Intermec CAB-SG20-USB001 Datasheet
- Category
- Battery chargers
- Type
- Datasheet
Accessory Name Part Number Description
Holder Base in Black
(No Battery Charge)
HB-SG20-001 Holds the tethered scanner (SG20T)
for use in auto trigger presentation
mode. This base holds the scanner
in a vertical orientation, minimizing
the countertop footprint.
Charge Base in Black
(No Bluetooth or Interface)
CB-SG20-001 Holds the wireless scanner (SG20B)
for use in presentation auto trigger
mode, and also recharges the
wireless battery. This base holds
the scanner in a vertical orientation,
minimizing the countertop footprint.
Bluetooth Communication
Base in Black
(Bluetooth and Interface)
BB-SG20-001 Combines a holder, charger,
communication and host interface
in one compact solution. For use
with wireless scanners (SG20B).
A plug-and-play solution.
Charge Base in Healthcare
Disinfectant-Ready White
(No Bluetooth or Interface)
CB-SG20HC-001 Holds the wireless scanner (SG20B) for
use in presentation auto trigger mode,
and also recharges the wireless battery.
This base holds the scanner in a vertical
orientation, minimizing the countertop
footprint. Features a white housing
made of disinfectant resistant material.
Bluetooth Communication Base
in Healthcare Disinfectant-
Ready White
(Bluetooth and Interface)
BB-SG20HC-001 Combines a holder, charger,
communication and host interface in
one compact solution. For use with
wireless scanners (SG20B). A plug and
play solution. Features a white housing
made of disinfectant resistant material.
Adjustable Desktop Stand STAND-SG20-01 Raised adjustable stand for use
with the tethered scanner (SG20T)
in auto trigger hands free mode.
Allows for greater scan angle
adjustments for dierent mixed
merchandise sizes. Small footprint
minimizes countertop space.
Desktop/Wall Mount Holder HOLDER-SG20-01 Holds the scanner when not in use.
Can be installed horizontally on a
countertop or vertically against a wall.
Includes mounting kit consisting of
two screws and double-stick tape.
Holders and Chargers
Accessory Guide
SG
20
Accessory Name Part Number Description
USB Interface Cable
(6 Feet, Straight)
CAB-SG20-USB001 For use with Charge Bases, this USB
interface cable provides connectivity
between the base station and host
device. Six foot length, straight.
Serial Interface Cable
(6 Feet, Straight)
CAB-SG20-SER001 For use with Charge Bases, this serial
(RS-232) interface cable provides
connectivity between the base station
and host device. Six foot length,
straight. Includes power supply plug-in.
KBW Y-Cable
(6 Feet, Y, Straight)
CAB-SG20-KBW001 Keyboard wedge Y-cable connects
between the keyboard and host
computer. Includes connection
for optional power supply.
Universal Power Supply
(5V with Ferrite Level V)
851-089-306 This 5V DC power supply provides
scanner power and/or battery
recharge for wireless models.
Use when host device power is
insucient to charge device or power
scanner in tethered applications.
Cables and Power
Accessory Guide
SG
20
Copyright © 2011 Intermec
Technologies Corporation. All
rights reserved. Intermec is a
registered trademark of Intermec
Technologies Corporation.
All other trademarks are the
property of their respective
owners. Printed in the U.S.A.
612173-01A 12/11
-
1
-
2
Intermec CAB-SG20-USB001 Datasheet
- Category
- Battery chargers
- Type
- Datasheet
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI