MANUZOID
Explore
Explore
Bookmarks
Bosch
SBE88TD02E/11
Bosch SBE88TD02E/11 User manual
Type
User manual
Brand
Bosch
Size
3.12 MB
Category
Dishwashers
Pages
52
Language
English
Table of contents
Table of contents
3
en Instruction manual
3
8 Intended use 5
3
( Safety instructions 5
3
7 Environmental protection 10
3
* Getting to know your appliance 10
3
+ Water softening system / special salt 15
3
, Rinse aid 16
3
- Utensils 18
3
. Detergent 24
3
/ Overview of programmes 27
3
0 Additional functions 29
3
1 Operating the appliance 30
4
2 Cleaning and maintenance 35
4
3 Fault, what to do? 37
4
4 Customer service 48
4
5 Installation and connection 48
4
8 Intended use
5
Intended use
5
( Safety instructions
5
Safety instructions
5
Before you switch ON the appliance
5
Delivery
5
1. Check the packaging and dishwasher immediately for damage caused in transit. Do not switch on a damaged appliance, but contact your supplier.
5
2. Please dispose of the packaging material in an environmentally friendly manner.
5
3. Do not let children play with packaging and its parts. There is a risk of suffocation from collapsible boxes and film.
5
Installation
6
In daily use
7
Damage
7
Disposal
7
1. Make redundant appliances unusable to prevent subsequent accidents.
7
2. Dispose of the appliance in an environmentally friendly manner.
7
: Warning
7
Risk of injury!
7
: Warning
8
Risk of explosion!
8
: Warning
8
Risk of scalding!
8
: Warning
8
Risk to children!
8
Childproof lock (door lock) *
8
Door lock
8
: Warning
8
Risk of suffocation!
8
Activate the child-proof lock (door lock) as follows:
9
1. Pull the catch of the child-proof lock towards yourself (1).
9
2. Close the door (2).
9
Open the door with activated child-proof lock (door lock) as follows:
9
1. Press the catch of the child-proof lock to the right (1).
9
2. Open the door (2).
9
Deactivate the child-proof lock (door lock) as follows:
9
1. Press the catch of the child-proof lock to the right (1).
9
2. Press the catch of the child-proof lock backwards (2).
9
7 Environmental protection
10
Environmental protection
10
Packaging
10
Old appliances
10
* Getting to know your appliance
10
Getting to know your appliance
10
Automatic door opening
10
Control panel
10
Appliance interior
11
Info button {
11
Info button
11
1. Press the Info button { 8.
11
2. Press the programme button.
11
3. To leave, press Info button { 8.
11
Time setting
11
Time setting
11
Set the time as follows:
11
1. Open the door.
11
2. Switch on ON/OFF switch (.
11
3. Press Info button { 8 for 3 seconds until the following text is indicated on the display window at the top @:
11
4. Keep pressing button > )* until the time setting is indicated on the display window at the top @.
11
5. Make the setting with setting buttons + - X. If the selection buttons + - X are held down, the set values are changed in 10-minute steps.
11
6. Press and hold the Info button { 8 for 3 seconds.
11
Note:
11
Switching on the appliance for the first time
12
Change the setting as follows:
12
1. Keep pressing button > )* until the required setting is displayed.
12
2. Make the setting with setting buttons + - X.
12
3. Press and hold the Info button { 8 for 3 seconds.
12
Settings Switching on the appliance for the first time
12
Factory setting
12
Infotext by pressing Info button {
12
--------
12
Settings
13
Change the setting as follows:
13
1. Open the door.
13
2. Switch on ON/OFF switch (.
13
3. Press Info button { 8 for 3 seconds until the following text is indicated on the display window at the top @:
13
4. Keep pressing button > )* until the required setting is displayed.
13
5. Make the setting with setting buttons + - X.
13
6. Press and hold the Info button { 8 for 3 seconds.
13
Note:
13
Setting
13
Factory setting
13
Infotext by pressing Info button {
13
--------
14
+ Water softening system / special salt
15
Water softening system/special salt
15
Water hardness table
15
Adjusting the water softening system
15
Set the softening system as follows:
15
1. Ask your local water utility company for the water hardness value of the tap water.
15
2. Required setting can be found in the water hardness table.
15
3. Open the door.
15
4. Switch on ON/OFF switch (.
15
5. Press Info button { 8 for 3 seconds until the following text is indicated on the display window at the top @:
15
6. Keep pressing button > )* until the water hardness is indicated on the display window at the top @.
15
7. Make the setting with setting buttons + - X.
15
8. Press and hold the Info button { 8 for 3 seconds.
15
Using special salt
15
Caution!
15
Top up the salt as follows:
16
1. Undo the screw plug on the dispenser 1b.
16
2. Fill the dispenser with water (required only when switching on the appliance for the first time).
16
3. Add salt as illustrated (do not use table salt or tablets).
16
Using detergents with salt component
16
Detergent with a salt component
16
Switching off low salt indicator / water softening system
16
Switching off water softening system
16
, Rinse aid
16
Rinse aid
16
Top up the rinse-aid as follows:
17
1. Open dispenser 92; press lug on the lid (1) and lift (2).
17
2. Add rinse-aid up to the max. mark.
17
3. Close the lid.
17
4. Remove overflowed rinse aid with a cloth.
17
Setting amount of rinse aid
17
Set the amount of rinse aid as follows:
17
1. Open the door.
17
2. Switch on ON/OFF switch (.
17
3. Press Info button { 8 for 3 seconds until the following text is indicated on the display window at the top @:
17
4. Keep pressing button > )* until the rinse aid dispenser is indicated on the display window at the top @.
17
5. Make the setting with setting buttons + - X.
17
6. Press and hold the Info button { 8 for 3 seconds.
17
Switching off rinse aid refill indicator
17
- Utensils
18
Utensils
18
Not suitable
18
Glass and utensil damage
18
Causes:
18
Recommendation:
18
Loading the dishwasher
18
1. Remove large food remnants. It is not necessary to prerinse utensils under running water.
18
2. Place the utensils so that
18
Upper basket
18
Note:
19
Lower basket
19
Tip:
19
Tip:
19
Cutlery basket *
19
Cutlery basket
19
Cutlery drawer *
19
Cutlery drawer
19
Etagere *
20
Etagere
20
Adjust the height of the etagere as follows:
20
1. Position the etagere vertically and pull upwards.
20
2. Push etagere at a slight angle downwards to the required height (1, 2, or 3).
20
3. Engage etagere.
20
Folding spikes *
21
Folding spikes
21
Fold down the spikes as follows:
21
1. Press lever forwards (1).
21
2. Fold down spikes (2).
21
Small items holder *
21
Small items holder
21
Knife rack *
21
Knife rack
21
Baking sheet spray head *
22
Baking sheet spray head
22
Insert the spray head as follows:
22
1. Remove upper basket 12.
22
2. Insert spray head as illustrated and turn to the right.
22
Note:
22
Unloading the dishwasher
22
Tip:
22
Note:
22
Adjusting the height of the basket *
23
Adjusting the height of the basket
23
Appliance height 81.5 cm
23
With cutlery basket
23
22 cm
23
31 cm
23
24.5 cm
23
27.5 cm
23
27 cm
23
25 cm
23
With cutlery drawer
23
16 cm
23
31 cm
23
18.5 cm
23
27.5 cm
23
21 cm
23
25 cm
23
Appliance height 86.5 cm
23
With cutlery basket
23
24 cm
23
34 cm
23
26.5 cm
23
30.5 cm
23
29 cm
23
28 cm
23
With cutlery drawer
23
18 cm
23
34 cm
23
20.5 cm
23
30.5 cm
23
23 cm
23
28 cm
23
Upper basket with side levers
24
1. Pull out upper basket 12.
24
2. Hold the sides of the basket along the upper edge.
24
3. To lower the upper basket; press in both levers on the left and right on the outside of the basket. The upper basket lowers.
24
4. To lift the upper basket; grip the sides of the upper basket along the upper edge and lift.
24
5. Ensure that both sides of the upper basket are at the same height.
24
6. Push in upper basket.
24
Upper basket with upper and lower pairs of rollers
24
1. Pull out upper basket 12.
24
2. Remove upper basket.
24
3. Re-attach upper basket to the upper (Setting 3) or lower (Setting 1) rollers.
24
4. Push in upper basket.
24
. Detergent
24
Detergent
24
Note:
24
: Warning
24
Risk of injury and damage due to non-observance of the safety instructions for detergent and rinse-aid products!
24
Adding detergent
25
1. If the detergent dispenser 9: is still closed, actuate locking bar 9B to open it.
25
2. Pour detergent into the dry detergent dispenser 9: only (insert tablet flat, not on its edge).
25
3. Dosage: see manufacturer’s instructions on the packaging. Use graduated detergent dispenser.
25
4. Close cover on the detergent dispenser. Cover “clicks” into position.
25
Tip:
25
Combination detergent
25
Notes
26
/ Overview of programmes
27
Overview of programmes
27
The max. possible number of programmes is illustrated in this overview. The corresponding programmes and their arrangement can be found on the fascia.
27
Type of utensils
27
Type of soiling
27
Programme
27
Possible additional options
27
Programme sequence
27
--------
28
Programme selection
28
Information for test institutes
28
0 Additional functions
29
Additional functions
29
Å Save time (VarioSpeedPlus) *
29
Save time (VarioSpeedPlus)
29
§ Half load *
29
Half load
29
µ hygienePlus (HygienePlus) *
29
hygienePlus (HygienePlus)
29
Ï intensiveZone *
29
intensiveZone
29
ï Shine and Dry *
29
Shine and Dry
29
ß Energy Save *
29
Energy Save
29
1 Operating the appliance
30
Operating the appliance
30
Programme data
30
Opening the door
30
Changing the settings
30
Change the setting as follows:
30
1. Open the door.
30
2. Switch on ON/OFF switch (.
30
3. Press Info button { 8 for 3 seconds until the following text is indicated on the display window at the top @:
30
4. Keep pressing button > )* until the required setting is indicated on the display window at the top @.
30
5. Make the setting with setting buttons + - X.
30
6. Press and hold the Info button { 8 for 3 seconds.
30
Tip:
30
AquaSensor *
30
AquaSensor
30
Zeolith drying ¼
30
Zeolith drying
30
: Warning
30
Risk of burns from touching the blow opening 1R!
30
Caution!
30
Time display
31
Sensor setting
31
extraDry
31
Eco forecast
31
AutoPowerOff (Switching off automatically after the end of the programme)
31
Auto Power Off
31
Possible settings are:
31
emotionLight (interior light) *
32
emotionLight
32
Note:
32
Front display *
32
Front display
32
TimeLight (Optical display while the programme is running) *
32
timeLight
32
Infolight *
32
infoLight
32
Changing start programme
32
Tone volume
32
Button volume
32
Child-proof lock *
32
Child-proof lock
32
Greeting
33
Factory setting
33
Switching the appliance on
33
1. Turn on tap fully.
33
2. Open the door.
33
3. Switch on ON/OFF switch (.
33
4. Press START button )".
33
5. Close the door.
33
Note:
33
Time preselection
33
1. Open the door.
33
2. Switch on ON/OFF switch (.
33
3. Selects programme 0.
33
4. Press time preselection button `.
33
5. Keep pressing the setting buttons + - X until the displayed time corresponds with your requirements.
33
6. Press START button )", timer programming is activated.
33
7. To delete the time preselection, press START button )" for approx. 3 seconds.
33
8. Close the door.
33
Programme end
33
Switching off the appliance
34
Short time after the end of the programme:
34
1. Open the door.
34
2. Switch off ON/OFF switch (.
34
3. Turn off tap (does not apply to appliances with Aqua-Stop).
34
4. Remove the utensils when they have cooled down.
34
Note:
34
Interrupting the programme
34
Caution!
34
1. Open the door.
34
2. Switch off ON/OFF switch (.
34
3. To continue the programme, switch on the ON/OFF switch ( again.
34
4. Close the door.
34
Terminating the programme (Reset)
34
Terminating the programme
34
1. Open the door.
34
2. Press the START button )" and hold for 3 seconds
34
3. Close the door.
34
4. Open the door.
34
5. Switch off ON/OFF switch (.
34
6. Close the door.
34
Changing the programme
34
2 Cleaning and maintenance
35
Cleaning and maintenance
35
Overall condition of the machine
35
If you find such deposits:
35
: Warning
35
Health hazard due to detergents containing chlorine!
35
Special salt and rinse aid
35
Filters
36
1. After each washing cycle check the filters for residue.
36
2. Unscrew filter cylinder as illustrated and take out filter system.
36
3. Remove any residue and clean filters under running water.
36
4. Re-install filter system in reverse sequence and ensure that the arrow marks are opposite each other after closing the filter system.
36
Spray arms
36
1. Check outlet nozzles on the spray arms for blockages.
36
2. Unscrew the upper spray arm 1: (1) and remove downwards (2).
36
3. Remove the lower spray arm 1Z upwards.
36
4. Clean spray arms under running water.
36
5. Re-engage or screw on spray arms.
36
3 Fault, what to do?
37
Fault, what to do?
37
Note:
37
: Warning
37
Improper repairs or use of non-original spare parts may cause considerable damage and put the user at considerable risk!
37
Error message
37
Waste water pump
38
: Warning
38
Danger of cutting!
38
Clean the waste water pump as follows:
38
1. Disconnect the dishwasher from the power supply.
38
2. Take out top basket 12 and bottom basket 9*.
38
3. Remove the filters 1j.
38
4. Scoop out water, use a sponge if required.
38
5. Prise off the pump cover (as shown) using a spoon. Grip the pump cover by the crosspiece and lift diagonally inwards (1). Remove cover completely.
38
6. Check impeller wheel and remove any foreign objects.
38
7. Place pump cover in the original position (2) and press down until it engages (3).
38
8. Install filters.
38
9. Re-insert baskets.
38
Fault table
39
Fault
39
Cause
39
Remedial action
39
--------
47
4 Customer service
48
Customer service
48
5 Installation and connection
48
Installation and connection
48
Install the appliance in the correct sequence:
48
1. Checking appliance on delivery
48
2. Installation
48
3. Drainage connection
48
4. Drinking water connection
48
5. Electrical connection
48
Contents of package
48
Safety instructions
48
Delivery
49
Technical specifications
49
Installation
49
Drainage connection
49
1. The required work sequence can be found in the installation instructions. If required, fit a siphon with an drainage connection.
49
2. Connect the waste-water hose to the drainage connection of the siphon with the enclosed parts.
49
Drinking water connection
50
1. Fasten the drinking water connection to the tap according to the installation instructions using the enclosed parts.
50
2. When replacing the appliance, always use a new water supply hose.
50
Warm water connection *
50
Warm water connection
50
To change the setting:
50
1. Open the door.
50
2. Switch on ON/OFF switch (.
50
3. Press Info button { 8 for 3 seconds until the following text is indicated on the display window at the top @:
50
4. Keep pressing the button > )* until water connection appears of the display window at the top @.
50
5. Make the setting with setting buttons + - X.
50
6. Press and hold the Info button { 8 for 3 seconds.
50
Electrical connection
50
Removal
51
Also observe the sequence of worksteps here.
51
1. Disconnect the appliance from the power supply.
51
2. Turn off the tap.
51
3. Undo the waste water and drinking water connection.
51
4. Loosen fastening screws for the furniture parts.
51
5. If fitted, remove the base panel.
51
6. Pull out the appliance, carefully pulling the hose behind.
51
Transporting
51
Drain the appliance according to the following steps:
51
1. Turn on the tap.
51
2. Open the door.
51
3. Switch on ON/OFF switch (.
51
4. Select programme with the highest temperature.
51
5. Press START button )".
51
6. Close the door.
51
7. Open the door after approx. 4 minutes.
51
8. Press START button )" until “Program was terminated”/“Ready in one minute.” is indicated at the top of the display window @.
51
9. Close the door.
51
10. Open the door after approx. 1 minute.
51
11. Switch off ON/OFF switch (.
51
12. Turn off the tap, disconnect supply hose and drain water.
51
Note:
51
Protection against frost
51
Protection against frost (Emptying the appliance)
51
View document