THE PiCKiT SMART PRINTER
QUICK START GUIDE
Models: PiCKiT20, PiCKiT21RD - www.pyleUSA.com
INITIAL SETUP:
1. Download the “PicKit Printer” App via the Google Play or Apple Store.
2. Ensure the printer is powered on and/or charging (connected to computer via USB charger cable).
• Press and hold the power button for about 10 seconds to power ON/OFF
• When the printer is powered ON, the indicator power light shines WHITE
3. Navigate to your Smartphone’s Wi-Fi settings > Enable Wi-Fi and connect to the printer.
• Printer Wi-Fi Network Name: ‘Direct-Cube-XXXX’
• Printer Wi-Fi Network Password: ‘12345678’
PRINTING & APP ACCESS:
1. Open the “PicKit Printer” App and navigate to “Gallery”.
• You may be prompted to update the firmware of your printer to ensure compatibility with your
Smartphone. If so, select update and wait for the countdown to complete. After firmware update
completion, the printer will automatically restart and ready to print.
• Do not disturb the update and reboot process, allow 2-3 minutes for the system to automatically restart.
2. Once you return to the App’s “Gallery”, select the desired image from the Camera Roll and tap the “Print ”
button located at the top right of the screen.
TROUBLESHOOTING:
• If the printer sits idle for a period of time, it may switch to “Power Save” mode and automatically
disconnect from any paired Smartphones and/or networks. Always confirm the printer is powered ON
and connected to your Smartphone via Wi-Fi when attempting to print.
*While you’re connected to the printer’s Wi-Fi network, your Smartphone will not have data connection to the internet.
You will lose all web browsing or internet data-transfer ability until you disconnect the printer from your Smartphone.
*While you’re connected to the printer’s Wi-Fi network, your Smartphone will not have data connection to the internet.
You will lose all web browsing or internet data-transfer ability until you disconnect the printer from your Smartphone.
-
1
