MANUZOID
Explore
Explore
Bookmarks
Siemens
SK76M530AU/11
Siemens SK76M530AU/11 Owner's manual
Type
Owner's manual
Brand
Siemens
Size
2.35 MB
Pages
1
Language
English
View document
Siemens SK76M530AU/11 User manual
Type
User manual
Brand
Siemens
Size
942.92 KB
Category
Dishwashers
Pages
36
Language
English
Table of contents
Intended use
2
( Safety instructions
3
Safety instructions
3
Before you switch ON the appliance
3
Delivery
3
1. Check the packaging and dishwasher immediately for damage caused in transit. Do not switch on a damaged appliance, but contact your supplier.
3
2. Please dispose of the packaging material in an environmentally friendly manner.
3
3. Do not let children play with packaging and its parts. There is a risk of suffocation from collapsible boxes and film.
3
Installation
4
In daily use
5
Childproof lock (door lock)Door lock *
5
Childproof lock (button lock)Button lock
5
1. Start the required programme.
5
2. Hold down the button + for approx. 4 sec. until this ’– is indicated on the digital display.
5
Damage
6
Disposal
6
1. Make redundant appliances unusable to prevent subsequent accidents.
6
2. Dispose of the appliance in a n environmentally friendly manner.
6
m Warning
6
Risk of injury!
6
m Warning
6
Risk of explosion!
6
m Warning
6
Risk of scalding!
6
m Warning
7
Risks to children!
7
7 Protection of the environment
7
Protection of the environment
7
Packaging
7
Old appliances
7
* Getting to know your appliance
8
Getting to know your appliance
8
Control panel
8
Appliance interior
8
, Rinse aid
8
Rinse aid
8
1. Open the dispenser 1B by pressing and lifting the plate on the cover.
8
2. Carefully pour rinse aid up to the max. mark in the filler opening.
8
3. Close cover until it clicks shut.
9
4. To prevent excessive foam formation during the next rinse cycle, remove any rinse aid which has run over with a cloth.
9
Setting amount of rinse aid
9
1. Close the door.
9
2. Switch on ON/OFF switch (.
9
3. Hold down programme button # and press START button H until š:‹.... is indicated on the digital display.
9
4. Release both buttons.
9
5. Press programme button # until the factory set value §:‹… is indicated on the digital display `.
9
To change the setting:
9
1. Press programme button 3.
9
2. Press START button H.
9
Switching off rinse aid refill indicator
9
- Utensils
10
Utensils
10
Not suitable
10
Glass and utensil damage
10
Loading the dishwasher
10
1. Remove large food remnants. It is not necessary to prerinse utensils under running water.
10
2. Place the utensils so that
10
Unloading the dishwasher
10
Note
10
BasketBasket 1:
11
Cutlery basket
11
Folding spikesFolding spikes *
11
Height of utensils
11
. Detergent
12
Detergent
12
Note
12
m Warning
12
Adding detergent
12
1. If the detergent dispenser 1J is still closed, press the lock 1R to open the detergent dispenser.
12
2. Close the cover on the detergent dispenser by sliding it up until the lock engages without difficulty.
12
Tip
13
Combination detergent
13
Notes
13
Overview of programmes
14
The max. possible number of programmes is illustrated in this overview. The corresponding programmes for your appliance can be found on the fascia. The programme data has been measured in the laboratory according to AS/NSZ 2007.
14
Type of utensils and soiling
14
Programm
14
Programme data
14
1.) Duration: hs/ mins
14
2.) Energy consumption in kWh
14
3.) Water consumption in litres
14
4.) With Aquasensor
14
Possible additional options
14
Programme sequence
14
Programme selection
15
Information for test institutes
15
0 Additional options
16
Additional options
16
Express Wash/ Speed Perfect (VarioSpeed)Ÿ Express Wash/ Speed Perfect/ (VarioSpeed) *
16
· Hygiene *Hygiene
16
Ï Intensive zone *Intensive zone
16
¿ Extra drying *Extra drying
16
1 Operating the appliance
16
Operating the appliance
16
Aqua sensorAqua sensor *
16
Switching on the appliance
16
1. Turn on the tap fully.
16
2. Switch on ON/OFF switch (.
16
3. Press the START button H.
16
Remaining running time display
17
Timer programmingTimer programming *
17
1. Close the door.
17
2. Switch on ON/OFF switch (.
17
3. Press button 8 + until the digital display ` jumps to œ:‹‚.
17
4. Press 8 + or – button until the displayed time corresponds with your requirements.
17
5. Press START button H, timer programming is activated.
17
6. To delete timer programming, press the 8 + or – button until ` œ:‹‹ is indicated on the digital display.
17
End of programme
17
Switching off automatically after the end of the programme *Switching off automatically after the end of the programme
17
1. Close the door.
17
2. Switch on ON/OFF switch (.
17
3. Hold down programme button # and press START button H until š:‹... is indicated on the digital display.
17
4. Release both buttons.
17
5. Press programme button # until the factory set value ˜:‹‚ is indicated on the digital display `.
17
To change the setting:
17
1. Press programme button 3.
17
2. Press START button H.
17
Switching off the appliance
18
1. Switch off ON/OFF switch (.
18
2. Turn off the tap (not applicable if Aqua-Stop fitted).
18
3. Open the door.
18
4. Remove the utensils when they have cooled down.
18
Note
18
Interrupting the programme
18
1. Switch off ON/OFF switch (.
18
2. To continue the programme, switch on the ON/OFF switch ( again.
18
Terminating the programmeTerminating the programme (Reset)
18
1. Press START button H for approx. 3 sec.
18
2. The programme sequence lasts approx. 1 min. On the digital display ` is indicated ‹:‹‹.
18
3. Switch off ON/OFF switch (.
18
Changing the programme
18
Intensive drying
18
1. Close the door.
18
2. Switch on ON/OFF switch (.
18
3. Hold down programme button # and press START button H until the digital display ` š:‹... is indicated.
18
4. Release both buttons.
18
To change the setting:
18
1. Press the button 3 to switch the Intensive drying on š:‹‚ or off š:‹‹.
18
2. Press START button H.
18
2 Cleaning and maintenance
19
Cleaning and maintenance
19
Overall condition of the machine
19
m Warning
19
Health hazard
19
Rinse aid
19
Filters
20
1. After each washing cycle check the filters for residue.
20
2. Unscrew filter cylinder as illustrated and take out filter system.
20
3. Remove any residue and clean filters under running water.
20
4. Re-install filter system in reverse sequence and ensure that the arrow marks are opposite each other after closing the filter system.
20
Spray arm
20
1. Check outlet nozzles on the spray arm for blockages.
20
2. Remove the spray arm upwards.
20
3. Clean the spray arm under running water.
20
4. Lock the spray arm into position.
20
3 Fault, what to do?
21
Fault, what to do?
21
Note
21
m Warning
21
Waste water pump
21
m Warning
21
Risk of cuts!
21
1. First disconnect the appliance from the power supply.
21
2. Remove the filters 1*.
21
3. Scoop out water, use a sponge if required.
21
4. Loosen screws on the pump cover (Torx T 20) and pull off.
21
5. Check inner compartment and remove any foreign objects.
21
6. Place pump cover in the original position, press down and screw tight.
21
7. Install filters.
21
Fault table
22
Fault
22
Cause
22
Remedial action
22
4 Customer service
29
Customer service
29
5 Installation and connection
29
Installation and connection
29
1. Checking appliance on delivery
29
2. Installing the appliance
29
3. Waste water connection
29
4. Drinking water connection
29
5. Electrical connection
29
Product package
29
Safety instructions
29
Delivery
30
Technical specifications
30
Installation
30
Waste-water connection
30
1. The required work sequence can be found in the installation instructions. If required, fit a siphon with an drainage connection.
30
2. Connect the waste-water hose to the drainage connection of the siphon with the enclosed parts.
30
Drinking water connection
31
1. Fasten the drinking water connection to the tap according to the installation instructions using the enclosed parts.
31
2. When replacing the appliance, always use a new water supply hose.
31
Electrical connection
31
Removing the appliance
32
1. Disconnect the appliance from the power supply.
32
2. Turn off the water supply.
32
3. Undo the waste water and drinking water connection.
32
4. Pull out the appliance, carefully pulling the hose behind.
32
Transportation
32
Drain the appliance according to the following steps:
32
1. Turn on the tap.
32
2. Close the door.
32
3. Switch on ON/OFF switch (.
32
4. Select programme with the highest temperature.
32
5. Press START button H.
32
6. After approx. 4 minutes press the START button H until ‹:‹‚ is indicated on the digital display.
32
7. Switch off ON/OFF switch (.
32
8. Turn off the tap, disconnect supply hose and drain water.
32
Protection against frostProtection against frost (Emptying the appliance)
32
View document