Miller HE002076 Owner's manual

Category
Welding System
Type
Owner's manual

This manual is also suitable for

Miller HE002076 allows you to adjust the amperage output from the input circuitry in 50-ampere increments from 50 to 350 amperes. It is also protected from damage due to excessive overload by a 400-ampere fuse connected in the input circuitry. With it, you can also function as a welding control station remotely located from the main power source. It provides a receptacle to which the electrode cable is to be connected and also a coarse and fine current control.

Miller HE002076 allows you to adjust the amperage output from the input circuitry in 50-ampere increments from 50 to 350 amperes. It is also protected from damage due to excessive overload by a 400-ampere fuse connected in the input circuitry. With it, you can also function as a welding control station remotely located from the main power source. It provides a receptacle to which the electrode cable is to be connected and also a coarse and fine current control.

  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7

Miller HE002076 Owner's manual

Category
Welding System
Type
Owner's manual
This manual is also suitable for

Miller HE002076 allows you to adjust the amperage output from the input circuitry in 50-ampere increments from 50 to 350 amperes. It is also protected from damage due to excessive overload by a 400-ampere fuse connected in the input circuitry. With it, you can also function as a welding control station remotely located from the main power source. It provides a receptacle to which the electrode cable is to be connected and also a coarse and fine current control.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages