Alcatel 3EC 16807 AAAA TCZZA ED. 07 User manual

Category
Networking
Type
User manual
     
  

 
   
3EC 16807 AAAA TCZZA Ed. 07
2 /66
Status
Released
Change Note
B D Fa a29236
Short T
itle
CD-UG STUSB WinPPPoA
All rights reserved. Passing on and copying of this
document, use and communication of its contents
not permitted without written authorization from Alcatel.
Contents
3EC 16807 AAAA TCZZA Ed. 07
3 /66
Contents
1 Speed Touch USB Installation Guide 9..................................
1.1 Get Acquainted with your Speed Touch USB 10.......................
1.2 Speed Touch USB Installation 13....................................
1.2.1 What you Need 14......................................
1.2.2 Installing the Speed Touch USB 16.........................
1.2.3 Wiring the Speed Touch USB 22...........................
1.2.4 Installation Results 24....................................
2 Speed Touch USB PPPoA Connection Guide 25...........................
2.1 Making and Releasing a Connection 26.............................
2.2 Speed Touch USB Connection Entries 31.............................
3 Speed Touch USB Diagnostics 35........................................
3.1 Speed Touch USB Status System Tray Icon 36.........................
3.2 Speed Touch USB Diagnostics 37...................................
3.2.1 Basic Speed Touch USB Diagnostics 38.....................
3.2.2 Speed Touch USB Diagnostics Properties 40.................
3.3 Detailed Speed Touch USB Diagnostics 42............................
3.3.1 Connection Diagnostics 43...............................
3.3.2 Physical Diagnostics 44..................................
3.3.3 ATM Diagnostics 45.....................................
3.3.4 OAM F5 Diagnostics 46..................................
3.3.5 AAL5 Diagnostics 47.....................................
3.3.6 Version Diagnostics 48...................................
4 Speed Touch USB Software 49...........................................
4.1 Removing Driver Software 50.......................................
4.2 Upgrading/Repairing Driver Software 52............................
4.3 Speed Touch USB Web Upgrade 54.................................
Abbreviations 55............................................................
AppendixA Troubleshooting 57.........................................
AppendixB LED Description and Port Description 59......................
AppendixC Safety and Agency Regulatory Notices 61....................
Contents
3EC 16807 AAAA TCZZA Ed. 07
4 /66
5 /66
3EC 16807 AAAA TCZZA Ed. 07
Wel come to the Speed Touch USB
Welcome to the Alcatel Speed Touch Asymmetric Digital Subscriber Line (ADSL)
modem.
From now on, your online experience will be revolutionized by the high speed Internet
access that Alcatel's ADSL technology delivers.
With download speeds up to 8Mega bits per second (Mbps), your Speed Touch
is
around 200 times faster than present day modems. This superior Alcatel ADSL technology
outperforms all similar product on the market.
   
 


 
6 /66
3EC 16807 AAAA TCZZA Ed. 07
This     will be your partner in
exploiting the features of this highly advanced product.
Prior to connecting the Speed Tou ch , read the Safety
Instructions (See Appendix C).
The following words and symbols mark special messages
throughout this document:
WARNING: indicates that failure to follow the directions could
cause bodily harm or loss of life.
CAUTION: indicates that failure to follow the directions could
result in damage to equipment or loss of information.
The following trademarks are used in this document:
" Speed Touch is a trademark of the Alcatel Company
" Windows and Internet Explorer are trademarks of
Microsoft Corporation
" Netscape and Netscape Navigator are registered
trademarks of Netscape Communications Corporation
For readability, the Speed Touch will be referred to as
,orSTUSB further in this User Manual.
For readability, Service Provider (SP) will refer to all instances,
responsible for your ADSL connections, i.e. ADSL Service
Provider (ASP), Internet Service Provider (ISP), Corporate, etc.
CAUTION
WARNING
  
 

7 /66
3EC 16807 AAAA TCZZA Ed. 07
Due to the continuous evolution of Alcatel ADSL technology,
existing products are often upgraded. Alcatel's Speed
Touch
documentation, and Speed Touch
software changes accordingly.
For more information on the newest technological breakdowns,
software upgrades, and documents, please consult our Alcatel
web site at:
http://www.alcatel.com
http://www.alcateldsl.com
8 /66
3EC 16807 AAAA TCZZA Ed. 07

  
1 Speed Touch USB Installation Guide
9 /66
3EC 16807 AAAA TCZZA Ed. 07
1 Speed Touch USB Installation Guide
Use this chapter to quickly prepare your for the Internet.
Topic See
Get Acquainted with your STUSB 1.1
STUSB Installation 1.2
 
  

 
1 Speed Touch USB Installation Guide
10 /66
3EC 16807 AAAA TCZZA Ed. 07
1.1 Get Acquainted with your Speed Touch USB
Check your package for the following items:
" The Speed Touch
" 2m ADSL cable (RJ11/RJ11 , RJ14/RJ14)
" A CDĆrom, containing installation software and this User
Manual.
In the event of damaged or missing items, contact your local
product dealer for further instructions.
Your shipping carton may also include release notes, safety
and conformity declarations, and other materials.
  

1 Speed Touch USB Installation Guide
11 /66
3EC 16807 AAAA TCZZA Ed. 07
Unlike most traditional modems, the electronic circuitry of the
has been shaped into a stylish body:
Input/output wiring is moulded in an ergonomically designed
pigtail.
The pigtail splits in two separate parts. From the body to the first
connector block it contains the ADSL cord as well as the USB cord.
At the end of the tail only the USB cord remains.
On the rear end of the tail you find the USB connector. That's the
interface which connects the
to your Personal
Computer (PC). The ADSL Line port is situated in the inline
receptacle. This port connects the to the ADSL highway.
Note: As you notice, there is no separate mains plug, cord, or
power adapter. This is because the
is powered via the USB
connection.
 
1 Speed Touch USB Installation Guide
12 /66
3EC 16807 AAAA TCZZA Ed. 07
ADSL provides simultaneous highĆspeed Internet access and
regular phone services over the existing telephone line already in
your house. With downloads at up to 8Mbps it's up to 200 times
faster than traditional modems. What's more, your connection to
the Internet is established immediately and busy tones are a thing
of the past.
ADSL is short for Asymmetric Digital Subscriber Line. This
somewhat cryptic name is best explained in straightforward terms:
" Line: ADSL uses the ordinary existing copper line, known as
local loop", running between your local premises and the
telephone Central Office (CO).
" Subscriber: That's you, the end user. Because this is what
Service Provider (SP)s, or operators call their customers.
" Digital: ADSL is a digital transmission technology. To a certain
extend, digital information is not affected by impairments on
the telephone line, thus achieving a higher reliability.
" Asymmetric: ADSL can transmit data much faster from the
Internet towards the end user than vice versa.

  
1 Speed Touch USB Installation Guide
13 /66
3EC 16807 AAAA TCZZA Ed. 07
1.2 Speed Touch USB Installation
Execute the steps in this section and in noĆtime you are connected
to the Internet.
Topic See
What you Need 1.2.1
Installing the STUSB 1.2.2
Wiring the STUSB 1.2.3
Installation Results 1.2.4
  

 
1 Speed Touch USB Installation Guide
14 /66
3EC 16807 AAAA TCZZA Ed. 07
1.2.1 What you Need
ADSL service must be enabled on your telephone line.
You need a central splitter, or distributed filters for decoupling
ADSL and telephone signals.
In all cases contact your ADSL service provider about
splitter/filter installation !
Public telephone lines carry voltages that can cause electric
shock. Only install splitter/filters yourself if these are qualified for
that purpose.
Other splitter/filters may only be installed by qualified service
personnel.
You must have a user account for Internet access via a Service
Provider (SP):
For this user account, it will provide you:
" A user name (logon ID)
" A password.
WARNING


1 Speed Touch USB Installation Guide
15 /66
3EC 16807 AAAA TCZZA Ed. 07
Your PC should meet the following minimum requirements for
installation:
" One of the following Operating System (OS) must be readily
installed on your PC:
D Microsoft Windows 98
D Windows 98 Second Edition (98SE)
D Microsoft Windows Millennium (ME)
D Microsoft Windows 2000
You may need the Windows 98/98SE/ME/2000 CDĆrom
during installation.
" For Windows98/98SE/ME:
D Pentium processor 166 MHz, or higher (or compatible)
D 32 Mega Byte (MB) of memory, or more.
" For Window2000 OS:
D Pentium II processor, or higher (or compatible)
D 64 Mega Byte (MB) of memory, or more.
" 30 MB of free hard disk space
" One highĆpowered USB port, i.e. an USB port, capable of
powering attached USB devices.
Note: Make sure you are not using lowĆpowered USB ports to
connect the
.IncaseyouareunsureofthetypeofUSB
port, see the User manual of your PC, or USB port hub.
For the PPPoA connection service you need Microsoft DialĆUp
Networking, default installed with MS Windows 98/98SE and
Windows ME/2000.
For surfing the Internet: a Web browser, e.g. Netscape Navigator,
Internet Explorer, ...
 

  
 
1 Speed Touch USB Installation Guide
16 /66
3EC 16807 AAAA TCZZA Ed. 07
1.2.2 Installing the Speed Touch USB
As your is a true PlugĆandĆPlay device, you can use two
different installation procedures:
" The Alcatel Wizard Installation
By inserting the
CDĆrom, the installation wizard
automatically guides you through all needed installation steps.
" The Plug and Play Compliant Installation
The installation procedure is initiated by connecting the
to your PC's USB port.
It does not matter which method you use, both are equally valid.
In this subsection, the wizard installation is fully described. In case
you experience problems with this installation, you can try the PnP
compliant installation, shortly described at the end of this
subsection.
The installation procedures of your for Windows 98/98SE
and Windows ME/2000 differ only slightly:
" Some windows will look differently
" On Windows 98/98SE no 'Digital Signature' window will pop
up
" For Windows 98/98SE, at the end of the installation
procedure, you are asked to enter your area code for DialĆup
connections.
  
 
1 Speed Touch USB Installation Guide
17 /66
3EC 16807 AAAA TCZZA Ed. 07
1. Insert the installation CDĆrom in your PC's CDĆrom
drive:
The Alcatel wizard will start automatically.
Note: In case the Alcatel
wizard does not start
automatically, open a  window via  ³  from the
Start menu and enter following path:
D:\Setup.exe
,where
D
stands for the drive letter of your CDĆrom drive.
2. The
Setup program prepares the installation wizard:
As soon as the preparation is finished, the installation will start
automatically.
1 Speed Touch USB Installation Guide
18 /66
3EC 16807 AAAA TCZZA Ed. 07
3. The 'Welcome to Alcatel Speed Touch USB setup' window pops
up:
Click to proceed.
4. The 'Software License Agree ment for Alcatel Speed Touch USB'
window pops up:
Click to accept the terms of the agreement and to
continue the installation.
1 Speed Touch USB Installation Guide
19 /66
3EC 16807 AAAA TCZZA Ed. 07
5. The following window allows you to choose a destination
folder for the
driver software:
In most cases the proposed destination is best suited for the
driver software. Click to proceed.
Note: You can change the destination folder. Therefor, click
to select one.
6. The 'Select Program Folder' window pops up:
Click to proceed.
1 Speed Touch USB Installation Guide
20 /66
3EC 16807 AAAA TCZZA Ed. 07
7. The wizard copies driver software to your local hard
disk:
Note for Windows ME/2000 user only:Ifa'Digita l
Signature' window pops up, then click
to continue.
8. The 'Setup Complete' window pops up to announce that
installation is finished:
Click to close the wizard.
9. You can plug in your
now (See subsection 1.2.3 for
more information).
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66

Alcatel 3EC 16807 AAAA TCZZA ED. 07 User manual

Category
Networking
Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI