Gigabyte R151-Z30 User guide

Type
User guide
BIOS Setup
(For Naples Server Platform)
User’s Guide
Rev.1.1
Copyright
© 2017 GIGA-BYTE TECHNOLOGY CO., LTD. All rights reserved.
The trademarks mentioned in this manual are legally registered to their respective owners.
Disclaimer
Information in this manual is protected by copyright laws and is the property of GIGABYTE.
Changes to the specifications and features in this manual may be made by GIGABYTE
without prior notice. No part of this manual may be reproduced, copied, translated, transmitted, or
published in any form or by any means without GIGABYTE's prior written permission.
Documentation Classications
In order to assist in the use of this product, GIGABYTE provides the following types of documentations:
For detailed product information, carefully read the User's Manual.
For more information, visit our website at:
http://b2b.gigabyte.com
You are a professional?
Get an access to our complete source of sales, marketing & technical materials at:
http://reseller.b2b.gigabyte.com
- 3 -
Table of Contents
Chapter 1 BIOS Setup ....................................................................................................5
1-1 The Main Menu ................................................................................................ 7
1-2 Advanced Menu ............................................................................................... 9
1-2-1 iSCSIConguration ................................................................................................10
1-2-2 QLogic577xx/578xx10GbEthernetBCM57810 ...................................................11
1-2-3 VLANConguration ................................................................................................24
1-2-4 CPUConguration ..................................................................................................26
1-2-5 SATAConguration.................................................................................................28
1-2-6 USBConguration ..................................................................................................29
1-2-7 AST2500SuperIOConguration ...........................................................................31
1-2-8 SerialPortConsoleRedirection .............................................................................34
1-2-9 PCISubsystemSettings .........................................................................................39
1-2-10 Network Stack ........................................................................................................41
1-2-11 CSMConguration .................................................................................................42
1-2-12 TrustedComputing .................................................................................................44
1-2-13 NVMeConguration ...............................................................................................45
1-3 AMD CBS Menu ............................................................................................. 46
1-3-1 ZenCommonOptions ............................................................................................47
1-3-2 DFCommonOptions ..............................................................................................50
1-3-3 UMCCommonOptions ..........................................................................................51
1-3-4 NBIOCommonOptions ..........................................................................................58
1-3-5 FCHCommonOptions ...........................................................................................59
1-4 ChipsetSetupMenu ....................................................................................... 61
1-4-1 NorthBridge ...........................................................................................................62
1-4-2 ErrorManagement ..................................................................................................65
1-5 ServerManagementMenu ............................................................................. 66
1-5-1 SystemEventLog ..................................................................................................68
1-5-2 ViewFRUInformation ............................................................................................69
1-5-3 BMCNetworkConguration ...................................................................................70
1-5-4 IPv6BMCNetworkConguration ...........................................................................72
1-6 SecurityMenu ................................................................................................ 74
1-6-1 Secure Boot ............................................................................................................75
1-7 Boot Menu ...................................................................................................... 79
1-7-1 UEFINETWORKDriveBBSPriorities ..................................................................81
1-7-2 UEFIApplicationBootPriorities ................................................................... 82
1-8 Save&ExitMenu ........................................................................................... 83
- 4 -
1-9 ABLPOSTCodes .......................................................................................... 84
1-9-1 StartProcessorTestPoints .......................................................................................84
1-9-2 Memorytestpoints .................................................................................................84
1-9-3 PMUTestPoints .....................................................................................................84
1-9-4 OriginalPostCode .................................................................................................85
1-9-5 CPUtestpoints .......................................................................................................86
1-9-6 Topologytestpoints ................................................................................................86
1-9-7 Extendedmemorytestpoint ...................................................................................86
1-9-8 GnbEarlierinit ........................................................................................................87
1-9-9 PMUtestpoints ......................................................................................................90
1-9-10 ABL0testpoints .....................................................................................................90
1-9-11 ABL5testpoints .....................................................................................................90
1-10 AgesaPOSTCodes ....................................................................................... 94
1-10-1 UniversalPostCode ...............................................................................................94
1-10-2 [0xA1XX]ForCZonlymemoryPostcodes .............................................................94
1-10-3 S3InterfacePostCode ..........................................................................................97
1-10-4 PMUPostCode ......................................................................................................97
1-10-5 [0xA5XX]assignedforAGESAPSPModule ..........................................................97
1-10-6 [0xA9XX,0xAAXX]assignedforAGESANBIOModule .......................................100
1-10-7 [0xACXX]assignedforAGESACCXModule .......................................................102
1-10-8 [0xADXX]assignedforAGESADFModule ..........................................................103
1-10-9 [0xAFXX]assignedforAGESAFCHModule ........................................................103
1-11 BIOSPOSTBeepcode(AMIstandard) ....................................................... 105
1-11-1 PEIBeepCodes ...................................................................................................105
1-11-2 DXEBeepCodes .................................................................................................105
1-12 BIOSRecoveryInstruction ........................................................................... 106
- 5 - BIOS Setup
BIOS (Basic Input and Output System) records hardware parameters of the system in the EFI on the
motherboard. Its major functions include conducting the Power-On Self-Test (POST) during system startup,
saving system parameters and loading operating system, etc. BIOS includes a BIOS Setup program that
allows the user to modify basic system conguration settings or to activate certain system features. When the
power is turned off, the battery on the motherboard supplies the necessary power to the CMOS to keep the
conguration values in the CMOS.
To access the BIOS Setup program, press the <F2> key during the POST when the power is turned on.
Chapter 1 BIOS Setup
BIOS ashing is potentially risky, if you do not encounter problems of using the current BIOS
version, it is recommended that you don't ash the BIOS. To ash the BIOS, do it with caution.
Inadequate BIOS ashing may result in system malfunction.
It is recommended that you not alter the default settings (unless you need to) to prevent system
instability or other unexpected results. Inadequately altering the settings may result in system's
failure to boot. If this occurs, try to clear the CMOS values and reset the board to default values.
(Refer to the Exit section in this chapter or introductions of the battery/clearing CMOS jumper in
Chapter 1 for how to clear the CMOS values.)
BIOS Setup Program Function Keys
<f><g> Move the selection bar to select the screen
<h><i> Move the selection bar to select an item
<+> Increase the numeric value or make changes
<-> Decrease the numeric value or make changes
<Enter> Execute command or enter the submenu
<Esc> Main Menu: Exit the BIOS Setup program
Submenus: Exit current submenu
<F1> Show descriptions of general help
<F3> Restore the previous BIOS settings for the current submenus
<F9> Load the Optimized BIOS default settings for the current submenus
<F10> Save all the changes and exit the BIOS Setup program
BIOS Setup - 6 -
Main
This setup page includes all the items in standard compatible BIOS.
Advanced
This setup page includes all the items of AMI BIOS special enhanced features.
(ex: Auto detect fan and temperature status, automatically congure hard disk parameters.)
AMD CBS
This setup page includes the common items for conguration of AMD motherboard-related information.
Chipset
This setup page includes all the submenu options for conguring the function of processor, network,
North Bridge, South Bridge, and System event logs.
Server Management
Server additional features enabled/disabled setup menus.
Security
Change, set, or disable supervisor and user password. Conguration supervisor password allows you to
restrict access to the system and BIOS Setup.
A supervisor password allows you to make changes in BIOS Setup.
A user password only allows you to view the BIOS settings but not to make changes.
Boot
This setup page provides items for conguration of boot sequence.
Save & Exit
Save all the changes made in the BIOS Setup program to the CMOS and exit BIOS Setup. (Pressing
<F10> can also carry out this task.)
Abandon all changes and the previous settings remain in effect. Pressing <Y> to the confirmation
message will exit BIOS Setup. (Pressing <Esc> can also carry out this task.)
- 7 - BIOS Setup
1-1 The Main Menu
Once you enter the BIOS Setup program, the Main Menu (as shown below) appears on the screen. Use
arrow keys to move among the items and press <Enter> to accept or enter other sub-menu.
Main Menu Help
The on-screen description of a highlighted setup option is displayed on the bottom line of the Main Menu.
Submenu Help
While in a submenu, press <F1> to display a help screen (General Help) of function keys available for the
menu. Press <Esc> to exit the help screen. Help for each item is in the Item Help block on the right side of
the submenu.
When the system is not stable as usual, select the Restore Defaults item to set your system
to its defaults.
The BIOS Setup menus described in this chapter are for reference only and may differ by
BIOS version.
Project Name
Displays the project name information.
Project Version
Displays version number of the BIOS setup utility.
Build Date and Time
Displays the date and time when the BIOS setup utility was created.
BMC Information(Note)
BMC Firmware Version(Note)
Displays BMC rmware version information.
Onboard LAN Information
LAN1 MAC Address(Note)
Displays LAN1 MAC address information.
LAN2 MAC Address(Note)
Displays LAN2 MAC address information.
BIOS Setup - 8 -
Total Memory(Note)
Displays the information for the installed memory size.
Memory Speed(Note)
Displays the information for the installed memory speed.
System Date
Sets the date following the weekday-month-day-year format.
System Time
Sets the system time following the hour-minute-second format.
(Note) Functions available on selected models.
- 9 - BIOS Setup
1-2 Advanced Menu
The Advanced menu display submenu options for conguring the function of various hardware components.
Select a submenu item, then press [Enter] to access the related submenu screen.
BIOS Setup - 10 -
1-2-1 iSCSI Conguration
iSCSI Initiator Name
Add an Attempt
Press [Enter] for conguration of advanced items.
Delete Attempts
Press [Enter] for conguration of advanced items.
Change Attempt Order
Press [Enter] for conguration of advanced items.
- 11 - BIOS Setup
1-2-2 QLogic 577xx/578xx 10 Gb Ethernet BCM57810
Main Conguration Page
Firmware Image Menu
Press [Enter] to view device rmware version information.
Device Hardware Conguration Menu
Press [Enter] to congure device and port specic parameters.
MBA Conguration Menu
Press [Enter] to congure Multiple Boot Agent (MBA) parameters.
iSCSI Boot Conguration Menu
Press [Enter] to congure iSCSI boot parameters.
BIOS Setup - 12 -
Multi-Function Mode
Virtualization mode conguration. System must be rebooted in order for changes to take effect.
Options available: SF/SR-IOV. Default setting is SF.
Blink LEDs
Blink LEDs for a duration up to 15 seconds.
Default setting is 0.
Chip Type
Displays the chip type.
PCI Device ID
Displays the PCI device ID.
Bus: Device: Function
Displays the bus number, device number, and function number.
Link Status
Displays the link status.
Parameter MAC Address
Displays the Permanent MAC Address.
Virtual MAC Address
Displays the Virtual MAC Address.
- 13 - BIOS Setup
1-2-2-1 Firmware Image Menu
Main Conguration Page > Firmware Image Menu
Displays the device's rmware version information.
BIOS Setup - 14 -
1-2-2-2 Device Hardware Conguration Menu
Main Conguration Page > Device Hardware Conguration Menu
Congures the device and port specic parameters. Please refer to help text dened per congurable
parameter for more information.
DCB Protocol
Enable/Disable the DCB Protocol.
Options available: Enabled/Disabled. Default setting is Enabled.
Number of VFs per PF
Displays the number of VFs per PF in multiple of 8 (0 to 64).
Max PF MSI-X Vectors
Displays the maximum number of PF MSI-X Vectors. (0 to 64).
UEFI Boot Mode
Species Driver Boot Mode in UEFI environment.
Default setting is UNDI.
MFW Crash Dump Feature
Enables MFW bootcode to collect critical device and system information during unanticipated system
crash.
Options available: Enabled/Disabled. Default setting is Enabled.
- 15 - BIOS Setup
1-2-2-3 MBA Conguration Menu
Main Conguration Page > MBA Conguration Menu
Congures the Multiple Boot Agent (MBA) parameters.
QLogic 577xx/578xx 10 Gb Ethernet BCN57810
Legacy Boot Protocol
Selects a non-UEFI Boot Protocol to be used.
Options available: PXE/iSCSI/None. Default setting is None.
BIOS Setup - 16 -
Boot Strap Type
Selects the BIOS interrupt call type.
Auto Detect: Auto Detect interrupt type; BBS: BIOS Boot Specification; Int 18h: Interrupt vector to
execute cassette BASIC; Int 19h: BIOS Interrupt vector used to load OS.
Options available: Auto Detect/BBS/Int 18h/Int 19h. Default setting is Auto Detect.
Hide Setup Prompt
Congures whether Setup Prompt is displayed during ROM initialization.
Options available: Enabled/Disabled. Default setting is Disabled.
Setup Key Stroke
Congure key strokes to invoke conguration menu.
Options available: Ctrl-S/Ctrl-B. Default setting is Ctrl-S.
Banner Message Timeout
Selects the timeout value. (0 defaults to 4 seconds, 15 is no delay, 1-14 is timeout value in seconds).
Default setting is 5.
Link Speed
Congures the link speed.
Default setting is 10 Gbps Full.
Wake On LAN
Congures Wake on LAN (WOL). This setting is per port.
Options available: Enabled/Disabled. Default setting is Disabled.
VLAN Mode
Congures the virtual LAN mode.
Options available: Enabled/Disabled. Default setting is Disabled.
VLAN ID (1..4094)
Displays the virtual LAN ID (1 to 4094).
Boot Retry Count
Selects the number of boot retries.
Options available: No Retry/1 Retry/2 Retries/3 Retries/4 Retries/5 Retries/6 Retries/Indenite Retries.
Default setting is No Retry.
- 17 - BIOS Setup
1-2-2-4 iSCSI Boot Conguration Menu
Main Conguration Page > iSCSI Boot Conguration Menu
Congures the iSCSI boot parameters.
iSCSI General Parameters
Press [Enter] for conguration of advanced items.
iSCSI Initiator Parameters
Press [Enter] for conguration of advanced items.
iSCSI First Target Parameters
Press [Enter] for conguration of advanced items.
iSCSI Second Target Parameters
Press [Enter] for conguration of advanced items.
BIOS Setup - 18 -
1-2-2-4-1 iSCSI General Parameters
Main Conguration Page > iSCSI Boot Conguration Menu > iSCSI General
Parameters
Congures the iSCSI general boot parameters.
TCP/IP Parameters via DHCP
Acquires the TCP/IP conguration via DHCP.
Options available: Enabled/Disabled. Default setting is Enabled.
IP Autoconguration
Auto-congures the IP conguration.
Options available: Enabled/Disabled. Default setting is Disabled.
Please note that this item is congurable when TCP/IP Parameters via DHCP is set to Disabled.
- 19 - BIOS Setup
iSCSI Parameters via DHCP
Acquires the iSCSI parameters via DHCP.
Options available: Enabled/Disabled. Default setting is Enabled.
CHAP Authentication
Enable/Disable the CHAP authentication.
Options available: Enabled/Disabled. Default setting is Disabled.
Boot to Target
Enable/Disable booting to iSCSI target after log-on.
Options available: Disabled/Enabled/One Time Disabled. Default setting is Enabled.
DHCP Vendor ID
Press [Enter] to congures the DHCP vendor ID (up to 32 bytes long).
Link Up Delay Time
Congures the link up to delay time in seconds (0..225).
Use TCP Timestamp
Enable/Disable the TCP timestamp.
Options available: Enabled/Disabled. Default setting is Disabled.
Target as rst HDD
Enable/Disable target appears as a rst hard disk drive (HDD) in the system.
Options available: Enabled/Disabled. Default setting is Disabled.
LUN Busy Retry Count
Congures the number of retries in 2 second intervals when LUN is busy (0..60).
Default setting is 0.
IP Version
Displays the IP version supported. Modifying this parameter will reset all IP-related elds.
BIOS Setup - 20 -
1-2-2-4-2 iSCSI Initiator Parameters
Main Conguration Page > iSCSI Boot Conguration Menu > iSCSI Initiator
Parameters
Congures the iSCSI initiator parameters.
IP Address
Congures initiator IP address.
Subnet Mask
Congures IP subnet mask.
Default Gateway
Congures default gateway IP address.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106

Gigabyte R151-Z30 User guide

Type
User guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI