Rangemaster PROP110NGFCR/C User manual

Brand: Rangemaster

Model: PROP110NGFCR/C

Category: Cookers

Type: User manual

This manual is also suitable for

Professional 110 Gas Range Cooker

Classic, Kitchener and Professional +

110 Gas

Built from experience

U110781 - 03

USER GUIDE &

INSTALLATION INSTRUCTIONS

To enter all you have to do is send in photos of your

Rangemaster kitchen and tell us in one sentence what

makes Rangemaster the heart of your kitchen? Entries

can be posted on our Facebook page, Instagram or Twit-

ter by tagging @RangemasterUK and using #MyRange-

master. Or, if you prefer, simply send in your entry via

e-mail to marketing@agarangemaster.co.uk.

Rangemaster will feature a number of entries on the

website online gallery and on the Rangemaster Facebook

page, and some kitchens may be selected to be profes-

sionally photographed.

Show off your kitchen with ...

#MyRangemaster

This is

Terms & Conditions

1. This is my Rangemaster is open to residents of UK mainland only, aged 18 years & over. 2. All entries should be submitted to the advertised e-mail address, or Rangemaster UK Facebook, Instagram or Twitter page

using the advertised hashtag & tag. 3. If we would like to professionally photograph your kitchen, you will be contacted via e-mail, Facebook / Twitter message or Instagram comment. 4. We cannot guarantee your

kitchen will be professionally photographed. 4. Any photographs received and professional photographs taken will belong to AGA Rangemaster plc with full usage rights. E&OE.

Simply snap and share a picture of your kitchen and tag #My-

Rangemaster for the chance to win £200 of

Rangemaster cookware. If selected we will also send a photog-

rapher round to professionally photograph you at

home with your range. You might even feature in some

of the UK’s top home interest titles!

Our range cookers are well known for providing the best

possible cooking performance and years of faithful service.

However, a great cooker alone cannot guarantee perfect

results every time. The other vital ingredients are of course

enthusiasm and quality cookware.

We offer cookware to work perfectly with all fuel types

manufactured by Rangemaster, including induction hobs.

You can be assured of functionality with style, as well as the

quality and meticulous attention to detail you expect from

the pioneers of range cooking.

Visit www.rangemastercookshop.co.uk

Search Rangemaster UK

Terms & Conditions Apply

Contents

1. Before You Start... 1

2. Cooker Overview 5

Hotplate Burners 5

Wok Burner 6

The Wok Cradle (optional extra) 7

The Griddle 7

The Grill / Glide-out Grill 8

The Ovens 9

Operating the Ovens 10

Accessories 11

Main Oven Light 11

Storage 11

3. 2 Button - rotary clock 12

4. 3 Button clock 15

5. 6 Button clock 17

6. Cooking Tips 19

7. Cooking Table 20

8. Cleaning your cooker 21

Essential Information 21

Hotplate Burners 21

Grill 22

Glide-out Grill 22

Control Panel and Doors 22

Ovens 23

9. Troubleshooting 25

10. Installation 27

Dear Installer 27

Safety Requirements and Regulations 27

Provision of Ventilation 27

Location of Cooker 28

Positioning The Cooker 29

Moving the Cooker 29

Completing the Move 30

Fitting the Stability Bracket or Chain 30

Repositioning the Cooker Following

Connection

Conversion to Another Gas 31

Levelling the Cooker 31

Fitting the Oven Burner Trim 31

Gas Connection 31

Electrical Connection 32

Final Fitting 33

Final Checks 33

Customer Care 33

11. Conversion to LP Gas 34

Injectors 34

Bypass Screw Adjustment 34

Grill 35

Ovens 35

Pressure Testing 35

12. Circuit Diagram 36

13. Technical Data 37

Hotplate Eciency 38

Oven Data 39

Your cooker should give you many years of trouble-free

cooking if installed and operated correctly. It is important

that you read this section before you start.

Personal Safety

This appliance is for cooking purposes only. It must not be

used for other purposes, for example heating a room. Using

it for any other purpose could invalidate any warranty or

liability claim. Besides invalidating claims this wastes fuel and

may overheat the control knobs.

This appliance is for use in Great Britain and the Republic

of Ireland. It is a Cat II

2H3+

cooker and is set for G20 at

20 mbar. (A conversion kit for LPG is available for the

cooker).

• This appliance can be used by children aged from

8years and above and persons with reduced physical,

sensory or mental capabilities or lack of experience

and knowledge if they have been given supervision or

instruction concerning use of the appliance in a safe

way and understand the hazards involved.

• Children less than 8 years of age should be kept away

unless continuously supervised. Children shall not play

with the appliance. Cleaning and user maintenance

shall not be made by children without supervision.

• The cooker should not be placed on a base.

• This appliance is designed for domestic cooking only.

Use for any other purpose could invalidate any warranty

or liability claim.

• Before operating the ovens please refer to the oven

shelf installation, in the Accessories section.

• The appliance and its accessible parts become hot

during use and will retain heat even after you have

stopped cooking. Care should be taken to avoid

touching heating elements.

• A long term cooking process has to be supervised from

time to time. A short term cooking process has to be

supervised continuously.

• At the risk of fire DO NOT store items on the cooking

surfaces.

• To avoid overheating, DO NOT install the cooker behind

a decorative door.

• Accessible parts will become hot during use and will

retain heat even after you have stopped cooking. Keep

babies and children away from the cooker and never

wear loose-fitting or hanging clothes when using the

appliance.

• DO NOT use a steam cleaner on your cooker.

• Always keep combustible materials, e.g. curtains, and

flammable liquids a safe distance away from the cooker.

• DO NOT spray aerosols in the vicinity of the cooker

while it is on.

Gas Connection Safety

A Gas Safe registered engineer should service the cooker

and only approved spare parts should be used.

The electrical installation must be installed in accordance

with all relevant British Standards/Codes of Practice,

BS 7671. Or with the relevant national and local

regulations and with the local gas and electricity supply

companies’ requirements.

Otherwise, all installations must be in accordance with

the relevant instructions in this booklet.

• If the appliance is connected to a solar or wind

generated electrical supply, there may be a problem

when igniting the oven burners. This issue is not

associated with the appliance but one related to the

household power supply. Therefore any service call

associated with this occurrence will not be covered by

the appliance / manufacturers guarantee.

• This cooker is a Class 2 Subclass 1 appliance.

This appliance can be converted for use on another gas.

• Before installation, make sure that the cooker is suitable

for your gas type and supply voltage. See the data

badge.

• DO NOT use reconditioned or unauthorised gas

controls.

• Disconnect from the electricity and gas supply before

servicing.

• When servicing or replacing gas-carrying components

disconnect from the gas supply before starting

operation. Check the appliance is gas sound after

completion.

• Make sure that the gas supply is turned on and that the

cooker is wired in and switched on.

• In your own interest and that of safety, it is law that all

gas appliances be installed by a qualified person(s).

• An appliance for use on LPG must not be installed in

a room or internal space below ground level, e.g. in a

basement.

This cooker must be installed in accordance with:

• British Standards/Codes of Practice, BS 5440 Part 2

• Natural Gas: BS 6172 and BS 6891

• LP Gas: BS 5482-1 (when the installation is in a

permanent dwelling)

• Gas Safety (Installation and Use) regulations

• Relevant Building/IET regulations

1. Before You Start...

If You Smell Gas

• DO NOT turn electric switches on or off

• DO NOT smoke

• DO NOT use naked flames

• Turn off the gas at the meter or cylinder

• Open doors and windows to get rid of the gas

• Keep people away from the area affected

• Call your gas supplier

• If you are using Natural Gas in the UK, ring the

National Grid on: 0800 111 999

Installation and Maintenance

• It is recommended that this appliance is serviced

annually.

• Before replacing the bulb, turn o the power supply and

make sure that the oven is cool.

• DO NOT use cooking vessels on the hotplate that

overlap the edges.

• Unless specified otherwise in this guide, always allow

the cooker to cool and then switch it off at the mains

before cleaning or carrying out any maintenance work.

• DO NOT use the control knobs to manoeuvre the cooker.

• NEVER operate the cooker with wet hands.

• DO NOT use a towel or other bulky cloth in place of a

glove – it might catch fire if brought into contact with a

hot surface.

• DO NOT use hotplate protectors, foil or hotplate covers

of any description. These may affect the safe use of

your hotplate burners and are potentially hazardous to

health.

• NEVER heat unopened food containers. Pressure build

up may make the containers burst and cause injury.

• DO NOT use unstable saucepans. Always make sure that

you position the handles away from the edge of the

hotplate.

• NEVER leave the hotplate unattended at high heat

settings. Pans boiling over can cause smoking,

and greasy spills may catch on fire. Use a deep fat

thermometer whenever possible to prevent fat

overheating beyond the smoking point.

• Unattended cooking on a hob with fat or oil can be

dangerous and may result in fire.

• NEVER leave a chip pan unattended. Always heat fat

slowly, and watch as it heats. Deep fry pans should be

only one third full of fat.

• NEVER try to move a pan of hot fat, especially a deep

fat fryer. Wait until the fat is cool. Filling the pan too full

of fat can cause spill over when food is added. If you use

a combination of oils or fats in frying, stir them together

before heating, or as the fats melt.

• Foods for frying should be as dry as possible. Frost on

frozen foods or moisture on fresh foods can cause hot

fat to bubble up and over the sides of the pan. Carefully

watch for spills or overheating of foods when frying at

high or medium high temperatures.

• DO NOT use the top of the flue (the slot along the back

of the cooker) for warming plates, dishes, drying tea

towels or softening butter.

• DO NOT use water on grease fires and never pick up

a flaming pan. Turn the controls off and then smother

a flaming pan on a surface unit by covering the pan

completely with a well fitting lid or baking tray. If

available, use a multi-purpose dry chemical or foam-

type fire extinguisher.

• DO NOT modify this appliance. This appliance is not

intended to be operated by means of external timer or

separated remote-control system.

• If flammable materials are stored in the drawer, oven(s)

or grill(s) it may explode and result in fire or property

damage.

Peculiar Smells

When you rst use your cooker it may give o an odour. This

should stop after use.

Before using for the rst time, make sure that all packing

materials have been removed and then, to dispel

manufacturing odours, turn the ovens to 200 °C and run for at

least an hour.

Before using the grill for the rst time you should also turn on

the grill and run for 30 minutes with the grill pan in position,

pushed fully back and the grill door open.

Make sure the room is well ventilated to the outside air

(see ‘Ventilation’ below). People with respiratory or allergy

problems should vacate the area for this brief period.

Ventilation

The use of a cooking appliance results in the production

of heat and moisture in the room in which it is installed.

Therefore, make sure that the kitchen is well ventilated:

keep natural ventilation holes open or install a powered

cookerhood that vents outside. If you have several hotplates/

burners on, or use the cooker for a long time, open a window

or turn on an extractor fan

Oven Care

• When the oven is not in use and before attempting

to clean the cooker always be certain that the control

knobs are in the OFF position.

• Use oven gloves to protect your hand from potential

burns.

• Cooking high moisture content foods can create a

‘steam burst’ when the oven door is opened (Fig. 1.1).

When opening the oven, stand well back and allow any

steam to disperse.

• The inside door face is constructed with toughened

safety glass. Take care NOT to scratch the surface when

cleaning the glass panel.

• Accidental damage may cause the door glass panel to

fracture.

• Keep oven vent ducts unobstructed.

• DO NOT use harsh abrasive cleaners or sharp metal

scrapers to clean the oven door glass since they can

scratch the surface, which may result in shattering of

the glass.

• Make sure the shelves are pushed firmly to the back of the

oven. DO NOT close the door against the oven shelves.

• DO NOT use aluminium foil to cover shelves, linings or

the oven roof.

• When the oven is on, DO NOT leave the oven door open

for longer than necessary, otherwise the control knobs

may become very hot.

• DO NOT use the timed oven if the adjoining oven is

already warm.

• DO NOT place warm food in the oven to be timed.

• DO NOT use a timed oven that is already warm.

• Use dry oven gloves when applicable – using damp

gloves might result in steam burns when you touch a

hot surface.

ArtNo.324-0001 Steam burst

Fig. 1.1

Hob Care

• NEVER allow anyone to climb or stand on the hob.

• DO NOT use the hob surface as a cutting board.

• DO NOT leave utensils, foodstus or combustible items

on the hob when it is not in use (e.g. tea towels, frying

pans containing oil).

• DO NOT place plastic or aluminium foil, or plastic

containers on the hob.

• Always turn the control to the OFF position before

removing a pan.

• Avoid heating an empty pan. Doing so may damage

both the hob and pan.

Grill/Glide-out Grill™ Care

• When using the grill, make sure that the grill pan is

in position and pushed fully in, otherwise the control

knobs may become very hot.

• DO NOT leave the grill on for more than a few moments

without the grill pan underneath it, otherwise the knobs

may become hot.

• NEVER close the grill door when the grill is on.

• Accessible parts may be hot when the grill is in use.

Young children should be kept away.

Cooling Fan

This appliance has a cooling fan, which will operate when the

appliance has been in use for a period of time.

Under certain circumstances, the cooling fan may remain

active when the grill or ovens are switched o. This is normal

and the fan will switch o automatically.

Cooker Care

As steam can condense to water droplets on the cool outer

trim of the oven, it may be necessary during cooking to wipe

away any moisture with a soft cloth. This will also help to

prevent soiling and discolouration of the oven exterior by

cooking vapours.

Cleaning

• Isolate the electricity supply before carrying out any

thorough cleaning. Allow the cooker to cool.

• In the interests of hygiene and safety, the cooker should

be kept clean at all times as a build up in fats and other

food stuff could result in a fire.

• Clean only the parts listed in this guide.

• Clean with caution. If a wet sponge or cloth is used to

wipe spills on a hot surface, be careful to avoid steam

burns. Some cleaners can produce noxious fumes if

applied to a hot surface.

• NEVER use paint solvents, washing soda, caustic

cleaners, biological powders, bleach, chlorine based

bleach cleaners, coarse abrasives or salt.

• DO NOT mix different cleaning products – they may

react together with hazardous results.

• All parts of the cooker can be cleaned with hot soapy

water.

• Take care that no water seeps into the appliance.

• Before you remove any of the grill parts for cleaning,

make sure that they are cool or use oven gloves.

• DO NOT use any abrasive substances on the grill and

grill parts.

• DO NOT put the side runners in a dishwasher.

• DO NOT put the burner heads in a dishwasher.

• NEVER use caustic or abrasive cleaners as these will

damage the surface.

• DO NOT use steel wool, oven cleaning pads or any other

materials that will scratch the surface.

• NEVER store flammable materials in the drawer.

This includes paper, plastic and cloth items, such

as cookbooks, plastic ware and towels, as well as

flammable liquids.

• DO NOT store explosives, such as aerosol cans, on or

near the appliance.

• DO NOT use steel wool, oven cleaning pads, or any

other materials that will scratch the surface.

• DO NOT attempt to disassemble or clean around any

burner while another burner is on, otherwise an electric

shock could result.

ArtNo.210-0012 - 110 Classic induction front view

ºC

The 110 gas cooker (Fig.2.1) has the following features:

A. 6 hotplate burners including a wok burner

B. A control panel

C. A grill / glide-out grill (depending on model)

D. Left-hand oven (timed)

E. Right-hand oven

F. A storage drawer

Hotplate Burners

The drawing by each of the control knobs indicates which

burner that knob controls.

Each burner has a Flame Supervision Device (FSD) that

prevents the ow of gas if the ame goes out.

When the igniter button is pressed in, sparks will be

made at every burner – this is normal. Do not attempt to

disassemble or clean around any burner while another

burner is on, otherwise an electric shock could result.

To light a burner, press the igniter button, and push in and

turn the associated control knob to the high position as

indicated by the large ame symbol (



), (Fig.2.2).

2. Cooker Overview

Fig.2.1

Fig.2.2

ArtNo.311-0002 Pan with rim

ArtNo.311-0001 Right pans gas

Art No. 311-0003 Simmer aids

ArtNo.311-0004 Tipping wok

ArtNo.311-0005 Wok burner & pan support

The igniter should spark and light the gas. Keep holding the

knob pressed in to let the gas through to the burner for about

ten seconds.

If, when you let go of the control knob, the burner goes out,

then the FSD has not been bypassed. Turn the control knob

to the OFF position and wait for one minute before you try

again, this time making sure to hold in the control knob for

slightly longer.

Adjust the ame height to suit by turning the knob counter-

clockwise (

Fig.2.3).

If a burner ame goes out, turn o the control knob and

leave it for one minute before relighting it.

Make sure that the ames are under the pans. Using a lid will

help the contents boil more quickly (

Fig.2.4).

Large pans should be spaced well apart.

Pans and kettles with concave bases or down-turned base

rims should not be used (

Fig.2.5).

Simmering aids, such as asbestos or mesh mats, are NOT

recommended (

Fig.2.6). They will reduce burner performance

and could damage the pan supports.

You should also avoid using unstable and misshapen pans

that may tilt easily, and pans with a very small base diameter,

e.g. milk pans, single egg poachers (

Fig.2.7).

The minimum recommended pan diameter is 120 mm. The

maximum allowable pan base diameter is 260 mm.

DO NOT use cooking vessels on the hotplate that overlap the

edges.

Wok Burner

The wok burner is designed to provide even heat over a large

area. It is ideal for large pans and stir-frying (Fig.2.8).

For heating smaller pans, the aforementioned hotplate

burners may be more ecient.

You should wipe the enamel top surface of the cooker around

the hotplate burners as soon as possible after spills occur. Try

to wipe them o while the enamel is still warm.

Note:

The use of aluminium pans may cause metallic marking

of the pan supports. This does not aect the durability of the

enamel and may be cleaned o with an appropriate metal

cleaner.

Fig.2.3

Fig.2.6

Fig.2.4

Fig.2.7

Fig.2.5

Fig.2.8

ArtNo.110-0013 Positioning the griddle on hotplate (right)

ArtNo.110-0014 Positioning the griddle on hotplate (wrong)

ArtNo.311-0006 Correct wok sizes

ArtNo.311-0007 Wok stand close-up

ArtNo.311-0009 Oil on griddle

ArtNo.311-0008 Griddle positioning

The Wok Cradle (optional extra)

The wok cradle is designed to t a Professional 35 cm wok. If

you use a dierent wok, make sure that it ts the cradle. Woks

vary very widely in size and shape. It is important that the

wok sits down on the pan support – however, if it is too small,

the cradle will not support the wok properly (Fig.2.9).

The cradle should be used on the wok burner only. When you

t the cradle (

Fig.2.10), check that it is properly located on a

pan support and the wok is sitting level in the cradle.

The cradle will get very hot in use – allow plenty of time for it

to cool before you pick it up.

The Griddle

The griddle ts the left-hand pan support, front to back

(Fig.2.11). It is designed for cooking food on directly. DO NOT

use pans of any kind on it. The griddle surface is non-stick and

metal cooking utensils (e.g. spatulas) will damage the surface.

Use heat resistant plastic or wooden utensils.



DO NOT put it crossways – it will not t properly and

will be unstable (Fig.2.12).



Do not put it on any other burner – it is not designed

to t in any of the other pan supports.

Position the griddle over the hotplate burners resting on the

pan support. Check that it is securely located.

The griddle can be lightly brushed with cooking oil before

use (

Fig.2.13). Light the hotplate burners. Adjust the ame

heights to suit.

Preheat the griddle for a maximum of 5 minutes before

adding food. Leaving it longer may cause damage. Turn the

control knobs towards the low position, marked with the

small ame symbol, to reduce the burner ames.



Always leave space around the griddle for the gases

to escape.



NEVER t two griddles side by side (Fig.2.14).

After cooking, allow the griddle to cool before cleaning.

Fig.2.9

Fig.2.10

Fig.2.11

Fig.2.12

Fig.2.13

Fig.2.14

The Grill / Glide-out Grill



This appliance is for cooking puposes only. It must

not be used for other purposes, for example room

heating.



Accessible parts may be hot when the grill is in use.

Young children should be kept away.

Open the door and pull the grill pan carriage forward using

the handle (

Fig.2.15 or Fig.2.16).

The burner does not glow red when in use; food cooks from

the heat of the ame. The rst time you light the grill there

may be a little smoke given o – this is perfectly normal.

Operation

The grill has a special safety device which stops the ow of

gas if the ame goes out.

To turn on the grill, press the igniter button and then press

and hold the grill control knob to the large ame symbol (



)

for about 10 seconds (Fig.2.17).

To heat the right-hand half, turn the knob counter-clockwise.

The neon indicator light by the grill control will come on.

If, when you release the control knob the burner goes out,

then the safety device has not held in. Turn the grill control

knob to ‘0’ and wait for one minute. Repeat the operation but

hold the button and control knob in for slightly longer.

The low position, marked with the small ame symbol, is

beyond high, not between high and o (

Fig.2.18).

For best results, slide the grill pan back into the grill chamber

and preheat the appropriate part(s) of the grill for two

minutes. The grill trivet can be removed and the food placed

on it while you are waiting for the grill to preheat.



DO NOT leave the grill on for more than a few

moments without the grill pan underneath it,

otherwise the knobs may become hot.

Once the grill has preheated, slide the grill pan out again.

With the trivet back in place with the food on it, slide the pan

back into the grill chamber. Make sure that it is pushed right

in.

The grill pan trivet can be turned over to give two grilling

positions (

Fig.2.19).

Do not leave the grill on for more than a few moments,

without the grill pan underneath it.



Never close the grill door when the grill is on.

ArtNo.331-0002 Grill pan high/low position

ArtNo.331-0001Grill pan pulled forwards

ArtNo.330-0003 - Grill pan w handle pulled forwards

Fig.2.15

Fig.2.16

Fig.2.17

Fig.2.18

Fig.2.19

Kitchener

Classic

Professional +

The Ovens

The clock must be set to the time of day before the ovens

will work. See the following section on ‘The Clock’ for

instructions on setting the time of day.

References to ‘left-hand’ and ‘right-hand’ ovens apply as viewed

from the front of the appliance.

Both ovens are gas ovens.

Note: Please remember that all cookers vary so temperatures

in your new ovens may dier to those in your previous

cooker.

The Gas Oven

The gas oven uses our special ‘Heatow’ system.

As the oven burner is not hidden under the oven base you

will see the burner ames at the back of the oven (

Fig.2.20).

This is perfectly normal.

The oven is protected by a safety cut-o, which reduces

the supply of gas to the oven if the ames go out, e.g. and

interruption to the mains supply. Initially the gas will burn

with a small ame but after approximately one minute the

ame will become larger indicating that the oven is full on.

Dishes cooking on the central shelf will cook at the gas mark

indicated on the knob (

Fig.2.21).

Dishes placed above the central position will cook at

approximately one gas mark higher; dishes placed below will

cook at approximately one gas mark lower (

Fig.2.22).

You can therefore cook dishes requiring dierent gas marks at

the same time.

‘S’ (Slow) Cooking

The ‘S’ setting (Fig.2.23) is a very low temperature for slow

cooking, overnight or while you are out or at work. The ‘S’

setting can also be used for keeping food warm.

You can cook on ‘S’ throughout, or use a 30 minute ‘boost’

period at gas mark 6 and then ‘S’ cook.

When roasting joints, poultry or pot roasting, always cook at

gas mark 6 for 30 minutes at the beginning of the cooking

period.

You can ‘S’ cook for periods of 6 to 12 hours. This technique

is particularly useful if you want to cook a dish overnight or

while you are out at work during the day.



Frozen foods must be thoroughly thawed out before

‘S’ cooking.



Whole poultry should not be cooked on ‘S’. Chicken

casseroles are ne.

Casseroles must be brought to boiling point on the hotplate

immediately before ‘S’ cooking.

DO NOT stu poultry and rolled joints before cooking. The

stung should be cooked separately. Poultry and pork

should be cooked in the top half of the oven, and other meats

not lower than shelf position 4.

ArtNo.323-0003 Bray gas oven burner flame

ArtNo.323-0004 Gas ovens shelves 1

Fig.2.20

Fig.2.21

Fig.2.22

Fig.2.23

A roasting joint should be covered with cooking foil or with a

roasting bag to reduce shrinkage and retain juices.

Should further browning be necessary, uncover the meat and

increase the temperature to gas mark 4 for a short period.

Cut root vegetables into small pieces unless cooking whole,

e.g. jacket potatoes.

Cover dishes tightly with a lid or foil to prevent evaporation

and transfer of avour.

Once the oven has been loaded and the ‘S’ setting is in

operation resist the temptation to open the oven door. Heat

will be lost and the cooking time extended.

A meat thermometer is recommended for checking that

a joint or poultry is suciently cooked. Insert the probe

through the thickest part of the meat. For the expected

temperatures see Table 2-1.

Operating the Ovens

Push in and turn the knob controlling the oven to gas mark 9

(Fig.2.24). The oven will light automatically.

Turn the oven knob to the desired gas mark (

Fig.2.25).

Meat Temperature

Beef Rare 60 °C / 140 °F

Medium 71 °C / 160 °F

Well done 77 °C / 170 °F

Lamb 82° C / 180 °F

Pork Fresh 88° C / 190 °F

Cured 77° C / 170 °F

Poultry 90° C / 195 °F

Veal 77° C / 170 °F

Table 2-1

Fig.2.24

Fig.2.25

ArtNo.320-0013 Removing the shelf 3

ArtNo.320-0014 Handyrack on LH door

ArtNo.320-0015

Fitting the Handyack 1

ArtNo.320-0016

Fitting the handyrack 2

ArtNo.320-0011 Removing the shelf 1

ArtNo.320-0012 Removing the shelf 2

Accessories

Oven Shelves

The cooker is supplied with 4 at shelves (Fig.2.26).

The oven shelves can be easily removed and retted.

Pull the shelf forward until the back of the shelf is stopped by

the shelf stop bumps in the oven sides (

Fig.2.27).

Lift up the front of the shelf so the back of the shelf will pass

under the shelf stop and then pull the shelf forward

(

Fig.2.28).

To ret the shelf, line up the shelf with a groove in the oven

side and push the shelf back until the ends hit the shelf stop.

Lift up the front so the shelf ends clear the shelf stops, and

then lower the front so that the shelf is level and push it fully

back (

Fig.2.29).

The Handyrack (Left-hand Oven)

The Handyrack (Fig.2.30) ts to the left-hand oven door

only. Food cooking on it is easy to attend to, because it is

accessible when the door is open.

The maximum weight that can be held by the Handyrack

is 5.5 kg (12 lb). It should only be used with the supplied

roasting tin, which is designed to t the Handyrack. Any other

vessel could be unstable.

It can be tted at two dierent heights. One of the oven

shelves must be removed and the other positioned to suit.

When the Handyrack is used in its highest position, other

dishes can be cooked on the bottom shelf position or base of

the oven.

When the Handyrack is used in its lowest position, other

dishes can be cooked on the second shelf position or base of

the oven.

To t the Handyrack, locate one side of it on the door bracket

(

Fig.2.31).

Then spring the other side out to clip it onto the other

bracket (

Fig.2.32).

Main Oven Light

Press the appropriate button to turn the light on (Fig.2.33).

If the oven light fails, turn o the power supply before

changing the bulb. See the ‘Troubleshooting’ section for

details on how to change the bulb.

Storage

The bottom drawer is for storing oven trays and other

cooking utensils. It can get very warm, so do not store

anything in it that may melt or catch re.

The drawer can be removed completely by pulling it right out

and up (

Fig.2.34).

Shelf guard

Front

Fig.2.26

Fig.2.27

Fig.2.28

Fig.2.29

Fig.2.32

Fig.2.30

Fig.2.31

ArtNo.320-0026

- Oven light

ArtNo.340-0002 110 removing the drawer

Fig.2.33

Fig.2.34

ArtNo.300-0005 2BC

minute minder setting

A B

ArtNo.300-0005 2BC

minute minder setting

A B

C D

The clock must be set to the time of day before the oven

will work.

Setting the Clock

1. Once the cooker is connected and switched on, the

display will start to ash.

2. To set the time, turn the Timer (A) knob to the Clock

centre dot will ash indicating the time can be set. Turn

the Adjusting (B) knob either clockwise or counter-

clockwise (Fig. 3.1) to set the time.

3. Once you have set the time, allow the centre dot to stop

ashing, the time is now set.

Setting the minute minder

A Minute Minder (E) is a feature that can be set for a number

of minutes and sounds an alarm once the specied amount

of time has elapsed.

1. Turn the Timer (A) knob to the Minute Minder (E)

setting – it should click into position (Fig. 3.2).

2. Turn the Adjusting (B) knob to set the amount of time

required. Minimum time 1 minute (Fig. 3.3).

3. Turn the Timer (A) knob back to the Manual (D) setting

to see the current time and the ‘Bell’ symbol on the

display.

Cancel the timer alarm

Once the specied time has elapsed it will emit an alarm.

There are two ways to cancel the alarm:

1. Turn the Adjusting (B) knob counter-clockwise or

clockwise (Fig. 3.4).

2. Turn the Timer (A) knob to the Clock (C) or the Minute

Minder (E) setting, and back to the Manual (D) mode,

to return to normal cooking (Fig. 3.4).

NOTE

If the alarm is not manually switched o it will stop after

approximately 2 minutes.

When the Minute Minder is active the clock will not dim

between the hours of 10 pm and 6 am

ArtNo.301-0007 2BC

Stopping the oven 1

A B

Fig. 3.1

A – Timer knob, B – Adjusting knob

Fig. 3.2

Fig. 3.3

Fig. 3.4

3. 2 Button - rotary clock

A B

ArtNo.311-0004 RShaw

2BC stoppingOven 1

A B

To stop the oven at a speciﬁc time of day

You have set the required temperature and function mode

and you would like the oven to automatically stop.

TOP TIP

Make a note of the current time so you do not forget.

1. Turn the Timer (A) knob to the Stop Time (G) setting.

‘AUTO’ will show in the display (Fig. 3.5).

2. Turn the Adjusting (B) knob to the amount of cooking

time required. The display will show the current time

plus the additional cooking time you have set (Fig. 3.6).

3. Turn the Timer (A) knob to the Auto (H) setting. The

display will show the current time, the cooking symbol

and the word ‘AUTO’ (Fig. 3.7).

4. Once the specied time has elapsed it will emit an alarm

and the oven will stop working. The cook pot symbol on

the display will disappear and the word ‘AUTO’ will ash

(Fig. 3.8).

5. When you return, turn the Timer (A) knob to the

Manual (D) setting to return to manual cooking (Fig.

3.8).

TOP TIP

You can check how much time you have left, to the

programmed stop time, by turning Timer (A) from Auto

(H) to Stop Time (G) and back to Auto (H).

A B

Fig. 3.5

Fig. 3.6

Fig. 3.7

Fig. 3.8

A B

To start and stop the oven automatically

The timer allows you to automatically start and stop by a

combination of the length of the cooking time and the stop

time. Giving you the exibility to cook casseroles etc while

you are out. You cannot set the actual start time.

1. Turn the Timer (A) knob to the Cook Time (F) setting.

Turn the Adjusting (B) knob clockwise to set the length

of the cooking time required (Fig. 3.9).

2. Turn the Timer (A) knob to the Stop Time (G) setting

(Fig. 3.10). The display will show the current time of day

plus the ‘cook time’ you just set.

3. Turn the Adjusting (B) knob to set the time of day you

want the oven to stop cooking (Fig. 3.11).

4. Set the oven to the required cooking temperature and

function mode.

5. Turn the Timer (A) knob to the Auto (H) setting

(Fig. 3.12). If the display shows the current time and the

word ‘AUTO’ the oven is set to turn on and o.

6. When the program starts the oven, the cooking symbol

will appear on the display. Once the specied time has

elapsed it will emit an alarm and the Multifunction Oven

will stop working. The ‘Cooking’ symbol on the display

will disappear and the word ‘AUTO’ will ash (Fig. 3.13).

7. Once the specied time has elapsed it will emit an

alarm. There are two ways to cancel the alarm, refer to

“Cancel the timer alarm” on page 12

• The ‘cook period’, which is the length of time you want

the oven to cook for.

• The ‘stop time’, which is the time of day you want the

oven to stop cooking.

Reset to manual cooking

To cancel any automatic settings turn the Timer (A) knob to

the Manual (D) setting and release (Fig. 3.14).

NOTE: Whilst this operation cancels all automatic program

settings, it does not cancel the minute minder.

Beeper tone adjustment

The beeper tone can be adjusted to three dierent levels.

Turn the Timer (A) knob to the Clock (C) setting. Turn the

Adjusting (B) knob counter clockwise until the tone bars are

displayed (Fig. 3.15).

To adjust the tone of the alarm, release the Adjusting (B)

knob and then turn counter clockwise again (Fig. 3.16). The

tone of the alarm will change. Repeat these steps until the

desired alarm tone is set.

A B

Fig. 3.9

Fig. 3.10

Fig. 3.11

A B

Fig. 3.12

Fig. 3.13

Fig. 3.14

Fig. 3.15 Fig. 3.16

4. 3 Button clock

Using the clock

You can use the clock to turn the programmable oven on and

o. The clock must be set to the time of day before the

oven will work.

NOTE: When using the timer functions, rst set the clock as

required before setting the oven temperature.

The oven can be switched on when the cook symbol [

] is

displayed.

Setting the clock

1. The LCD clock is shown in (Fig. 4.1). Once the cooker is

connected and switched on, the display ashes (00.00 )

and the time starts from (00.00 ).

2. To set the clock press the [+] and [-] buttons

simultaneously, the point between hours and minutes

will start to ash for 5 seconds. Whilst the point is

ashing press either the [+] or [-] button to set the

correct time.

IMPORTANT: The timed oven will not operate unless the

clock has been set.

Program selection - Setting the minute minder

The minute minder [

] provides the ability to set a

countdown from 00:01h to 23:59h, at the end of which an

alarm will sound.

1. Press the mode [M] button once (Fig. 4.2). The bell

symbol [ ] will ash on the display. Select the desired

countdown from 00:01h to 23:59h using the [+] button

(Fig. 4.3). The countdown will automatically begin and

the [ ] symbol will show in the display.

2. Once the specied time has elapsed an alarm will

sound.

3. To stop the alarm press any button.

Re-set the minute minder

To re-set the minute minder, rst select the minute minder

program by pressing the mode [M] button. Then press the

[+] and [-] buttons simultaneously.

• The ‘cook period’, which is the length of time you want

the oven to cook for (dur).

• The ‘stop time’, which is the time of day you want the

oven to stop cooking (End).

To stop the programmable oven at a speciﬁc time of day

1. Press the mode [M] button 3 times, until the display

ashes ‘End’ (Fig. 4.4).

2. Select the ‘stop time’ using the [+] or [-] buttons. The

display will show the current time along with the ‘AUTO’

and Cooking [ ] symbols (Fig. 4.5).

ArtNo.306-0001 - 3-button clock

Fig. 4.1

Fig. 4.2

Fig. 4.3

Fig. 4.4

Fig. 4.5

Fig. 4.6

3. When the ‘stop time’ is reached an alarm will sound and

the oven will stop working. The word ‘AUTO’ will ash on

the display (Fig. 4.6).

4. Press any button to stop the alarm and return to

manual cooking. If the alarm is not stopped, it will stop

automatically after 7 minutes.

To start and then stop the programmable oven

Set the programmable oven to automatically start and stop

using a combination of the ‘cook period’ and ‘stop time’.

You cannot set a start time directly – this is set automatically

by a combination of the ‘cook period’ and ‘stop time’.

1. Press the mode [M] button until the display ashes ‘dur’

(Fig. 4.7). Then set the ‘cook period’ using the [+] or [-]

buttons.

2. Press the mode [M] button until the display ashes ‘End’

(Fig. 4.8). Then set the ‘stop time’ using the [+] or [-]

buttons. Current time will be displayed along with the

word ‘AUTO’ (Fig. 4.9).

3. Set the oven to the required cooking temperature.

4. During the ‘cook period’ the cook symbol [ ] is

illuminated in the display.

5. When cooking is nished an alarm will sound. Press any

button to stop the alarm and return to manual cooking.

If the alarm is not stopped, it will stop automatically

after 7 minutes.

AUTO is showing, but you want to revert to manual

cooking

You can cancel any automatic settings by pressing the [+] and

[-] buttons simultaneously.

Changing the frequency of the alarm

It is possible to change the alarm frequency.

1. Press the the [+] and [-] buttons simultaneously, then

the mode [M] button. The display will show ‘ton1,2 or 3’

(Fig. 4.10).

2. To select the tone press the [-] button until desired tone

is reached (Fig. 4.11).

ArtNo.306-0001 - 3-button clock

Fig. 4.7

Fig. 4.8

Fig. 4.9

Fig. 4.10

Fig. 4.11

Page is loading ...

Rangemaster PROP110NGFCR/C User manual

Brand: Rangemaster

Model: PROP110NGFCR/C

Category: Cookers

Type: User manual

This manual is also suitable for

Professional 110 Gas Range Cooker

Download PDF

report

Rangemaster PROP110NGFCR/C User manual

This manual is also suitable for

Rangemaster PROP110NGFCR/C User manual

Related papers

Other documents