KRAUS FUS-14003BN User manual

Brand: KRAUS

Model: FUS-14003BN

Category: Faucets

Type: User manual

KRAUS FUS-14003BN is an 8-inch widespread basin bathroom faucet with two handles. It features a durable construction with a lead-free finish, ensuring longevity and safety. The faucet's widespread design allows for easy installation and provides ample space for comfortable handwashing. The two handles offer precise control over water temperature and flow rate, making it convenient for various tasks. The included aerator helps conserve water and creates a gentle, splash-free stream. Additionally, the faucet's high-quality cartridges ensure smooth operation and prevent leaks or drips.

Kohra™ Two Handle 8-Inch

Widespread Basin Bathroom

Faucet

FUS-14003

INSTALLATION GUIDE

Thank you for your purchase

We would like to take this opportunity to thank you for choosing Kraus.

We hope that you are completely satisfied with your purchase, and enjoy it for

years to come. If you have any questions, or require technical assistance, please

For more information about Kraus products, please visit:

www.kraususa.com

In order to activate your warranty and get faster access to customer support,

please register your new Kraus product at:

www.kraususa.com/registration

Sincerely,

Kraus USA Customer Service

Prior to Installation:

· Make sure you have all necessary parts by checking the diagram and

parts list. If any part is missing or damaged, please contact Kraus

Customer Service at 800-775-0703 for a replacement.

· Turn off the hot and cold water supply at the angle stops and turn on

the old faucet to release any built up pressure. Remove existing faucet.

Clean sink or countertop to remove any debris, plumber’s putty, or

silicone.

· Flush angle stops to release any debris prior to installation.

· Pre-drilled hole size requirement: 1 3/8" (min)

· Max countertop thickness: 1 7/8”

Tools You Will Need

Adjustable Wrench Bucket Phillips Screwdriver

Safety Goggles

Installer Tip:

Shut off main water supply before installing new faucet.

Dimensions

6.3

14 7/8"

(379mm)

(177.1mm)

3 5/8"

(91.3mm)

5 3/8"

(136.6mm)

4 3/4"

(121.7mm)

1/2-14NPSM-2A

MAX 1 7/8"

(47.1mm)

8 3/4"

(223.8mm)

Ø1 1/4"

(32mm)

Ø2 1/8"

(54mm)

1 3/4" -2 3/4”

(43.3-68.3mm)

5 5/8"

(141.6mm)

1 1/4-18UNEF-2A

Included in the Box

A. Hot Handle Valve

B. Spout

C. Aerator

D. Aerator Wrench

E. Cold Handle Valve

F. Spout Mounting Hardware

F1. Rubber & Metal Washer

F2. Mounting Nut

G. Three Way Connector

H. Hot & Cold Handle

Mounting Hardware

H1. Spacer

H2. Metal Washer

H3. Mounting Nut

H4. Mounting Screws

I. Hex Wrench

Included in the Box - Lift Rod Drain

b h i j k

a. Waste Stopper

b. Drain Flange

c. Rubber Washer

d. Concave Washer

e. Metal Washer

f. Mounting Nut

g. Tail Pipe

h. Top Hat Washer

i. Drain Off Pole

j. Washer

k. Retaining Nut

l. Clip

m. Extender Rod

n. Thumb Screw

o. Lift Rod

Faucet installation

Step 1. Remove mounting hardware

Remove three way connector (G)

and mounting hardware (F) from

spout (B). Remove mounting

hardware (H) from hot and cold

valves (A&E).

Step 2. Installing the faucet assembly

Insert spout (B) through hole in

sink or countertop. Secure spout

with mounting nut (F2) with an

adjustable wrench.

Installer Tip: Make sure slot

opening of u-washer (F1) faces

toward rear of sink.

Step 3. Installing handles

Step 4. Attach connector

Insert hot & cold handle valves

(A&E) through hole in sink or

countertop. Attach hot & cold

mounting hardware (H). Secure

with adjustable wrench and Phillips

head screwdriver.

Attach three way connector (G) to

spout (B). Attach supply lines of hot

& cold valves (A&E) to three way

connector (G). Push until you hear

a click.

Click

Installer Tip: Pull supply lines

moderately to ensure connection is

secure.

Step 5. Connect waterlines

Attach waterlines (not included)

to valves (A&E) and angle

stops. Tighten until snug. Turn

on angle stops and check for

leaks. (DO NOT TURN FAUCET

ON)

Step 6. Install drain

Remove waste stopper (a) and

drain flange (b) from tail pipe

(g). Remove concave washer (d),

metal washer (e) and mounting

nut (f) from drain flange (b).

Installer Tip: Recommended

waterlines: 3/8 in. OD x ½ in IPS

Insert 2

Insert 1

Step 6. Install drain - continued

Insert drain flange (b) through

drain hole with rubber washer

place concave (d) and metal (e)

washer on drain flange. Secure

with mounting nut (f). Thread

tailpipe (g) onto drain (b) and

hand tighten.

Insert waste stopper (a) into

drain flange. Remove extender

rod (m) and clip (l) from drain

off pole (i). Remove nut (k).

Insert drain off pole (i) into

drain pole opening of tailpipe

(g). See Insert 1. Secure nut (k)

to drain off pole opening of

tailpipe (g).

Insert lift rod (o) through spout

(B) and connect with extender

rod (m). Tighten thumb screw

(n).

Installer Tip: For quick removal,

rotate stopper 90 degrees left or

right, so drain off pole (i) does not

go through hole in stopper (a).

Step 6. Install drain - continued

Step 7. Flush faucet

Attach drain off pole (i) to

extender rod (m) with clip (l).

Loosen thumb screw (n) on

extender rod (m). Push down

on lift rod (o) until stopper is in

open position. Retighten thumb

screw (n).

Remove aerator (C) with aerator

wrench (D). Turn water on for

1 minute to remove any debris.

Reassemble aerator (C).

Replacement Parts

Replacement Part

1. Handle

2. Set Screw

3. Cover Button

4. Screw

5. Handle Cover

6. Lock Nut

7. Cartridge H

8. Cartridge C

9. Spacer

10. Metal Washer

11. Mounting Nut

12. Mounting Screws

13. Rubber U-Washer

14. Metal U-Washer

15. Spout Nut

16. Three Way Connector

17. Aerator

18. Aerator Key

19. Lift Rod

20. Drain

21. Hex Wrench

Part No.

KP27000

KP27001

KP27002

KP27003

KP27004

KP27005

KP27006

KP27007

KP27008

KP27009

KP27010

KP27011

KP27012

KP27013

KP27014

KP27015

KP27016

KP27017

KP27018

KP27019

KP27020

Finish

SFS

NSF/ANSI Standard 61 certified by IAPMO

NSF/ANSI Standard 372 certified by IAPMO

Trouble-Shooting

If you have followed the instructions carefully and your faucet still does not work properly, take the following corrective steps:

Leakage under faucet handle

Hot or cold cartridge (7 or 8) may be

loose.

Remove cover button (3). Loosen set

screw (2) with hex wrench (21). Remove

H or C handle (1). Unscrew handle cover

(5) by hand. Tighten lock nut (6) with

adjustable wrench.

Water will not shut off completely

Cartridge (7 or 8) may need to be

adjusted or replaced.

Remove cover button (3). Loosen set screw

(2) with hex wrench (21). Remove H or C

handle (1). Unscrew handle cover (5) by

hand. Unscrew lock nut (6) with and

adjustable wrench. Remove cartridge (7 or

8) and check for cracks.

PROBLEM CAUSE ACTION

Aerator drips or has inconsistent

water flow pattern

Aerator (17) is dirty or not seated

properly.

Unscrew aerator (17) with aerator key (18)

and clean out debris.

Drain is leaking

Washers may be compromised or

installed incorrectly.

Check washers to make sure they are

installed correctly and not cracked.

Codes/Standards Applicable:

LEAD FREE

Meets ASME A112.18.1/CSA B125.1

1.2gpm 4.5L/min. maximum

There is a low flow of water

The screen filter in the hose

connectors is dirty.

Turn off the water supply at water valve

and unscrew the hose connectors from

water supply lines. Clean the screen in the

water lines with hot water, removing any

debris or calcium build up.

FAUCET WARRANTY

Kraus products are manufactured and tested to the highest quality standards by Kraus USA Inc. ("Kraus").

Kraus extends this warranty to the original purchaser for personal household use of the "Faucet" in its original location.

The warranty is non-transferable.

Kraus warrants the structure and finish of the product to be free from defects in material and workmanship under normal

usage for the lifetime of the product. The warranty commences from the initial date of purchase by the owner or trade

professional, from an authorized Kraus dealer, through the lifetime of the original owner or end-user.

Kraus warrants the mechanical components such as but not limited to sprayhead assembly (includes engine, aerators,

structure, restrictors, back flow preventers, sprayer hoses, braided supply line hoses which encompasses nylon, silicon

and stainless steel,etc) of the product to be free from defects in material and workmanship under normal usage for a

period of one (1) year. The warranty commences from the initial date of purchase by the owner or trade professional,

from an authorized Kraus dealer, through the one (1) year term of the original owner or end-user.

Kraus warrants the mechanical component (cartridge) of the product to be free from defects in material and

workmanship under normal usage for a period of five (5) years. The warranty commences from the initial date of

purchase by the owner or trade professional, from an authorized Kraus dealer, through the five (5) year term of the

original owner or end-user.

Any product reported to the authorized dealer or to Kraus as being defective within the warranty period will be repaired

or replaced with a product of equal value at the option of Kraus. This warranty extends to the original owner or end-user,

and is not transferable to a subsequent owner.

RESTRICTIONS

This warranty does not cover antediluvian, discontinued, or display products, whether such items are purchased at

discount outlets, unauthorized dealers, and/or sold on clearance.

This warranty does not cover instances of negligence, misuse, abuse, improper installation, carelessness, accident, hard

water or mineral deposits, exposure to corrosive materials, misapplication, damages caused by improper maintenance,

alteration of the product, or failure to follow care or installation instructions enclosed with your product. Avoid using

abrasive cleaners such as powders, bleach, ammonia, alcohol, or chlorine. Avoid using abrasive pads, steel wool, or wire

brushes, as these will damage and wear down the finish.

This warranty does not apply to Products that have not been installed or operated in accordance with instructions

supplied by Kraus and all applicable rules, regulations, and legislation pertaining to such installations.

This warranty does not apply unless the Kraus product is installed by a fully insured and licensed trade professional.

Kraus insists that such professionals have experience in the installation of bathroom and kitchen manufactured goods.

This warranty does not cover labor charges or costs of removal and reinstallation of said product. This warranty does not

allow recovery of incidental or consequential damages, such as loss of use, delay, property damage, or other

consequential damages, and Kraus accepts no liability for such damages.

This warranty does not cover Marine or Outdoor Installation.

Except as otherwise provided above, Kraus makes no warranties, expressed or implied, including warranties

of merchantability and fitness for a particular purpose, or compliance with any code.

Shipping charges will be covered for the first (1) year of the warranted replacement part or product (HI, AK, and Puerto

Rico shipping charges may apply). International shipping fees are not included.

HELP LINE

For additional assistance at any point in the installation process, please call us at 800-775-0703 or email us at

[email protected]. Our customer service hours are Monday – Friday, 9am – 8pm EST. Be sure to visit our

website at www.kraususa.com.

If you are a homeowner please contact a Kraus Customer Service Representative at:

Kraus USA, Inc.

12 Harbor Park Drive

Port Washington, NY 11050

Toll-free 800-775-0703

[email protected]

If you are a plumbing contractor or trade professional please contact a Kraus Pro Representative at:

Kraus USA, Inc.

12 Harbor Park Drive

Port Washington, NY 11050

516-801-8955

[email protected]

If you are an Authorized Partner please contact a Partner Support Representative at:

Kraus USA, Inc.

12 Harbor Park Drive

Port Washington, NY 11050

516-801-8954

[email protected]

In requesting warranty service, please be ready to provide:

1. Proof of purchase.

2. A description of the problem.

Download the Kraus Care & Maintenance Guide at:

http://www.kraususa.com/maintenance

Commercial Warranty

Kraus extends the above warranty for a period of one (1) year to purchasers of products for industrial, commercial,

and business use.

All incidental or consequential damages are specifically excluded. No additional warranties, express or implied, are given,

including but not limited to any implied warranty of merchantability or fitness for a particular purpose.

Some states do not allow the exclusion or limitation of incidental or consequential damages or limitations on how long

an implied warranty lasts, so the above limitations or exclusions may not apply to you.

This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.

KRAUS USA has the right to change, modify, and/or update the warranty policy at any time. For the latest, most up to

date comprehensive warranty, go to www.kraususa.com/warranty.

www.kraususa.com

Receive Proof of Ownership

Access Customer Care & Installation Help

Get Exclusive Kraus Offers & Promotions

Scan to Register Online

or visit http://www.kraususa.com/registration

Please take a moment to share your experience.

Visit http://www.kraususa.com/review to let us know what you think

about your new Kraus product.

1.800.775.0703 / www.kraususa.com / [email protected]

Like & Follow KrausUSA

Download the Kraus Care & Maintenance Guide at:

http://www.kraususa.com/maintenance

We're always looking for ways to improve.

KRAUS FUS-14003BN User manual

Brand: KRAUS

Model: FUS-14003BN

Category: Faucets

Type: User manual

Download PDF

report

KRAUS FUS-14003BN User manual

KRAUS FUS-14003BN User manual

Related papers

Other documents