US Door and Fence F2SO93X44US Operating instructions

Type
Operating instructions

This manual is also suitable for

Fence Swivel Mounting Bracket
Model# - SMBFUS
(For 1-1/4" x 1" rails)
Installation Instructions
Step 1
The ends of panel rails are inserted into swivel mounting bracket .
Place blocks under the panel to hold in at the desired height.
Step 2
Socket Spanner
Use socket spanner provided to adjust screw fixed with swivel mounting
bracket, Allows panel angles in up/down & left/right direction
(see illustration). Fix panel rail end with bracket with carriage screws
provided(fig.1). Mark the location of the mounting holes in the mounting brackets
Step 3
Remove the panel and drill 3/16" diameter pilot holes in the posts
where marked
Step 4
Replace the fence panel with the swivel mounting brackets and secure to
the posts with the tapping screws provided(fig.2)
Tools Required
 Pencil
 Tape measure
 Drill
 3/16" steel drill bit
 Flat blade screwdriver or ratchet with a 3/8" socket
 Adjustable wrench
2 .gif1 .gif
Turn right
Turn left
Level
Up grade
Down grade
SMBFUS
MADE IN CHINA
U.S. Door and Fence, LLC., 3880 Garner Road, Riverside CA 92501-1066
For questions, please contact by phone(951)300-0010 or fax (951)300-0016
For warranty information, please contact [email protected]
U.S. Door
and
Fence
SKU # : 1001392762
  • Page 1 1

US Door and Fence F2SO93X44US Operating instructions

Type
Operating instructions
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI