Max.

tempera-

ture (°C)

Max.

spin

speed

(r.p.m.)

Detergent

Maximum load

(kg)

Cycle

duration

Washing

Fabric

softener

Normal

Using

Mini

load

Everyday programmes

WHITE COTTON

60°

(Max 90°)

1400

ll

94

WHITE COTTON:

Heavily soiled whites and delicate

colours

.

40° 1400

ll

94

COLOURED COTTON

40° 1400

ll

94

DELICATE SYNTHETICS

40° 800

ll

42

MIX 30': Refreshes lightly soiled garments quickly (not

recommended for wool, silk or clothes that should be

washed by hand).

30° 800

ll

3.5 1.5

Vigorous programmes

PRE-WASH: Removes stubborn stains.

(Add detergent to the relevant compartment).

90° 1400

ll

94

DURABLE SYNTHETICS

60° 800

ll

42

Special programmes

SHIRTS

40° 600

ll

21

SILK: Washes silk and garments and lingerie.

30° 0

ll

21

WOOL: Washes wool, cashmere, etc.

40° 600

ll

21

DUVETS: Washes garments filled with goose down.

30° 1200

ll

31, 5

WEEKLY WASH: Washes bathroom laundry and bedlinen.

60° 1400

ll

94

Partial programmes

Durable rinse - 1400 -

l

94

Delicate rinse - 800 -

l

42

Durable spin - 1400 - - 94

Delicate spin - 800 - - 42

Drain - 0 - - 94

Table of Programmes

Wash options

Super Wash

This option guarantees a high-performance wash,

thanks to the use of a greater quantity of water

during the initial phase of the cycle and a longer

overall duration of the programme.

 It is not compatible with the MIX 30, Silk,

Wool, Duvets and Partial programmes.

Easy Iron

If this option is selected, the wash and spin phases

will be adjusted accordingly so that fabric creasing is

reduced. At the end of the cycle the drum of the

washing machine will spin slowly; the Easy Iron and

START/PAUSE indicator lights will flash. To end the

cycle, press the START/PAUSE button or the Easy

Iron button.

When using the Silk programme, the machine will

end the cycle while the laundry is soaking and the

Easy Iron indicator light will flash. To drain the water

so that the laundry can be removed, press the

START/PAUSE button or the Easy Iron button.

 This option is not compatible with the Wool, Durable

Spin, Delicate Spin and Draining programmes.

Extra Rinse

This programme increases the efficiency of the rinse

phase and ensures that a greater amount of detergent

is removed. It is particularly recommended for skin types

that are sensitive to detergents. We recommend this

programme is used when the washing machine is full or

when a large amount of detergent has been used.

 This option is not compatible with the MIX 30,

Durable Spin, Delicate Spin and Draining

programmes.

Mini load

This function should be used when the amount of

laundry is half, or less than half, of the maximum

recommended load (see Table of Programmes).

 This option is not compatible with the Durable

Spin, Delicate Spin and Draining programmes.

The information contained in the table is purely indicative.

The wash cycle duration can be viewed on the display.

GB

8

Detergents and laundry

Detergent

The type and quantity of detergent used depends on

the type of fabric (cotton, wool, silk...), its colour, the

temperature of the wash, the level of soiling and the

hardness of the water in the area.

Measuring out the detergent carefully will avoid

accidental spills and help to protect the environment:

although they may be biodegradable, detergents

contain elements that alter the balance of nature.

We recommend:

 the use of powder detergents for white cotton

garments and for pre-wash phases;

 the use of liquid detergents for delicate cotton

garments and for all programmes which run at a

low temperature;

 the use of liquid detergents for wool and silk.

 Do not use detergents when washing garments by

hand, because they create too much foam.

The detergent must be measured out into the relevant

compartment, or into the detergent dosing ball which will be

placed directly into the drum of the machine. In this case

the Cotton cycle with pre-wash phase may not be selected.

Preparing the laundry

 Unfold all items of laundry before placing them in the

machine.

 Divide the laundry according to type of material (the

symbol on the garment label) and colour, making sure

that whites are separated from coloured garments.

 Empty all pockets and check for loose buttons.

 Do not exceed the values indicated in the Table of

Programmes, which refer to the weight of the

laundry items when they are dry.

How much does your laundry weigh?

1 sheet 400 - 500 g

1 pillowcase 150 - 200 g

1 tablecloth 400 - 500 g

1 bathrobe 900 - 1200 g

1 towel 150 - 250 g

1 pair of jeans 400 - 500 g

1 shirt 150 - 200 g

Washing advice

Shirts: use a suitable programme to wash shirts made

from different fabrics and in different colours. This will

guarantee that these garments are looked after properly.

Silk: use the relevant programme designed for all silk

garments. We recommend the use of a special

detergent for delicate garments.

Curtains: these should be folded and placed inside

the bag provided. Use the "Silk" programme.

Wool: Hotpoint/Ariston is the only washing machine to

have obtained the prestigious Woolmark Platinum Care

mark of recognition (M.0508) from The Woolmark

Company, which certifies the machine washing of all

woollen garments, even those whose label states hand

wash only

. The Wool programme therefore offers

you complete peace of mind when washing all woollen

garments, with great performance guaranteed every time.

Duvets: to wash double or single duvets (the weight of

which should not exceed 3 kg), cushions or clothes

padded with goose down such as puffa jackets, use the

special "Duvets" programme. We recommend that

duvets are placed in the drum with their edges folded

inwards (see figure) and that no more than ¾ of the

total volume of the drum is used.

To achieve the best results, we recommend that a

liquid detergent is used in conjunction with the

detergent dispenser drawer.

Quilts: to wash quilts with a synthetic outer layer,

use the bag provided and set the programme to

"Duvets".

Bathroom laundry and bedlinen: this washing

machine can be used to wash any domestic laundry

in a single cycle called Bed & Bath that optimises

the use of fabric softener while saving both time and

electricity. We recommend that you use a powder

detergent.

Stubborn stains: stubborn stains should be treated

with solid soap before the garment is washed (use the

Cotton programme with pre-wash phase).

Load-balancing system

Before every spin cycle, to avoid excessive vibrations

and to distribute the load in a uniform manner, the

drum rotates continuously at a speed which is slightly

faster than the normal washing speed. If, after several

attempts, the load is still not evenly distributed, the

machine spins at a lower speed than the set

frequency. If the load is excessively unbalanced, the

washing machine continues at distribution speed only

instead of the full spin speed.In order to achieve

better load distribution and balance, we recommend

that large and small garments are mixed when placing

the laundry in the machine.

GB

9

Precautions and tips

20

 This machine was designed and manufactured in

compliance with cuurent international safety

standards. The following advice is provided for safety

reasons and should be read carefully.

General safety

 This appliance was designed for domestic use

inside the home and is not intended for commercial

or industrial use.

 The washing machine must be used by adults only,

in accordance with the instructions provided in this

booklet.

 Do not touch the machine when barefoot or with

wet or damp hands or feet.

 When unplugging the appliance, always pull the

plug from the mains socket; do not pull on the

cable.

 Do not touch the drained water as it may reach

extremely high temperatures.

 Never force the porthole door: doing so may

damage the safety lock mechanism designed to

prevent the door being opened accidentally.

 If the appliance breaks down, under no

circumatances must you attempt to carry out the

repairs yourself.

 Keep children well away from the machine while it

is in operation.

 If the machine must be moved, work in a group of

two or three people and handle it very carefully.

Never attempt to move the appliance without the

help of another person, because it is extremely

heavy.

 Make sure that the drum is empty before loading

laundry into the appliance.

Disposal

 When disposing of the packaging material: observe

local legislation so that the packaging may be reused.

 The European Directive 2002/96/EC relating to

Waste Electrical and Electronic Equipment states

that household appliances should not be disposed

of using the normal solid urban waste cycle.

Exhausted appliances should be collected

separately in order to optimise the cost of re-using

and recycling the materials inside the machine,

while preventing potential damage to the

atmosphere and to public health. The crossed-out

dustbin is marked on all products to remind the

owner of their obligations regarding separated

waste collection.

For more information relating to the correct

disposal of household appliances, owners should

contact their local authorities or appliance dealer.

Opening the door manually

If it is not possible to open the porthole door due to a

powercut and you wish to hang out the laundry,

proceed as follows:

1. Remove the plug from

the electricity socket;

2. Make sure that the

water level inside the

machine is lower than the

door opening; if this is not

the case remove excess

water using the water

outlet hose, collecting it in

a bucket as shown in the

figure;

3. Remove the covering

panel on the front of the

washing machine using a

screwdriver (see figure);

4. Using the tab shown in

the figure, pull outwards

until the plastic brace

comes away; pull it

downwards until you hear

a click, which indicates

that the door is unlocked;

5. Open the door; if this is

still not possible, repeat

the process;

6. Replace the kick strip, making sure that the hooks

are positioned in the right slots before pushing the

panel towards the machine.

GB

10

Care and maintenance

1

2

Turning off the water and electricity

supplies

 Turn off the water tap after every wash. This limits

wear and tear on the machines water supply and

prevents leaks.

 Disconnect the appliance from the electricity supply

before cleaning it and before performing any

maintenance work on it.

Cleaning the machine

The exterior of the appliance and all rubber parts may

be cleaned using a cloth soaked in warm soapy

water. Do not use solvents or abrasive products.

Cleaning the detergent dispenser

drawer

To remove the drawer,

press the lever (1) and pull

it outwards (2) (see

figure).

Wash the drawer under

running water; this should

be done regularly.

Drum maintenance

 Always leave the porthole door ajar to prevent

unpleasant odours from forming.

Cleaning the pump

The washing machine is fitted with a self-cleaning

pump which does not require regular maintenance.

However, it may be that small objects (coins, buttons,

etc.) fall into the pre-chamber that protects the pump

(the pump is located in the lower part of this pre-

chamber).

 Make sure that the wash cycle has finished and

remove the plug from the socket.

To access the pre-chamber:

1. Remove the kick strip

on the front of the

machine using a

screwdriver (see figure);

2. Position a container

collecting the drained

water (approximately 1.5 l)

correctly (see figure);

3. Unscrew the cover,

turning it in an

anticlockwise direction

(see figure);

4. Clean the inside thoroughly;

5. Screw the cover back on;

6. Replace the kick strip, making sure that the hooks

are positioned in the right slots before pushing the

panel towards the machine.

Checking the water inlet hose

Check the water inlet hose at least once a year. If

there are any cracks, replace it immediately: the high

water pressure used by the wash cycles could cause

a cracked hose to split open.

GB

11

Troubleshooting

Possible causes / Solutions:

 The plug has not been inserted into the electrical socket, or it has not

been inserted far enough to make contact.

 There is no power in the house.

 The porthole door has not been shut properly.

 The START/PAUSE button has not been pressed.

 The water tap has not been turned on.

 The water inlet hose is not connected to the tap.

 The hose is kinked.

 The water tap has not been turned on.

 There is no water in the house.

 The water pressure is insufficient.

 The START/PAUSE button has not been pressed.

 The end of the outlet hose has not been fitted at a height between 65

and 100 cm from the floor (see Installation).

 The free end of the hose is underwater (see Installation).

 If If the dwelling is on one of the upper floors of a building, there may be

problems relating to water drainage, causing the washing machine to

load and drain water continuously. Special anti-draining valves are

available in shops and help to avoid this inconvenience.

 The water drainage systemis not fitted with a breather pipe.

 The programme does not include a draining phase: some programmes

require manual draining (see Programmes and options).

 The Easy Iron option is enabled: to complete the programme, press the

START/PAUSE button (see Programmes and options).

 The outlet hose is bent (see Installation).

 The drainage duct is clogged.

 The drum was not unlocked properly when the appliance was installed

(see Installation).

 The washing machine is not level (see Installation).

 The washing machine is trapped between cabinets and a wall (see Installation).

 The load is not balanced properly (see Description of the machine).

 The water inlet hose is not screwed on to the tap correctly (see Installation).

 The detergent dispenser drawer is blocked (for instructions on how to

clean it, see Care and maintenance).

 The outlet hose has not been secured properly (see Installation).

 Switch off the machine and unplug the appliance; wait for approximately

1 minute then switch it on again.

If the problem persists, contact Assistance.

 The detergent is not designed for machine washing (the packaging

should state that the product is for washing by machine, for washing

by hand or machine or similar).

 Too much detergent was used.

 Follow the manual unlocking procedure (see Precautions and tips).

 If the problem persists after the above checks have been carried out, shut

off the water tap, switch off the machine and contact Assistance.

From time to time your machine may not operate as it should. Before calling for Assistance (see Assistance),

make sure that the problem cannot be resolved easily using the following list.

Malfunction:

The washing machine

will not switch on.

The wash cycle

does not begin.

The washing machines fails to

fill with water.

The machine continuously fills

and drains water.

The machine does not drain

or spin.

The washing machine vibrates

too much during the spin cycle.

The washing machine leaks.

The icons corresponding to the

Phase in progress flash

rapidly at the same time as the

ON/OFF indicator light.

There is too much foam.

The washing machine door

remains locked.

GB

12

Assistance

Before contacting Assistance:

 Check whether you can resolve the problem on your own (see Troubleshooting);

 Restart the programme to check whether the problem has been overcome;

 If this is not the case, contact the Authorised Technical Assistance Centre;

 If the machine has been installed or used incorrectly, you may be charged for the maintenance callout service.

 Never use the services of an unauthorised technician.

Have the following information ready:

 The type of problem experienced;

 The appliance model (Mod.);

 The serial number (S/N);

This information can be found on the appliance data plate.

Page is loading ...

Whirlpool aqxgf 149 h s n, AQXGF 149, AQXGF 149 (EU) (O) Owner's manual

Related papers

Other documents