HP DesignJet 10000s Printer series User guide

DesignJet 10000s Printer series
HP
Brand
HP
Model
DesignJet 10000s Printer series
Type
User guide

HP DesignJet 10000s Printer series offers exceptional media handling capabilities and supports a wide range of media types, including banner, PVC, textile, and backlit banner. It features dual roll printing for increased productivity and mesh printing for specialized applications. The printer utilizes advanced media loading techniques, such as the suggested media path for single-side and dual-side printing, ensuring accurate and efficient media handling.

HP DesignJet 10000s Printer series offers exceptional media handling capabilities and supports a wide range of media types, including banner, PVC, textile, and backlit banner. It features dual roll printing for increased productivity and mesh printing for specialized applications. The printer utilizes advanced media loading techniques, such as the suggested media path for single-side and dual-side printing, ensuring accurate and efficient media handling.

Set DETECT WIDTH to NONE.
Use the Separator bar.
High
Special edge
guard hook,
Wiper side edge
guard, Cap side
edge guard,
Attachment
magnets (3)
High
Depending
on media
(see media
table)
Used to roll-up the
liner.
Media Width
Bar/Small
Flanges/2xO-Rings
Depending
on media
(see media
table)
BACKm
Mesh printing
Mesh printingMesh printing
Mesh printing
Maximum media roll width is 50“.
Use identical media rolls (type and
width). The wound diameter on
each roll must be the same. Only
print on the outside of the media
rolls. For alternative dual Roll
methods see User Guide
(Chapter 3).
High
Flange spacer
(2)
Flange joint
Media edge
guards (2)
Low if the
media is
thinner than
0.5 mm
Depending
on media
(see media
table)
Used to roll-up the
two media
(optional)
depending on
media
(See User Guide
Chapter 3)
Use two
tension
bars (one
for each
slack)
DUAL
Dual roll printing
Dual roll printingDual roll printing
Dual roll printing
(Main-Main)
Rotate the image in the RIP by 180º
before sending it.
Set DETECT WIDTH to NONE
Use the Separator bar.
For alternative dual side methods
see User Guide (Chapter 4).
High
Special edge
guard hook, Wiper
side edge guard,
Cap side edge
guard, Attachment
magnets (3)
High
Depending
on media
(see media
table)
Used to roll-up the
liner.
Media Width
Bar/Small
Flanges/2xO-Rings
Depending
on media
(see media
table)
BACKm
Back Side
(with liner)
Recommended
Rotate the image in the RIP before
sending it.
For alternative dual side methods
see User Guide (Chapter 4).
High
None
Low if the
media is
thinner than
0.5 mm
Depending
on media
(see media
table)
Used to roll-up the
media
(not recommended)
Depending
on media
(see media
table)
BACKm
Back Side
(without
liner) Not
recommended
Two lines at the end of each
plot will be printed.
High
None
Low if the
media is
thinner than
0.5 mm
Depending
on media
(see media
table)
Used to roll-up the
media
depending on
media
(see media table)
Depending
on media
(see media
table)
FRONT
Front side
(without liner)
Dual side
Dual side Dual side
Dual side
printing
printingprinting
printing
(Printing on
the back of
the media
from the feed
side after
relocating
from take-up
side)
None
High
None
Low if the
media is
thinner than
0.5 mm
Depending
on media
(see media
table)
Used to roll-up the
media (optional)
depending on
media
(see media table)
Not
used
Depending
on media
(see media
table)
MAIN
Single side printing
Single side printingSingle side printing
Single side printing
Other comments
Other commentsOther comments
Other commentsVacuum
VacuumVacuum
Vacuum
Extra parts
Extra parts Extra parts
Extra parts
needed
neededneeded
needed
Carriage
Carriage Carriage
Carriage
height
heightheight
height
Media
Media Media
Media
Pressure
Pressure Pressure
Pressure
Lever
LeverLever
Lever
Take
TakeTake
Take-
--
-up
upup
up
Setting
SettingSetting
Setting
Sub
Sub Sub
Sub
scroll
scrollscroll
scroll
Main scroll
Main scrollMain scroll
Main scroll
Tension Bar
Tension BarTension Bar
Tension Bar
Front Panel
Front Panel Front Panel
Front Panel
mode
modemode
mode
Suggested media path
Suggested media pathSuggested media path
Suggested media path
Not
used
Not
used
Not
used
Not
used
Not
used
Media Table
Down (Normal)
Media Width Bar / Big Flanges½ Media Width
Backlit Banner
Backlit BannerBacklit Banner
Backlit Banner
Up (Low)
Media Width Bar / Small Flanges / 2xO-Rings½ Media Width
Textile
Down (Normal)
Shortest Bar / Big Flanges
Shortest (16-inchs)
P V C (S/A Vinyl)
P V C (S/A Vinyl)P V C (S/A Vinyl)
P V C (S/A Vinyl)
Down (Normal)
Media Width Bar / Small Flanges / 2xO-Rings½ Media Width
Banner
BannerBanner
Banner
Media Pressure Lever
Media Pressure LeverMedia Pressure Lever
Media Pressure Lever
Take
TakeTake
Take-
--
-up Setting
up Settingup Setting
up SettingMain scroll Tension Bar
Main scroll Tension BarMain scroll Tension Bar
Main scroll Tension Bar
HP Designjet 10000s Media Loading Guide
  • Page 1 1

HP DesignJet 10000s Printer series User guide

DesignJet 10000s Printer series
HP
Brand
HP
Model
DesignJet 10000s Printer series
Type
User guide

HP DesignJet 10000s Printer series offers exceptional media handling capabilities and supports a wide range of media types, including banner, PVC, textile, and backlit banner. It features dual roll printing for increased productivity and mesh printing for specialized applications. The printer utilizes advanced media loading techniques, such as the suggested media path for single-side and dual-side printing, ensuring accurate and efficient media handling.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents