Babbitt Steam Specialty SWK-1 Installation guide

Installation of a Safety Cap Kit

Included in the kit:

Safety Cap

5 feet of wire

2 clips for fastening the wire to the cap

2 clips for fastening the wire to piping

2 screws

Installation of the Safety Cap:

1. Remove the 2 screws that hold the guide

arm to the existing cap.

2. Replace the cap with the safety cap and

secure using supplied screws.

3. Secure the wire with 2 clamps as shown.

Screws

Guide

Arm

Safety

Cap

Wire secured

to piping