Atdec TH-2250-VF Installation guide

TH-2250-VF
Atdec
Brand
Atdec
Model
TH-2250-VF
Type
Installation guide

Atdec TH-2250-VF is a fixed flat-screen wall mount designed to securely hold VESA-compliant displays weighing up to 50 kg (110 lbs). It supports mounting hole patterns of 50x50mm, 75x75mm, 100x100mm, 120x180mm, 200x100mm, and 200x200mm. The mount comes with all necessary hardware, including M4, M5, and M6 screws, washers, spacers, and plastic anchors. Installation requires a drill, spirit level, and Phillips head screwdriver. The mount features a security option using M5 security screws to prevent unauthorized removal of the display.

Atdec TH-2250-VF is a fixed flat-screen wall mount designed to securely hold VESA-compliant displays weighing up to 50 kg (110 lbs). It supports mounting hole patterns of 50x50mm, 75x75mm, 100x100mm, 120x180mm, 200x100mm, and 200x200mm. The mount comes with all necessary hardware, including M4, M5, and M6 screws, washers, spacers, and plastic anchors. Installation requires a drill, spirit level, and Phillips head screwdriver. The mount features a security option using M5 security screws to prevent unauthorized removal of the display.

RO
RO
Plastic Anchor (x4)
Self-Tapping Screw (x4)
Hardware
Dry Wall Anchor (x4)
M6 Washer
(x4)
M4x12/25/30mm
(x4 each)
M5x12/25/30mm
(x4 each)
M6x12/25/30mm
(x4 each)
Display Mounting
Screws
Self-Tapping Screw
M6 Washer
Wall Plate
Plastic Anchor
8mm (
5
16
") Hole
Dry Wall
Timber Stud
10mm (
3
8
") Hole
Dry Wall Anchor
Dry Wall Anchor Screw
M6
Washer
Wall Plate
Self-Tapping Screw
M6 Washer
Wall Plate
4mm (
3
16
") Hole
Timber Stud
13mm Spacer
Bush (x4)
20mm Spacer
Bush (x4)
M5x10mm
Security Screw (x4)
Components Checklist
Wall Plate
Display Plate
IMPORTANT INFORMATION
! IMPORTANT - Install Wall Mount as per Installation Instructions.
! This product supports a maximum load of 50kg (110lbs).
! This products only supports VESA compliant displays with 50mmx50mm (2"x2"), 75mmx75mm (3"x3"),
100mmx100mm (4"x4"), 120mmx180mm (4¾"x7"), 200mmx100mm (8"x4") and 200mmx200mm
(8"x8") mounting hole patterns.
! The manufacturer does not accept responsibility for incorrect installation.
Step 1. Check Components
Check you have received all parts against the component checklist and Hardware above.
Step 2. Mounting the Wall Plate
Tip: Use a spirit level to ensure wall plate is horizontal
Masonry Wall
Tools Required:
Power Drill
4mm (
3
16
") drill bit
Phillips Head screwdriver
8mm (
5
16
") masonry drill bit
10mm (
3
8
")
drill bit
Spirit Level
Installation Instructions
Flat Screen Wall Mount | Fixed
TH-2250-VF
Display
Wall Plate Slots
Display Plate Side Flange
Display
M5 Security
Screw
Mounting Screw
Back of Display
Display Plate
Recessed Mounting Holes
If the mounting holes are reccessed into the back of the
display, use the supplied Spacer Bushes to pack the
recessed holes. Ensure that the correct length mounting
screws are used to securely attach the plate to the display.
TOP
Mounting Screw
Back of Display
Display Plate
Spacer Bush
Recessed
Mounting Hole
Step 3. Mounting the Display Plate
With the Display Plate attached
to the Display, lift the Display,
slide into the Wall plate. Ensuring
that the side flanges engage into
wall plate slots.
Step 4. Attaching Display to Wall Plate
To properly secure the display
to the wall it is recommended
to used the four M5 security
screws to securely attach the
two plates together.
Step 5. Security Option
Installation Complete
No portion of this document or any artwork contained herein should be reproduced in anyway without the express written consent Atdec Pty Ltd.
Due to continuing product development, the manufacturer reserves the right to alter specifications without noticed. Published 01.03.10 ©
  • Page 1 1
  • Page 2 2

Atdec TH-2250-VF Installation guide

TH-2250-VF
Atdec
Brand
Atdec
Model
TH-2250-VF
Type
Installation guide

Atdec TH-2250-VF is a fixed flat-screen wall mount designed to securely hold VESA-compliant displays weighing up to 50 kg (110 lbs). It supports mounting hole patterns of 50x50mm, 75x75mm, 100x100mm, 120x180mm, 200x100mm, and 200x200mm. The mount comes with all necessary hardware, including M4, M5, and M6 screws, washers, spacers, and plastic anchors. Installation requires a drill, spirit level, and Phillips head screwdriver. The mount features a security option using M5 security screws to prevent unauthorized removal of the display.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents