Brandt CL-700_EL Owner's manual

Brand: Brandt

Model: CL-700_EL

Category: Washing machines

Type: Owner's manual

This manual is also suitable for

FE-2013

Livret d’instructions, d’utilisation et de maintenance

Manual of instructions for use and maintenance

Anweisungshandbuch für gebrauch und wartung

Handleiding voor het gebruik en onderhoud

Manual de instruções de utilização e manutenção

LJ6A017K8.01 21/9/01 20:26 Página 1

Contents

1.- Prior warnings .................................................................................................................... 21

- Familiarize yourself with your washing machine

- Installation

- Technical nameplate data

2.- Description of the washing machine ............................................................................... 21

- Control panel

3.- Use of controls and selection keys................................................................................... 22

- Power supply key of the washing machine

- Programme selector control

- Additional function keys

Prewash key

Extra rinse key

Spin/creaseguard selection key

- Start/stop key

4.- Putting clothes into the drum............................................................................................ 23

- Opening of loading door

- Loading clothes into the drum

5.- Adding detergents and additives..................................................................................... 24

- Optional dispenser

6.- Detergent ............................................................................................................................ 24

- Dosage of detergent

7.- Operating a washing programme.................................................................................... 25

- Selection of washing programme

- Starting

- End of programme

- Pause

- Cancelling the programme in operation

- Protection against power cuts

8.- Washing programmes ....................................................................................................... 26

- List of washing programmes

9.- Prior cleaning ..................................................................................................................... 30

ENGLISH

LJ6A017K8.01 21/9/01 20:27 Página 19

10.- Cleaning and special care............................................................................................... 30

11.- Practical advice for optimizing washing........................................................................ 30

- Classification of clothes

- Colour

- Dirtiness

- Sensitivity

- Conservation symbols

- Drawings of conservation symbols

12.- Treatment of stains............................................................................................................ 31

- Stains that are soluble in water

- Stains that are insoluble in water

- Special stains

13.- Practical advice for loading clothes into the drum....................................................... 32

14.- General advice for washing ............................................................................................ 32

15.- General advice.................................................................................................................. 32

- Maintenance

- Cleaning

- External cleaning

- Cleaning the soap dispenser

16.- Troubleshooting ................................................................................................................ 33

- The washing machine fails to start

- The washing machine vibrates or makes excessive noise

17.- Detection or indication of faults and breakdowns ........................................................ 33

- Indication of faults

- Action to be taken

ENGLISH

LJ6A017K8.01 21/9/01 20:27 Página 20

1.- Prior warnings

Familiarize yourself with your washing

machine

Before anything else, you must familiarize

yourself with and get to know your washing

machine perfectly. With the aim of helping

you to recognize the different devices and

elements with which the machine is equip-

ped, we have incorporated some diagrams

in this MANUAL which are to be found at

the end of this instruction book on the back

page. We strongly recommend that you

study them. In them appears a series of

illustrations that will doubtless help you to

understand the text and locate all the ele-

ments comprising the appliance.

Installation

Installation of the WASHING MACHINE

must be carried out in accordance with the

regulations in force. Specific installation

instructions are given in the INSTALLA-

TION MANUAL.

IMPORTANT: Before starting the washing

machine, remember that it is absolutely

essential to remove the INSIDE BINDING

SCREWS that are required for transport.

Please consult the Instruction Manual.

Technical nameplate data

The technical nameplate data are to be

found attached to the front part of the WAS-

HING MACHINE. Here are shown the tech-

nical and identification data of this applian-

ce. THIS NAMEPLATE MUST BE CONSUL-

TED PRIOR TO PROCEEDING WITH THE

RELEVANT ELECTRICAL CONNECTIONS.

The washing machine is environmentally

friendly in so far as it comes equipped with

a system that is able to be adapted to diffe-

rent conditions of use (loading of clothes

and type of fabric) by guaranteeing an

optimum water and energy level and main-

taining the same results in washing and

rinse. This means that the amount of water

that may be observed through the hatch

during the washing process is low.

Moreover and with the same aim in mind,

your washing machine comes equipped

with a patented system whereby only in

washing programmes for normal fabrics

(cotton, linen, etc.) does the drum spin fas-

ter than usual for the briefest of time (2

seconds). This occurs between three and

ten times during the entire washing pro-

cess, depending on the temperature selec-

ted.

2.- Description of the

washing machine

(Fig.1)

1.- Work top

2.- Loading door

3.- Opening handle. Loading door.

4.- Base

Control panel (Fig.2)

1.- Power supply key of the washing

machine

2.- Start/stop key

3.- Prewash option key

4.- Extra rinse option key

5.- Spin/creaseguard selection option key

6.- Programme selector control

7.- Door locked light-up switch

8.- Start/stop key light-up switch

9.- Prewash key light-up switch

10.- Extra rinse key light-up switch

11.- WASHING stage light-up switch

12.- RINSE AND SPIN stage light-up switch

13.- END of programme light-up switch

14.- Creaseguard option light-up switch

15.- Draining speed light-up switches

16.- Soap dispenser

ENGLISH

LJ6A017K8.01 21/9/01 20:27 Página 21

3.- Use of controls and

selection keys

Power supply key of the washing

machine

If the key is pushed out, the washing machi-

ne is switched on. The maximum permitted

spin speed for the washing programme

selected will be lit up, as will the start/stop

key (this light-up switch may be flashing or

permanently on).

If the key is pushed in, the washing machi-

ne is switched off and no light will come on.

You may cut off the power supply to your

washing machine using this key (key pus-

hed in) while a programme is in operation

or when it has finished.

When you press the key again to reconnect

the washing machine to the power supply

(key pushed out), the washing machine will

continue what it was doing. If it was running

a programme, it will continue doing so until

its END, with the start/stop key lit up. The

washing phase in operation key and that of

the options selected will also be lit up. If, on

the other hand, the washing machine has

reached the END of the programme, it will

remain stopped with the start/stop light

flashing.

WARNING: if you cut off the power supply

of your washing machine while a washing

programme is in operation, the loading

door may be opened once the safety devi-

ce has been released (approximately 2

minutes). If you should open the door

under these conditions, please ensure

that the water level does not overflow out

of the door and that the temperature insi-

de is not too high. If you wish to stop the

programme for any reason, use the

start/stop key instead of this key, since the

washing machine will check on your behalf

that there have been no problems with

overflowing.

If the programme runs without interruption,

the loading door will be able to be opened

once the programme has finished and the

necessary time has elapsed for the door

locking safety device incorporated in the

washing machine to be released (approxi-

mately 2 minutes). This will be displayed

by means of the door locked pilot light

being switched off.

As a general rule, when a washing pro-

gramme finishes and the loading door of

the washing machine has been released,

the washing machine’s power supply

should be switched off by pressing this key

(key pushed in).

Programme selector control

With this control, you may select the was-

hing programme you desire. To do so, turn

it any direction until the index coincides

with the programme desired.

If you wish to cancel a washing programme

that has already started without it having

finished, select the EMPTYING/END pro-

gramme. This programme carries out an

emptying process and leaves the program-

me in its END position. When the light-up

switch of these washing stages indicates

END, the programme will have been can-

celled, it then being possible to select the

new programme.

Additional function keys

These keys provide you with the possibility

of incorporating previously selected was-

hing into the programme (if the latter

should enable it to do so); a series of addi-

tional functions and features that will enable

you to adjust the washing of your clothes

according to your wishes and require-

ments.

Your washing machine features the func-

tions described below:

Prewash key

When this option is selected, the pilot light

will light up and the clothes will be soaked

prior to starting the washing cycle. Energy

and water consumption increase accor-

dingly.

The water temperature during soaking will

be that of the programme selected, except

where the latter is 60 or 90º C, in which

case the soaking temperature will be limi-

ted to 40º C.

ENGLISH

LJ6A017K8.01 21/9/01 20:27 Página 22

Any temperature may be selected within

the normal and delicate programmes.

Extra rinse key

When selecting this option you increase the

level of final rinse obtained in the clothes.

Water consumption also increases.

When selecting it, the switch lights up. To

switch it off, press the key again.

It may be selected in all programmes

except in the spin and emptying/end ones.

Spin/creaseguard selection key

Pressing this key enables you to reduce

spin speed, eliminate the spin or select the

creaseguard option, with the relevant pilot

light coming on.

— Reduction in spin speed: this reduction

is especially indicated when very worn

clothes are used or with specific rinses.

The option of reducing spin speed may

be selected in all programmes except

in the emptying/end programme.

— Elimination of spin: the spin stage is eli-

minated in any programme that has

been selected. In this way, the formation

of creases is avoided when washing

special fabrics.

The option of eliminating spin may be

selected in all programmes except in

the spin programme.

— Creaseguard: the programme will be

interrupted in the last rinse, with the

clothes remaining floating in water insi-

de the drum and preventing the forma-

tion of creases. The creaseguard light-

up switch will start flashing. In this situa-

tion, press the key again and select the

final spin speed desired or eliminate

the spin so that washing may be com-

pleted.

The creaseguard option may be selec-

ted in all programmes except the empt-

ying/end and spin ones.

Start/stop key

The washing programme selected is star-

ted and paused using this key.

This key has a light-up switch that indicates

whether the washing machine is on (per-

manently lit-up switch) or has paused

(light-up switch flashing).

If while a washing programme is running

you wish to temporarily stop the washing

machine so as to load more clothes, or for

any other reason, do so with this key.

NOTE: If there is a lot of water in your was-

hing machine or emptying is in operation,

the machine may not be paused, and the

light-up switch of this key will remain per-

manently on.

4.- Putting clothes into the

drum

Opening of loading door

To open the loading door of the drum, pull

the hand outwards (Fig. 1-3)

Loading clothes into the drum

When putting clothes into the drum, we

recommend that you do the following:

— Ensure that all pockets are empty.

— Stretch and unfold the garments.

— Insert the garments into the drum one

by one, avoiding their getting tangled

up. Ensure that you put the smallest gar-

ments at the bottom of the drum.

— Do not apply pressure on them.

— Take the weight of the load recommen-

ded in the different programmes into

account.

— When washing bathing costumes, try

not to wash towels on their own. Mix

them with other garments.

Once the clothes have been put inside the

drum, close the loading door by applying

pressure on it until you are sure that no gar-

ment has got caught between the loading

door and the rubber joint.

ENGLISH

LJ6A017K8.01 21/9/01 20:27 Página 23

5.- Adding detergents and

additives

Add the detergent or additive to the soap

dispenser before starting the washing pro-

gramme (Fig.3)

The soap dispenser in your washing

machine has three compartments marked

with the following symbols:

Compartment: Detergent for PRE-

WASH is poured into this.

Compartment: Detergent for WAS-

HING is poured into this.

Compartment: Liquid additives such

as finishing agents, washing-blue and

fabric softeners, etc are poured into this if

required.

Note: The level of liquid must in no case

exceed the MAX SIGN (Fig.3).

Optional dispenser

In this washing machine you may also use

liquid detergents by making use of an

optional dispenser that may be acquired

through the AFTER-SALES SERVICE NET-

WORK. This optional dispenser must be

placed in the COMPARTMENT of the

soap dispenser (Fig. 3-A). As regards the

dosage, always follow the instructions

given by the manufacturers. In any case, the

detergent level must never exceed the

MAX sign engraved on the wall of the dis-

penser.

6.- Detergent

Only use detergents that are suitable for

washing clothes in automatic washing

machines, good quality detergents that do

not produce foam. For washing woollen

garments, only use neutral detergents.

Dosage of detergent

Remember that the dosage of detergent to

be used will always depend on:

— The amount of clothes to be washed.

— The type of clothes to be washed.

— How dirty the clothes are.

— The hardness of the water.

Using a larger amount than necessary does

not help to improve washing results and, as

well as being an additional cost, is not envi-

ronmentally friendly.

In washing programmes without prewash,

we recommend using those detergents that

may be inserted directly inside the drum.

We recommend , in any event, that you

heed the manufacturer’s instructions of the

detergent used.

The table shown below may serve as a gui-

deline when measuring the amount of

detergent according to the hardness of the

water and the amount of clothes to be was-

hed:

ENGLISH

LJ6A017K8.01 21/9/01 20:27 Página 24

7.- Operating a washing

programme

Selection of washing programme

Programme

After pressing the power supply key (1) of

your washing machine, the light-up switch

of the start/stop key (2) will start flashing.

When this happens, select the programme

required using the selector control (6).

NOTE: If the light-up switch goes perma-

nently on when the key (1) is pressed, this

means that there has been a programme

running and that it will continue running

until the END.

Draining/creaseguard speed

You may if you wish proceed to modify the

spin speed using the key (5), by varying

the speed from zero (eliminate spin) to

maximum speed (light-up switches (15)).

The CREASEGUARD option may also be

selected using said key (light-up switch

(14)).

If you select the creaseguard option, the

washing machine will stop with water in the

last rinse, and with the creaseguard light-

up switch (14) flashing. This reduces the

formation of creases.

To continue running the programme, press

this speed key (5), selecting the final drai-

ning speed required.

Note: draining speeds and the elimination

of spin and creaseguard may be selected

or not according to the programme chosen

(see table of programmes or the section

referring to “Special function keys” of this

manual).

Options

The options that may be selected are PRE-

WASH and EXTRA RINSE using the keys (3)

and (4).When one of these options is selec-

ted, the relevant switch (9) and (10) res-

pectively will light up.

Note: the options may be selected or not

according to the programme chosen (see

table of programmes or the section refe-

rring to “Special function keys” of this

manual).

Starting

For the washing programme chosen toget-

her with the options and draining speed

selected (consult the previous Selection

ENGLISH

Hardness of water (French degrees) Load of clothes in kg.

Soft (up to 12) 90 80 65 55

Average (12/25) 125 115 90 75

Hard (25/37) 160 140 110 90

Very hard (more than 37) 180 160 130 110

Information regarding the level of hardness of the water may be requested from the relevant local entities. If you

have information in German degrees, the equivalent may be obtained by multiplying them by 1.78.

DOSAGE OF DETERGENT IN GRAMMES

4,5/5 3,5 2,5 1 kg.

LJ6A017K8.01 21/9/01 20:27 Página 25

section) to start, press the start/stop key

(2). The light- up switch (8) of this key will

stop flashing and go permanently on.

The programme will have started the

moment that the door locked light-up

switch (7) and the switch corresponding to

the washing stages in operation (11), (12)

and (13) (washing, rinse or end respecti-

vely) light up.

SUMMARY OF STARTING

1. Press the power supply key (1) of

your washing machine.

2. Select the washing programme

using the selector control (6).

3. If required, select the spin crease-

guard speed using the switch (5)

and the prewash and/or extra rinse

options using the switches (3) and

(4) respectively.

4. Press the start/stop key (2). Its light-

up switch (8) must remain perma-

nently on, with the programme star-

ting when the door locked switch (7)

lights up.

End of programme

We will know when the washing program-

me chosen has ended the moment that the

switch corresponding to the washing sta-

ges lights up “end” (13).

However, as a safety measure, only once

the door locked light-up switch (7) has

been switched off may the loading door of

the washing machine be opened.

Pause

Your washing machine is on pause if the

light-up switch (8) is flashing.

If while running a programme you wish to

momentarily stop it in order to insert more

clothes, etc., the start/stop key (2) must be

pressed. When doing so, the light-up

switch (8) of this key will remain flashing

and the washing programme that was run-

ning will stop.

The loading door of the washing machine

may be opened when the locked door

light-up switch (7) switches off.

To continue, close the loading door and

press the start/stop key (2) so that its light-

up switch (8) remains permanently on.

Once a few seconds have elapsed, the lit

up locked door switch (7) will confirm that

that the washing programme is continuing.

When a washing programme is running,

the washing machine will pause if there is a

change of programme. To continue, press

the start/stop key (2).

Note: If there is a lot of water in your was-

hing machine or it is being emptied, no

pause may be made.

Cancelling the programme in operation

If while a programme is running you wish

to change to another without the former

ending or you simply wish to cancel it,

select the emptying/end programme. The

machine will be emptied and the program-

me will be cancelled the moment that

“end” (13) lights up on the switch corres-

ponding to washing stages.

You may then select a new washing pro-

gramme again, if you wish.

Protection against power cuts

When the washing machine loses its power

supply (when the power supply of your

washing machine is cut off using the key

(1), or due to a power cut resulting from a

storm or building work, etc.), the control

system of the appliance enables the

options selected prior to the interruption of

the wash to be conserved for some hours,

in such a way that the programme resumes

at the point where it left off once the power

supply has been restored.

8.- Washing programmes

You are in possession of a MULTIPRO-

GRAMME WASHING MACHINE that ena-

bles you to wash all types of clothes. It has

4 types of PROGRAMMES for such purpo-

se:

1. NORMAL PROGRAMMES

2. PROGRAMMES FOR DELICATE GAR-

MENTS

ENGLISH

LJ6A017K8.01 21/9/01 20:27 Página 26

3. PROGRAMMES FOR WOOLLENS

4. SPECIAL PROGRAMMES

The washing systems incorporated in your

washing machine are suitable for washing

both cotton garments and synthetic and

mixed garments, as well as woollen, silk

and acrylic ones.

Basically, the PROGRAMMES may be dis-

tinguished from each other by the rotatio-

nal speed of the drum, as well as the tem-

perature, washing time and water level.

The NORMAL programmes are suitable for

washing resistant fabrics such as cotton,

resistant synthetics and linen, etc.

The programmes for DELICATE garments,

with a lighter movement of the drum and

lower temperature, are geared towards

washing synthetic fabrics, mixed cotton

and delicate garments, etc.

The programmes for WOOLLEN garments

are those indicated for this type of fabric.

Special programmes range from fast was-

hes to rinse and spin programmes, etc.

Your washing machine includes a Variable

Load Automatic adjustment device that

enables the consumption of water and

energy to be adjusted automatically accor-

ding to the amount of clothes to be washed.

List of washing programmes

We provide you below with a detailed

TABLE OF PROGRAMMES. In it may be

found all the details relating to the different

types of washing programmes offered by

your washing machine. We suggest that

you consult it in order to obtain maximum

benefit form your washing machine.

An abbreviated version of the table can be

found on the front or top panel of the deter-

gent dispenser, or on a card included in

the documentation bag.

Consumption details may differ from those

levels shown according to the pressure,

hardness and inlet temperature of the

water, of atmospheric temperature, the

type and amount of clothes, fluctuations in

voltage and the option keys selected.

ENGLISH

LJ6A017K8.01 21/9/01 20:27 Página 27

Programme

Suggested

temperature

Type of fabric

Possible option

keys

Max. Load of

clothes (kg.)

Normal 90ºC

Cotton/linen

White

Averagely dirty

Prewash

Extra rinse

Spin selection

Eliminate spin

Creasguard

4.5/5 *

2.5

1.0

2.5

4.5/5 *

2.5

4.5/5 *

Extra rinse

Spin selection

Eliminate spin

Creaseguard

Spin selection

—

Normal 60ºC

Cotton/linen

Solid colours

Averagely dirty

Normal 40ºC

Cotton/linen

Solid colours

Slightly dirty

Normal 30ºC

Cotton/linen

Delicate colours

Slightly dirty

Normal cold cold

cold

Cotton/linen

Delicate colours

Very slightly dirty

Delicate 60ºC

WOOL 35

Synthetics/cotton mixture

White/solid colours

Averagely dirty

Delicate 40ºC

WOOL cold

Synthetics/cotton mixture

Delicate colours

Averagely dirty

Delicate 30ºC

Synthetics/cotton mixture

Delicate colours

Slightly dirty

Delicate cold

Synthetics/cotton mixture

White/colour

Very slightly dirty

Wool 35ºC

Wool/wool mixture

White/colour

Slightly dirty

Wool cold

Wool/wool mixture

White/colour

Very slightly dirty

Fast

30ºC

Cotton/linen

White/colour

Very slightly dirty

Rinses

—

Cotton/cotton mixture

Synthetics/Delicate

Fabric softener

Cotton/cotton mixture

Synthetics/delicate

Wool/wool mixture

Spin

Cotton/cotton mixture

Synthetics/delicate

Wool/wool mixture

Emptying/End

* 5kg in washing machines with speed machines with speed lower than 1200 rpm

. ( )

If prewash is selected.

Cotton/cotton mixture

Synthetics/Delicate

Wool/wool mixture

LJ6A017K8.01 21/9/01 20:27 Página 28

For washing

equal to or above 1200 rpm. For washing machines with speed equal to or above 1200 rpm.

Approx. duration

(minutes)

Total consumption

Kwh/litres

Description of programme

Washing product

compartment

125

120

1.75/53

1.6/49

Normal wash, rinses, automatic

absorption of additives if required and

final long spin

Delicate wash, rinses, automatic

absorption of additives if required and

final gentle spin

WOOL wash, rinses, automatic

absorption of additives if required and

final gentle spin

SHORT wash, rinses, automatic absorption of

additives if required and final long spin

Rinses, automatic absorption of additives

if required and final long spin

Automatic absorption of fabric softener

and final long spin

Emptying and final long spin

—

Emptying and end of programme.

Programme proceeds to final position.

0.85/49 0.95/53 130 135

0.6/49 0.6/53 125 130

0.35/49 0.4/53 120 125

0.15/49 0.15/53 95 100

0.7/44 0.7/48 75 80

0.4/44 0.4/48 70 75

0.2/44 0.25/48 65 70

0.1/44 0.1/48 60 65

0.5/52 0.5/52 45 50

0.05/52 0.05/52 45 50

0.25/35 0.3/35 50 50

0.05/40 0.05/40 30 30

0.05/15 0.05/15 15 15

0.05/0 0.05/0 8 8

0/0 0/0 2 2

( )

LJ6A017K8.01 21/9/01 20:27 Página 29

9.- Prior cleaning

With the aim of evacuating and cleaning

the inside of the washing machine of the

possible remains of lubricant materials and

test water, it is advisable to undertake a

prior cleaning of your washing machine

before using it for the first time with clothes.

The following operations may be carried

out for such purpose:

— Press the power supply key of the was-

hing machine (key pushed outwards)

— Insert a dosage of detergent into

the compartment of the SOAP

DISPENSER.

— Select the Normal 90ºC WASHING

PROGRMME programme using the

selector control.

— Start the washing machine by pressing

the Start/Stop key.

— Wait until the programme finishes.

10.- Cleaning and special

care

(Fig. 6)

Your washing machine is fitted with a self-

cleaning pump and therefore does not

require any cleaning or maintenance.

However, certain objects may accidentally

fall into the pump (e. g. buttons, coins, pins,

etc.) and as it is not a good idea for them to

be expelled through the drain pipe, they

will be caught by an accessible filter in the

front of the pump to prevent any jamming.

To gain access to the pump, you just have to

remove the panel-kickplate covering the

bottom part of your washing machine

(Figure 6A) and proceed as follows:

With the aid of a screwdriver, first of all

undo the two screws at the side (A), and

then disengage the lug (D) at the top, turn

in the direction of the arrow (F) and disen-

gage the three lugs (B).

Place a flat container under the filter to

catch the small amount of water that will

come out when you remove the filter cover.

Turn the filter cover anticlockwise and remo-

ve from the pump chamber any fluff or small

objects that have built up over time.

In the case of figure 6B, turn the cover Z anti-

clockwise with the help of a coin.

To put everything back in place, just carry

out these instructions in reverse and ensure

that the filter cover is properly closed.

Warning: For safety reasons, before remo-

ving the cover-kickplate, ensure that the

wash cycle is over and unplug the machine

from the mains supply.

11.- Practical advice for

optimizing washing

We now offer you some advice which you

should take into account when using your

washing machine.

Advice referring to the different types of

clothes that you may wash, as well as the

different types of detergents that may use.

Consult this advice thoroughly. Familiarize

yourself with it, as it will help you to obtain

better washing results and also optimum

maintenance of your washing machine.

Classification of clothes

Classify the different items of clothing

according to their:

— COLOUR

— DIRTINESS

— SENSITIVITY

Colour

— Before inserting clothes inside the was-

hing machine, select the garments

according to the type of fabric and soli-

dity of their clothes.

— Wash white garments separately from

coloured ones.

— If the coloured garments are new, we

advise that you wash them separately

several times.

Dirtiness

— Classify clothes according to their dirti-

ness, taking special care with those that

ENGLISH

LJ6A017K8.01 21/9/01 20:27 Página 30

are very dirty or have some type of

special stain.

— Previously treat the very dirty areas,

especially necks and cuffs.

— Wash slightly dirty garments preferably

in a short programme. In this way, you

will save energy as well as obtaining

excellent results from washing.

— Wash averagely dirty garments in a

normal washing programme.

— Wash very dirty garments in a long

programme with prewash

Sensitivity

Certain garments, either due to their fabric

or manufacture, may be sensitive to move-

ment. In order to wash them, we advise

using the DELICATE PROGRAMMES in

your washing machine.

Woollen garments may be washed in the

SPECIAL PROGRAMMES FOR WOOL in

your washing machine.

Previously ensure that your woollen gar-

ments may be machine-washed.

Conservation symbols

These symbols are normally found on the

labels located on the necks and side seams

of garments. These symbols indicate:

— Maximum WASHING temperature.

— Types of cleaning with which they may

or may not be washed.

— Products with which they may or may

not be washed.

— Treatment for their conservation.

— Temperatures and suitable forms of iro-

ning.

Drawings of conservation symbols

12.- Treatment of stains

On many occasions, and given the type and

characteristics of some stains, you do not

obtain the desired results from washing.

Below we provide you with a series of spe-

cial forms of treatment you may use on

these stains before inserting the garments

in the washing machine.

Stains that are soluble in water

Although they may be stubborn, treat these

stains using a mass of detergent or with a

washing paste.

ENGLISH

May be washed at 30º

May be washed at 40º

May be washed at 60º. Coloured clothes

May be washed at 90º. Resistant clothes

Cannot be washed at home

Bleach may be used

Bleach cannot be used

Dry clean

Do not dry clean

Washing machine drying

Not washing machine drying

Dry clean and special treatment

Dry clean. Only use mineral solvents:

Benzine, turpentine, etc.

Dry clean. Perchloroethylene in addition to

those mentioned above may be used.

Dry clean. All the solvents mentioned may

be used.

Iron using mild heat

Iron using medium heat

Iron using strong heat

Do not iron at home

Wool

LJ6A017K8.01 21/9/01 20:27 Página 31

Stains that are insoluble in water

Treat these stains with a special cleaning

agent.

Special stains

Felt-tip pen and ballpoint pen: Rub them

with a cloth soaked in alcohol.

Candle wax: Cover these stains with a

sheet of blotting paper and iron them at a

temperature which is suitable for the fabric.

If necessary, repeat the operation.

Resin, grease and skin cream: Clean them

using petrol stain remover and then wash

them.

Tar: Rub them with butter and leave the

butter to work on the stain for a while. Then

wash them.

Blood, milk and egg: Soak them in cold

water and then wash them with enzymatic

detergent at a temperature of between 50º

and 60º, provided that the type of fabric of

the garment allows this.

Fruit, coffee and wine: These stains nor-

mally disappear after several washes.

In case you should come up against some

type of non-washable or particularly seve-

re stain, ask a specialist for advice. In any

event, DO NOT USE CHEMICAL PRO-

DUCTS IN THIS WASHING MACHINE

13.- Practical advice for

loading clothes into the

drum

— Provided it is possible to do so, it is

advisable to load the washing machine

to its maximum capacity. In this way you

will be able to considerably reduce

water and energy consumption.

— When you have to wash either very

dirty clothes or some spongy garments

(towels, swimming costumes, etc.), it is

advisable to reduce the maximum load

envisaged.

We recommend that where possible you

wash garments of different sizes in the

same washing programme. In this way the

washing action is reinforced, thus benefi-

ting the way the clothes are distributed insi-

de the drum during the spin; this will also

result in the machine running more quietly.

14.- General advice for

washing

— If items of clothing are washed that

withstand different washing temperatu-

res, the lowest temperature must always

be selected.

— As a general rule, whiteners may only

be used to wash white resistant fabrics

such as cotton, linen, etc.

— Synthetic fibre, mixed and delicate gar-

ments should be washed in delicate

programmes so as to prevent the for-

mation of creases that may prove diffi-

cult to remove when ironing.

— It is advisable to complement delicate

programmes with a brief spin. In this

way, the effectiveness of the rinses will

increase and the clothes will be remo-

ved well drained.

— Only wool with this symbol may be

machine-washed.

15.- General advice

Maintenance

Before carrying out any cleaning or main-

tenance operation, it is advisable to discon-

nect the washing machine from the mains.

Cleaning

Following each wash, leave the LOADING

DOOR open for a while so that air may fre-

ely circulate around the inside of the

machine.

From time to time, it is advisable to run a

complete washing cycle using a decalcif-

ying agent. This will extend the working life

of your washing machine.

External cleaning

For the external cleaning of your washing

machine use warm soapy water or a mild

ENGLISH

LJ6A017K8.01 21/9/01 20:27 Página 32

cleaning agent that is neither abrasive nor

solvent. Then dry it well with a soft cloth.

Cleaning the soap dispenser

Clean the SOAP DISPENSER all the time

you notice the residue of some washing

product in it. Carry out the following opera-

tions for such purpose:

1. Completely remove the SOAP DISPEN-

SER by pulling the handle outwards

(Fig.4).

2. Clean the COMPARTMENTS of the DIS-

PENSER using warm water and a

brush.

3. Also clean the SIPHON of the additive

dispenser (Fig.5).

Once these operations have been carried

out, insert the dispenser again in the was-

hing machine.

16.- Troubleshooting

Should a problem arise when using your

washing machine, you may most likely

solve it after consulting the guidelines

below:

Otherwise, disconnect the appliance and

contact AFTER-SALES SERVICE. There is

no fuse or similar component inside the

machine that may be replaced by the user.

We ask that under no circumstances do you

open up the machine.

The washing machine fails to start

— There is no mains voltage

— The electrical installation fuses have

blown.

— The washing machine is not connected

to the mains.

— The door of the washing machine is not

properly closed.

— The power supply key of the washing

machine is disconnected (the key must

be pushed out).

— The Start/Stop key has not been pres-

sed (the light-up switch of this key must

be permanently on).

The washing machine vibrates or makes

excessive noise

— The INSIDE BINDING SCREWS have

not been removed.

— The washing machine is badly levelled

(consult the installation manual).

Important: Your washing machine is in

possession of a safety system in the spin

that prevents the latter from reaching an

excessive level of vibration where the dis-

tribution of clothes in the drum might cause

this to happen. If in a particular case you

should detect that the clothes have not

been suitably drained, try to spin them

again after having spread them out more

uniformly in the drum.

17.- Detection or indication

of faults and

breakdowns

Some malfunctions and breakdowns are

easily detectable by your washing machine

and are indicated as such so that you may

solve the problem yourself wherever possi-

ble. Alternatively, it facilitates your getting

in contact with After-Sales Service.

Indication of faults

When an abnormal situation is detected,

the fault is then displayed. The light-up

switches of the Washing, Rinse and End sta-

ges are used for such purpose.

Washing Rinse End

O O O

Fault in the entry of water: the Washing

and Rinse light-up switches start flashing

alternately.

Fault in emptying: the Rinse and End

light-up switches start flashing alternately.

Any other type of fault: all three Washing,

Rinse and End light-up switches start flas-

hing simultaneously.

Action to be taken

Depending on the type of fault detected,

the action to be taken is as follows:

ENGLISH

LJ6A017K8.01 21/9/01 20:27 Página 33

Fault in the entry of water: due to the

water supply being cut off, the washing

water inlet tap being off or water inlet filter

being obstructed.

— wait until the water supply resumes.

— turn on the water inlet tap.

— release the water inlet hose of the was-

hing machine and clean its filter.

Fault in emptying: due to obstruction of

the drainage pump of the washing machi-

ne, due to obstruction of the drainage

piping of the building or due to improper

electrical connection of the pump.

— if your washing machine possesses an

accessible filter, a sheet of paper will

have been included with this manual in

which is indicated how to proceed with

its cleaning.

— if your washing machine does not have

an accessible filter, call After-sales

Service.

Any other type of fault: due to a fault in the

water heating system, movement of the

washing drum, etc.

— call After-sales Service.

ENGLISH

LJ6A017K8.01 21/9/01 20:27 Página 34

Inhaltsverzeichnis

1.- Einleitende Bemerkungen ................................................................................................. 37

- Machen Sie sich mit Ihrer Waschmaschine vertraut

- Installation

- Typenschild

2.- Beschreibung der Waschmaschine .................................................................................. 37

- Bedienfeld

3.- Gebrauch der Bedienelemente und Wahltasten............................................................. 38

- Taste für die Spannungsversorgung der Waschmaschine

- Programmwahlschalter

- Tasten mit Zusatzfunktionen

Vorwaschtaste

Extra-Klarspültaste

Wahltaste zum Schleudern/Schongang

- Ein-/Aus-Taste

4.- Eingabe von Wäsche in die Trommel .............................................................................. 39

- Öffnen der Gerätetür

- Laden der Wäsche in die Trommel

5.- Eingabe von Waschmitteln und Zusatzmitteln................................................................. 40

- Optional erhältliche Waschmittelschublade

6.- Waschmittel.......................................................................................................................... 40

- Waschmitteldosierung

7.- Durchführung eines Waschprogramms ........................................................................... 41

- Auswahl eines Waschprogramms

- Inbetriebnahme

- Programmende

- Unterbrechung

- Stornierung des in Ausführung befindlichen Waschprogramms

- Schutz gegen Unterbrechungen der Spannungsversorgung

8.- Waschprogramme............................................................................................................... 43

- Auflistung der Waschprogramme

9.- Einleitende Reinigung ........................................................................................................ 46

DEUTSCH

LJ6A017K8.01 21/9/01 20:27 Página 35

10.- Reinigungs- und Instandhaltungsarbeiten..................................................................... 46

11.- Praktische Ratschläge zur Optimierung des Waschvorgangs .................................... 46

- Sortieren der Wäsche

- Buntwäsche

- Verschmutzungsgrad

- Empfindliche Wäsche

- Wäschesymbole

- Zeichnungen auf den Wäschesymbolen

12.- Behandlung von Flecken ................................................................................................. 47

- In Wasser lösliche Flecken

- Nicht in Wasser lösliche Flecken

- Besondere Flecken

13.- Praktische Ratschläge zum Laden der Wäsche in die Trommel ................................ 48

14.- Allgemeine Ratschläge zum Waschen Ihrer Wäsche................................................... 48

15.- Allgemeine Ratschläge .................................................................................................... 48

- Wartung

- Reinigung

- Reinigung des Geräteäußeren

- Reinigung der Waschmittelschublade

16.- Fehlerbehebung ............................................................................................................... 49

- Die Waschmaschine nimmt den Betrieb nicht auf

- Die Waschmaschine vibriert oder gibt anormale Geräusche von sich

17.- Feststellung und Anzeige von Fehlern und Störungen ................................................ 49

- Fehleranzeige

- Zu ergreifende Maßnahmen

DEUTSCH

LJ6A017K8.01 21/9/01 20:27 Página 36

1.- Einleitende

Bemerkungen

- Machen Sie sich mit Ihrer

Waschmaschine vertraut

Zunächst sollten Sie sich gründlich mit

Ihrer neuen Waschmaschine vertraut

machen. Um Ihnen das Auffinden der vers-

chiedenen Vorrichtungen und Elemente,

mit denen Ihre Waschmaschine ausgestat-

tet ist, zu erleichtern, ist das vorliegende

HANDBUCH mit einigen Abbildungen ver-

sehen, die sich am Ende dieses Anwei-

sungshandbuchs befinden. Wir möchten

Sie dazu ermuntern, diese Abbildungen zu

benutzen, da diese eine Reihe von

Darstellungen enthalten, die Ihnen ohne

Zweifel das Verständnis erleichtern und

Ihnen beim Auffinden der verschiedenen

Elemente Ihres Geräts behilflich sind.

- Installation

Die Installationsarbeiten der WASCHMAS-

CHINE müssen gemäß den gültigen

Normen vorgenommen werden. Die spe-

ziellen Anweisungen zur Installation befin-

den sich im INSTALLATIONSHANDBUCH.

WICHTIG: Vor der Inbetriebnahme der

Waschmaschine denken Sie bitte daran,

daß die für den Transport vorgesehenen

BEFESTIGUNGSSCHRAUBEN entfernt

werden müssen. Ziehen Sie hierzu bitte

das Installationshandbuch zu Rat.

- Typenschild

An der Vorderseite Ihrer WASCHMASCHI-

NE befindet sich das TYPENSCHILD ange-

bracht, auf dem sich die technischen Daten

und die Angaben zur Kennzeichnung die-

ses Geräts befinden. DIESE ANGABEN

MÜSSEN BEI DER HERSTELLUNG DER

ELEKTRISCHEN ANSCHLÜSSE BERÜCK-

SICHTIGT WERDEN.

Aus Gründen des Umweltschutzes ist Ihre

Waschmaschine mit einem besonderen

System ausgerüstet, das die Anpassung

des Gerätes an verschiedene Einsatzbe-

dingungen (Trommelfüllung der Wäsche

und Gewebeart) ermöglicht, wodurch der

optimale Wasserstand und Energie-

verbrauch unter Beibehalt derselben

Wasch- und Klarspülergebnisse garantiert

werden. Aus diesem Grunde ist die

Wassermenge, die über die Sichtkontrolle

beobachtet werden kann, während des

Waschvorgangs gering.

Zusätzlich ist die Waschmaschine mit

einem patentierten System ausgerüstet,

welches die Trommel bei den Wasch-

programmen für normale Gewebe

(Baumwolle, Leinen, usw.) jeweils kurzfris-

tig (2 Sekunden) schneller als gewöhnlich

dreht. Je nach vorgewählter Temperatur

geschieht das zwischen drei und zehn mal

während des gesamten Waschvorgangs.

2.- Beschreibung der

Waschmaschine

(Abb. 1)

1.- Abdeckplatte.

2.- Gerätetür.

3.- Türgriff. Gerätetür.

4.- Sockel.

- Bedienfeld (Abb. 2)

1.- Taste für die Spannungsversorgung

der Waschmaschine

2.- Ein-/Aus-Taste

3.- Optionale Taste für Vorspülprogramm

4.- Optionale Extra-Klarspültaste

5.- Optionale Wahltaste zum

Schleudern/Schongang

6.- Programmwahlschalter

7.- Leuchtanzeige für verriegelte Tür

8.- Leuchtanzeige für Ein-/Aus-Taste

9.- Leuchtanzeige für Vorspültaste

10.- Leuchtanzeige für Extra-Klarspültaste

11.- Leuchtanzeige für die WASCHPHASE

12.- Leuchtanzeige für die KLARSPÜL-

UND SCHLEUDERPHASE

13.- Leuchtanzeige für PROGRAMMENDE

14.- Leuchtanzeige für die Option

Schongang

15.- Leuchtanzeigen für die

Schleudergeschwindigkeit

16.- Waschmittelschublade

DEUTSCH

LJ6A017K8.01 21/9/01 20:27 Página 37

Page is loading ...

Brandt CL-700_EL Owner's manual

Brand: Brandt

Model: CL-700_EL

Category: Washing machines

Type: Owner's manual

This manual is also suitable for

FE-2013

Download PDF

report

in other languages

Deutsch: Brandt CL-700_EL Bedienungsanleitung

Brandt CL-700_EL Owner's manual

This manual is also suitable for

Brandt CL-700_EL Owner's manual

in other languages

Related papers

Other documents