Garmin Nexus Owner's manual

Type
Owner's manual

This manual is also suitable for

Installation and Operation Manual
NX Start Pack 4
English
Start pack 4 English
1
English Start pack 4
2
Edition: April 2007
Start pack 4 English
3
1 Part specification.......................................................................................................................5
2 Installation..................................................................................................................................7
2.1 Installing the instrument............................................................................................................8
2.2 Installing the WSI-box...............................................................................................................9
2.3 Installing the Wind Transducer .................................................................................................9
2.3.1 IMPORTANT Installation information!............................................................................9
2.3.2 Location.........................................................................................................................9
2.3.3 Mounting in the mast head............................................................................................9
2.3.4 Mounting the wind transducer step by step.................................................................10
2.4 Installing the Log and depth transducers................................................................................11
2.4.1 Correct location of transducer.....................................................................................11
2.4.2 Installing the through hull fittings.................................................................................13
2.5 Electrical Installation...............................................................................................................14
3 Connection to other Nexus systems......................................................................................15
4 Pairing procedure of wind transducer...................................................................................15
5 Re-initialization of the wind transducer.................................................................................16
6 Maintenance!............................................................................................................................16
7 Change transducer or WSI-box / Release the pairng ...........................................................16
8 First start..................................................................................................................................18
8.1 Initialising the instrument ........................................................................................................18
8.2 How to use the push-buttons of the Sea Data........................................................................19
8.3 Instrument backlight................................................................................................................20
9 Function overview of the Sea Data.........................................................................................20
10 SPEED functions......................................................................................................................21
SPEED main-function..........................................................................................................................21
SPEED sub-functions..........................................................................................................................21
TRIP LOG (TRP).............................................................................................................................21
TOTAL LOG (LOG) .........................................................................................................................21
START TIMER (STA) ......................................................................................................................21
TIMER .............................................................................................................................................21
AVERAGE SPEED (AVS)................................................................................................................21
MAXIMUM SPEED (MAX)...............................................................................................................22
DEPTH (unit/DPT)...........................................................................................................................22
BATTERY (BAT)..............................................................................................................................22
TEMPERATURE (TMP)...................................................................................................................22
11 DEPTH functions......................................................................................................................23
DEPTH main-function..........................................................................................................................23
DEPTH sub-functions..........................................................................................................................23
LIGHT CONTROL ...........................................................................................................................23
SHALLOW ALARM (SHA)...............................................................................................................23
DEPTH ALARM (DEA) ....................................................................................................................23
ANCHOR ALARM............................................................................................................................23
BOAT SPEED (BSP/unit) ................................................................................................................23
Barometric pressure (unit/hPA).......................................................................................................23
11.1.1 TRUE WIND ANGLE (TWA)........................................................................................23
11.1.2 APPARENT WIND ANGLE (TWA)..............................................................................24
11.1.3 TRUE WIND SPEED TWS..........................................................................................24
11.1.4 APPARENT WIND SPEED (AWS)..............................................................................24
11.2 Set shallow (SHA) and depth alarm (DEA) .......................................................................24
11.3 Set and turn on anchor alarm (ANC).................................................................................24
11.4 Clear an alarm value.........................................................................................................24
11.5 Silencing an alarm.............................................................................................................25
11.6 Turning OFF or ON an alarm ............................................................................................25
12 Customise your display...........................................................................................................26
12.1 Move and lock a sub-function ...........................................................................................26
12.2 Copy and lock a sub-function............................................................................................26
12.3 Select power on function...................................................................................................26
English Start pack 4
4
12.4 Cancel a moved or locked sub-function ............................................................................26
12.5 How to use the push buttons of the Wind instrument........................................................27
12.6 Main function.....................................................................................................................28
12.7 Analogue function..............................................................................................................28
12.8 Sub-functions ....................................................................................................................30
12.8.1 Apparent Wind Speed [AWS] ......................................................................................30
12.8.2 True Wind Speed [TWS]..............................................................................................30
12.8.3 Velocity Made Good (VMG).........................................................................................30
12.8.4 Boat speed...................................................................................................................30
12.8.5 Start up mode..............................................................................................................30
12.9 More functions in a Nexus Network...................................................................................31
12.9.1 Count down display .....................................................................................................31
12.9.2 Geographic Wind direction (TWD)...............................................................................31
13 Calibration setting up the Sea Data instrument....................................................................32
13.1 Calibration of speed C10...................................................................................................32
13.1.1 Return C10 (RET)........................................................................................................32
13.1.2 Unit for Speed, C11 (Unit KTS) ...................................................................................32
13.1.3 Calibration of Speed, C12 (1.25 CAL).........................................................................32
13.1.4 Damping of Speed, C13 (SEA)....................................................................................33
13.1.5 Unit for Depth readings, C14 (Unit m) .........................................................................33
13.1.6 Adjust Depth readings, C15 ( - 00.0 ADJ) ...................................................................33
13.1.7 Unit for Temp readings, C16 (Unit°C)..........................................................................33
13.1.8 Adjustment of Temp reading,C17 (0°C TMP)..............................................................34
13.1.9 Unit for Air Pressure, C18 (Unit hPA)..........................................................................34
13.1.10 Unit for Wind Speed, C19 (Unit m/s) ...........................................................................34
13.1.11 Adjustment of Wind Angle, C20 (000° ADJ)................................................................34
13.1.12 Damping of Wind Readings, C21 (SEA LOW).............................................................34
13.1.13 Key beep setting, C22 (OFF KEY)...............................................................................34
14 Calibration and setup of the Wind instrument ......................................................................35
14.1 User settings, C10.............................................................................................................35
14.1.1 Select the dampening, C11 .........................................................................................35
14.1.2 Select main information, C12.......................................................................................35
14.1.3 Beep when a key is pressed, C13 ...............................................................................35
14.1.4 Select unit for BSP/VMG, C14.....................................................................................35
14.1.5 Calibration of log transducer, C15...............................................................................36
14.1.6 Reference for Speed, water or GPS, C16....................................................................36
14.1.7 Reference for Direction, C17.......................................................................................36
14.1.8 Where is the wind Tx connected, C18.........................................................................37
14.1.9 Demo mode selection, C19 .........................................................................................37
14.1.10 Closed hauled PAGE, C20..........................................................................................37
14.2 Wind Settings, C50............................................................................................................38
14.2.1 Unit for Wind speed, C52 ............................................................................................38
14.2.2 Wind speed calibration, C53........................................................................................38
14.2.3 Adjustment of Wind angle, C54...................................................................................38
14.2.4 Calibration for the Wind transducer, C55-C62............................................................38
15 Maintenance and fault finding ................................................................................................40
15.1 Maintenance......................................................................................................................40
15.2 Fault finding.......................................................................................................................40
15.2.1 General fault finding.....................................................................................................40
15.2.2 Fault - action................................................................................................................41
15.2.3 Error messages ...........................................................................................................41
16 Specifications...........................................................................................................................42
16.1 Technical specifications Sea Data ....................................................................................42
16.2 Technical specifications Wind Instrument .........................................................................42
16.3 Technical specifications WSI-box......................................................................................42
17 Waranty.....................................................................................................................................44
Start pack 4 English
5
1 Part specification
___________________________________________________________
Items delivered with the instrument
Qty Description Reference
1 NX2 Sea Data instrument 1
1 NX Wind instrument 2
1 WSI-box 3
2 Instrument cover 4
2 Drill template for instrument 5
1 Installation and operating manual 6
1 Warranty card 7
4 Instrument mounting screws 8
4 Plastic nuts 8
2 Connection back cover 8
2 Silicon paste tube 8
4 Plastic cable strap 8
1 Inter-connection cable, 0,3 m (1 ft ) 9
1 Nexus Network cable, 8 m (26 ft) 10
5 Cable protectors, 0,25 mm (0.1 inch) 11
5 Cable protectors, 0,75 mm (0.3 inch) 11
1 3m red power cable 12
1 3m black power cable 13
2 Through-hull fitting with nut 14
2 Locking device 14
1 Log transducer TH43 15
1 Depth transducer TH43 16
2 Dummy plug 17
8 O-ring 18
3 Mounting screws for Wind transducer 19
1 Wireless wind transducer 20
1 Wind transducer bracket 20
3 Mounting Screws for WSi-box 21
Registering this product
Once you have checked that you have all the listed parts, please take time to fill in the
warranty document and return it to your national distributor.
By returning the warranty card, it will assist your distributor to give you prompt and
expert attention. Keep your proof of purchase. Also, your details are added to our
customer database so that you automatically receive new product catalogues when
they are released.
Warranty conditions see 17.
English Start pack 4
6
- Instrument -
Installation and Operation Manual
NX Sea Data
English
Start pack 4 English
7
2 Installation
The installation includes 6 major steps:
1. Read the installation and operation manual.
2. Plan where to install the WSI-box, transducers and instruments.
3. Run the cables.
4. Install the WSI-box, transducers and instruments.
5. Learn the functions and calibrate your system.
Before you begin drilling ... think about how you can make the installation as neat
and simple as your boat will allow. Plan where to position the transducers, Server
and instruments. Think about leaving space for additional instruments in the future.
A few ”do not” you should consider:
Do not cut the cables too short. Allow extra cable length at the Server so it
can be disconnected for inspection without having to disconnect all
attached cables.
Do not place sealant behind the display. The instrument gasket eliminates
the need for sealant.
Do not run cables in the bilge, where water can appear.
Do not run cables close to fluorescent light sources, engine or radio
transmitting equipment to avoid electrical disturbances.
Do not rush, take your time. A neat installation is easy to do.
The following material is needed:
Wire cutters and strippers.
Small and large Philips and small flat head screw driver.
Hole saw for the instrument clearance of 63 mm (2½").
Hole saw for the transducers of 43 mm.
2.8mm drill for the WSI-box mounting screws
5 mm (
1
/
4
") drill for the mounting holes.
Plastic cable ties
If you are doubtful about the installation, obtain the services of an experienced
technician.
English Start pack 4
8
2.1 Installing the instrument
Place the adhesive drill template on the desired location for the instrument. Drill the
2 holes using a 5 mm (1/4") drill for the two pin bolts. Use a 63 mm (2½") hole saw
to machine the clearance hole for the instrument connection socket. Remove the
template.
Screw the two pin bolts to the instrument
Put the instrument in place
Screw the two nuts from the back
Note! The two nuts must just be tighten by hand only
Run the Nexus Network cable from the WSI-
box to the instrument.
If you want to cut the Nexus Network cable to
length, disconnect 4-pole jack plug and cut
the cable. Peel off about 35 mm (1.4") of the
cable insulation. Remove about 6 mm (1/4")
from the 3 isolated wires (the 4th wire is an
earth / screen). Attach the 4 cable protectors
to the wires using a pair of flat pliers.
Connect the 4 cable protectors to the 4-pole
jack plug as shown. Apply silicon paste on all
locations as shown.
Note: Must be done to avoid corrosion.
Silicon paste
Start pack 4 English
9
2.2 Installing the WSI-box
Remove the WSI-box cover from the base plate by removing the
screw. Drill the 3 screw holes using a 2.8 mm (0.11") drill. Mount
the WSI-box using the 3 mounting screws.
Apply silicon paste on the screw terminal. Connect the 8 m Nexus
Network cable supplied with cable protectors to the WSI-box on
pins 13, 14, 15, and 16. Match the colour codes for each wire.
2.3 Installing the Wind Transducer
2.3.1 IMPORTANT Installation information!
BEFORE placing the wind transducer on the mast, a pairing
procedure must be done!
2.3.2 Location
The transducer should be mounted on a horizontal surface in the mast head. If the
masthead is not horizontal a shim has to be added. A 15 shim for Seldén masts is
available (art.no 67400-15).
2.3.3 Mounting in the mast head
The transducer permits any type of horizontal mounting angle.
Mount the unit by directing the pipe (1) down and backwards in the bracket (2). Secure
the nut (3) towards the attachment BY HAND (tools can be needed when demounting).
Attach the security clamp (4) behind the nut.
English Start pack 4
10
2.3.4 Mounting the wind transducer step by step
1. Mark the mounting holes using
the bracket as an template
3. Mount the bracket with the three
supplied screws
5. Tighten the lock nut by hand only
(do not use any tool)
2. Drill the three mounting holes
using a 3,2mm drill
4. Insert the transducer into the
bracket from front to back
6. Attach the security clamp
Start pack 4 English
11
2.4 Installing the Log and depth transducers
2.4.1 Correct location of transducer
Generally the transducers should be placed as far forward as possible along the waterline length
and close to the centreline.
The depth transducer can be mounted on the opposite side from the speed transducer.
If the transducers are mounted on the center line of the boat, the depth transducer should be
mounted about 40cm in front of the speed transducer.
It is important that the transducers are always in the water, within the whole speed range of
the boat. Please note that the actual waterline length of fast power boats shortens considerably at
high speeds. Therefore the transducer should be placed at 25-35% along the true waterline from
the bow, when at full speed
Example:
English Start pack 4
12
Sailboats with a fin keel must have the transducer located at least 25 cm but not more than 75 cm
in front of the keel. It should be placed no more than 10 cm off the centreline.
On sailboats with a pronounced “V” in the hull, such as full-keel yachts, it might be favourable to
angle the transducer slightly so that it aims at the bow, rather than directly parallel to the
centreline.
This will help balanced the passing waterflow measurement from one tack to another.
Avoid placing the transducer near the edge of sharp hull chines. Transverse waterflow in these
areas can affect the accuracy of measurements.
If you have a questions about the location of the through-hull, contact your builder, yacht
dealer, or other owners of similar boats for advice. Always remember to allow for
accessibility from the inside of the yacht when determining the final location.
Start pack 4 English
13
2.4.2 Installing the through hull fittings
1. Use a 43 mm (1 11/16”) hole cutter to cut through the hull. (See section 3 for correct
location).
2. Apply the polyurethane sealing compound on the outer flange of the through-hull fitting and
tighten the nut on the inside by hand.
3. Slide both rubber O-rings on the dummy plug.
4. Generously apply the silicone grease to the exterior of the dummy plug.
5. Install the dummy plug in the through-hull fitting. Use a slow twisting motion and be sure that
is properly seated into the fitting.
6. With the dummy plug properly installed in the through –hull fitting, mount the fitting so that the
handle is exactly at right angles (90º) to the boats centreline. (For pronounced V-hulls see
section 3).
7. When this outer sealant has cured, remove the nut and apply sealant on the inside. Tighten
the nut again by hand.
8. Install the wire locking device onto the dummy plug /paddlewheel transducer.
English Start pack 4
14
2.5 Electrical Installation
3A Fuse
Start pack 4 English
15
Apply silicon paste to the instrument connection pins at the back of the instrument.
Press the jack plug onto the instrument pins. Press the cable in to the cable leads.
Mount the connection back cover with the screw.
3 Connection to other Nexus systems
A NX system is fully compatible with other Nexus Network system such as NX2. If you
want to connect the NX system to a NX2 system, you have to move the connection of
the log and depth transducers to the WSI box. Note that a 200kHz depth transducer
must be used. The 200kHz transducer is recognized by the colour of the leads that
should be blue, black and screen. If your existing depth transducer has other colours of
the transducer leads, it has to be changed. 200kHz transducers are available for all
types of Nexus through hull fittings.
The Nexus network cable of the NX system may be connected at any location in the
existing Nexus system. That is normally at the NX2 Server but if it is more convenient,
you may connect the NX Network cable to any existing NX2 instrument.
4 Pairing procedure of wind transducer
When all instruments have been installed, a pairing procedure between the wireless
wind transducer and the WSI unit must be made to introduce it to your specific NX
network system. This is how you do it:
a. Make sure the wind transducer is fully charged!
If the wind transducer has been stored in a dark place for a long time,
you must first charge it by exposing the solar cell for sun light some
hours before use.
b. Pairing!
Hold the wind transducer within 2m from the Wireless WSI unit, and
then press the INIT button (through the hole in the bottom of the
battery lid) by use of the “pin”.
English Start pack 4
16
If the batter lid is open, you may see the LED. The built in LED will
flash 2 times then lit for 2s, before it is turned off. Your Nexus system
is now ready for use.
If the pairing of some reason did not work, the LED will flash a third
time. You should then release the WSI-box airing, see below!
5 Re-initialization of the wind transducer
To release the Wind transducer and re-initializing it, press and hold the INIT
button for 5s.
The wind transducer can then be re-initialised again to the same, or to any other
WSI-box as described above.
när den åter skall monteras. Se procedur enligt ovan.
6 Maintenance!
If you have been using the Wireless wind for several seasons, you may need to
change the rechargeable cells.
Use Nexus original NiMh cells.
IMPORTANT! Do not change the rechargeable cell in strong light! If needed, cover
the solar cell with your hand while changing cells!
Open the battery lid and remove the old cell from the connector, install the new
cells. Return the used Cells to waste collection!
7 Change transducer or WSI-box / Release the pairng
If the wireless transducer or the WSI box has to be exchanged, WSI-box piring has to
be released. To release the WSI-box, there are two alteratives:
A From a NX Sea Data instrument
1. Press and hold the SET button for two seconds
Start pack 4 English
17
2. Press the PLUS button until the text C15 is showed
3. Note the value for C15.
4. Press SET (short) and enter the value 99.9 using MINUS, PLUS and PAGE.
5. Press SET.
6. The WSI-boxen has now released the pairing and you can now enter the value you
noted under point 3 again
7. Press PAGE followed by SET to exit the setting mode
B From a NX Wind instrument
1. Press and hold the SET button for two seconds
2. Press the PAGE button until the text C50 is showed
3. Press the PLUS button until the text C53 is showed
4. Note the value for C53 (normally 1.70).
5. Press SET (short) and enter the value 1.99 using MINUS, PLUS and PAGE.
6. Press SET.
7. The WSI-boxen has now released the pairing and you can now enter the value
you noted under point 4 again
8. Press PAGE followed by SET to exit the setting mode
Release the pairing of the wind transducer
To release the Wind transducer and re-initializing it, press and hold the INIT button (see
picture on previous page) for 5s. Use the supplied initialization pin.
English Start pack 4
18
8 First start
8.1 Initialising the instrument
You will be asked to press SET (PrESkey)
on the instruments the very first time after
installation. This will give the instrument a
logical ID number that belongs to your
specific Nexus Network.
Press SET, on each installed instrument, one
at the time.
Always wait for the text ‘Init OK’
to be displayed, before
you
press SET on the next
instrument!
The first unit ID number is 16, then 17 and so
on in the order which you press SET.
The example shows that the Sea Data
instrument version number is 1.0 and that
the instrument was given the logical ID
number 16.. The Wind instrument has
version no. 1.00 and ID number 17
The bottom row in the Sea Data shows the
software version (4.8) and ID number (0) of
the network master (WSI-box or Server).
When the NX WSI-box is network master,
the ID number is 2
When the NX2 Server is network master, the ID
number is 0
Sea Data
Wind
Start pack 4 English
19
8.2 How to use the push-buttons of the Sea Data
MAIN
PAGE
SUB
FUNCTION
MAIN
FUNCTION
CLEAR
Clear trip log,
cancel alarms
or reset the
timer.
MINUS
Move to the next
sub-function.
In edit mode:
Decreases the
shown value
PLUS
Move to the
previous sub-
function
.
In edit mode:
Increase the
shown va
lue
SET
Set or edit alarm
value or
calibration.
Start race timer
PAGE
Change main
function, either
SPEED or
DEPTH.
In edit mode:
Moves the cursor
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48

Garmin Nexus Owner's manual

Type
Owner's manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI