The Mini PCI-Express I/O card uses the PCI-Express interface standard for expansion bus,
enabling this card to be installed on any embedded or micro system with Mini PCI-Express
expansion capability. Most of the latest motherboards no longer come with legacy serial
port. By using this card, end user can add serial and/or parallel ports to the computer for
connecting their I/O devices. The card offers superior performance and unmatched data
transfer rates. It is also ideal for industrial automation applications.
A native PCI-Express single chip design
Supports Re-map function for legacy ports
Offers up to 2x RS-232 and 1x Parallel internal ports
Fully compliant with PCI-Express Base Specification Revision 1.1
Single-Lane (x1) PCI-Express with throughput up to 2.5Gbps
Compatible with PCI-E Mini Card Electromechanical specification revision 1.2
Compatible with Full-Mini (F1) card type form factor
Supports Windows 7 / Vista / XP / Server 2003-2008 32/64-bit, Linux
Serial Port (RS-232) Interface: Compatible with industrial standard 16C450/16C550
UART
On chip 256-byte depth FIFO in transmit, receive path of each port
Maximum data rate 230.4Kbps on each port (Special version can support up to 1Mbps)
Available jumpers setting for pin-9 on the DB9 connectors with the options of 5V, 12V
or RI signal
Supports hardware and software flow control
Supports 5-, 6-, 7-, 8- bit serial format
Supports Even, Odd, None, Space & Mark parity
Supports 1 or 2 Stop bit operation
Parallel Port (IEEE 1284) Interface: IEEE 1284 compatible parallel port
Supports SPP, PS2, EPP and ECP mode operation
Fast data rates up to 1.5Mbps
System Requirement: Computer system with one Mini PCI-Express slot available,
Properly installed one of the supported OS mentioned above
Package Content: Mini PCI-Express I/O Card x 1, User Manual x 1, Software Driver
CD x 1
© INTOS ELECTRONIC AG · Siemensstraße 11 · D-35394 Gießen