Heyday KB58 Compact Wireless Keyboard User manual

Category
Bluetooth music receivers
Type
User manual
If it is not working on previous paired devices, make sure to turn on Bluetooth on that
device and set keyboard on correct Bluetooth channel
For example, a tablet has paired with , and a laptop has paired with
Set keyboard on if you want to use keyboard on that tablet
Trouble shooting
If it is not working, try below steps to re setup
1.
2.
3.
4.
Turn off your keyboard and turn on power again (make sure channel is set on
or )
Make sure to turn on Bluetooth on your device
Press and HOLD “Fn” and LONG press “ or ” key to set keyboard in pairing
mode, make sure it is discoverable on your device and then pair with your keyboard
If it does not work after 10 seconds, reboot your device and repeat step 1 to 3
connect / pair via Bluetooth in Mac
1.
2.
3.
4.
Turn on your keyboard and set it on either Bluetooth channel or
Click on Apple menu (top left corner of your screen)
Go to System Preferences -> Bluetooth -> Turn Bluetooth on to set up Bluetooth
device
Press and HOLD “Fn” and LONG press “ or ” key to set keyboard in pairing
mode so that it can be found on you device (its LED will start to flash in green)
Click on heyday compact keyboard to connect (its LED will stop flashing and light up
in green and then go off when pairing is completed)
Function keys
low battery
If this LED starts to flash, it means
you need to change battery
Press and hold Fn + F1 ~ F12 as shortcut function keys
Decrease
display brightness
Increase
display brightness
Open
Windows Search
Mutes (turns off)
the device's sound
Decrease
the device's volume
Increase
the device's volume
Switch to
previous media track
Switch to
next media track
Switch to Bluetooth
channel 1 / device 1
Switch to Bluetooth
channel 2 / device 2
Switch to
wireless USB receiver
channel / device
Play media or
pause current
media track
Press F1 ~ F12 as standard function keys
Battery status
LED indicator
detailed setup
This keyboard can be paired with up to 3 different devices
Use “ ” keys to switch connection channel between wireless USB receiver
and 2 other Bluetooth channels
connect via wireless USB receiver
It is plug and play for USB receiver, make sure power is on, plug in USB receiver into
available USB A port on device and set connection channel on “wireless USB receiver”
Trouble shooting
If it is not working, try below steps to re-pair keyboard and USB receiver
1.
2.
3.
Turn off your keyboard and re-plug in USB receiver, turn on power (make sure
channel is set on )
Press and HOLD “Fn” and LONG press “ ” key (keep keyboard close to receiver)
If it does not work after 10 seconds, reboot your device and repeat step 1 to 3
connect / pair via Bluetooth in Windows
1.
2.
3.
4.
Turn on your keyboard and set it on either Bluetooth channel or
Click on Start Menu (bottom left corner of your screen)
Go to Settings -> Device -> Bluetooth & other devices
Turn on Bluetooth -> Add Bluetooth or other device -> Add a device (Bluetooth)
Press and HOLD “Fn” and LONG press “ or ” key to set keyboard in pairing
mode so that it can be found on your device (its LED will start to flash in green)
Click on “heyday compact keyboard” to connect / pair (its LED will stop flashing and
light up in green and then go off when pairing is completed)
This keyboard can automatically detect operating systems
It can automatically detect the operating system (Windows or Mac) on the current
device and remap keys to provide functions and shortcuts where you expect them to be
But if it fails to correctly detect the operating system of a device (incorrect key layout),
you can still manually select the operating system by using combination keys below
“Fn + P” long press switch to Windows “Fn + I” long press to switch to Mac
Press and HOLD “fn” and SHORT press “ ” keys ONCE to switch between
each channel (the default channel is “wireless USB receiver”)
For example, if you are using channel “wireless USB receiver” ( ) and want to switch to
channel “Bluetooth Channel 1” ( ) to connect with another device, just press and HOLD
“fn” and SHORT press “ ” once to switch it, its LED indicator will start to flash / light up
in green, same for switching to “Bluetooth channel 2” ( ) and “wireless USB receiver” ( )
battery compartment
wireless
USB receiver
top
bottom
ON / OFF
switch
connect / pairing
LED indicators
2 x AAA battery
wireless USB receiver Bluetooth channel 1
Bluetooth channel 2
connection channel for
included
Compact Wireless Keyboard (connect via wireless USB receiver or Bluetooth)
USB receiver
2 x AAA battery
battery cover
FCC ID: PRDKB58 Model: KQ5-WG DPCI: 056-00-0064
Input: 3V 50mA Made in CHINA
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:
1) this device may not cause harmful interference, and 2) this device must accept interference received, including
interference that may cause undesired operation.
Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could
void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
TargetCorp. Mpls. MN, 55403 Phone: 1-612-304-6073
Radiation Exposure Statement:
The product comply with the FCC portable RF exposure limit set forth for an uncontrolled environment and are safe
for intended operation as described in this manual. The further RF exposure reduction can be achieved if the product
can be kept as far as possible from the user body or set the device to lower output power if such function is available.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could
void the user's authority to operate this equipment.
NOTE: Do not mix old and new batteries and do not mix alkaline, standard (zinc-carbon) or rechargeable (nicad,
NiMH, etc.) batteries.
Battery life may vary depending on user and computing conditions.
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such
marks by TargetCorp. is under license. Other trademarks and trade names are those of their respective owners.
need some help?
Can’t get it to pair? Just have a question?
safety
Do not use near any water source
Do not modify or repair this device
Do not use in high temperatures or extreme weather
Do not use chemical detergents to clean your device, use a soft dry cloth
call us at: 877-698-4883 online at: TargetTechSupport.com
compact wireless keyboard
5.6in = 142.24mm
4in = 101.6mm
Size: 8 in x 5.6 in = 203.2 x 142.24mm
KQ5+MQZ(2.4G-BT wireless keyboard)
for heyday Instructions Manual - 056000064
back cover cover
印刷順序:印單色,*雙面印刷 對折
紙  質:雙交紙,70
尺  寸:
未折合前-8 in x 5.6 in = 203.2 x 142.24mm
折合後-4 in x 5.6 in = 101.6 x 142.24mm
製作者:Megan簽 核:
REV. A
DATE: 2022.04.22
Project Name:
KS0(2.4G-BT Wireless Keyboard) For Heyday Instructions Manual_Outline_20220422.ai
比例1:1
裁切線
折線
cover
封面朝前對折
back cover
  • Page 1 1

Heyday KB58 Compact Wireless Keyboard User manual

Category
Bluetooth music receivers
Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI