EarFun SP100B User manual

Brand
EarFun
Model
SP100B
Category
Portable speakers
Type
User manual
Portable Bluetooth Speaker
User Manual
EarFun Go
What's in the Box
1
Buttons & Indicators
2
EarFun Go
Type-C USB Cable
User Manual
01
1
2
Microphone
Power Button Bluetooth Button
Volume- Button Volume+ Button
Multi-function Button
Speaker LED Indicator
1
4
7
5 6
2 3
6
7
3
4
5
Connections
3
Battery lndicator
4
For iOS (Support iOS 9 or higher):
For Android (Support Android 8.0 or higher):
Click the ‘Edit’ and add the ‘Batteries’
widget, then click ‘Done’.
It varies from the Android device, please refer to the instruction manual of your device.
You can check the speaker battery level on the device that is paired with:
1.
2.
Note:
02
The battery level has been shown on
your device.
Plugging in an audio cable will automatically switch from Bluetooth mode to AUX
mode. When using AUX mode, control audio playback via the connected device.
To preserve battery lifespan, fully charge at least once in every 45 days.
iOS
Search
Edit
WEATHER
SCREEN TIME
UP NEKT
Up Next
Weather
Batteries
MORE WIDGETS
Amazon
iOS
Search
Edit
BATTERIES
UP NEKT
Edit
BATTERIES
UP NEKT
EarFun GO 90%
65%iphone7
(USB Type-C Port)
(3.5mm Audio input port)
1
1
2
2
Bluetooth Pairing
Speaker LED Indicator
6
5
1s
EarFun GO
Choose “EarFun GO ”
to connect
Bluetooth
BluetoothSettings
True Wireless Stereo Connection with Two EarFun Gos
7
Step1: Pair and connect Go A to your Bluetooth device.
EarFun Go A(L)
03
1.
2.
Note:
When turned on, Go will automatically connect to the last connected device if
available. If not, Go will enter paring mode.
If the speaker didn’t pair with any device and no-operation in 30 minutes, it will
shut down automatically.
Flashing Blue Bluetooth Pairing Mode.
Solid Blue
Charging
Battery Level
Fully Charged
Connected to a device.
Indicator stays on red.
Indicator stays on white.
Battery Level < 15%: indicator stays on red
Battery Level <2%: Indicator flashes red for 8 seconds,
then the speaker turns off.
Functions
8
Playing Music
x1 x2 x3
EarFun Go A(L)
5s
EarFun Go B(R)
5s
Step 2:Power on Go B, and press the Bluetooth buttons of the two speakers
simultaneously for 5 seconds.
Step3: The two indicators stay blue, and the speakers enter True Wireless
Stereo Mode.
04
1.
2.
3.
Note:
Once the two GOs have entered wireless stereo pairing mode before, you don’t
need to pair them as the first pairing. Simply power on the two GOs and they will
connect to each other automatically.
While in TWS mode, you can use one of the buttons to control both Gos at will.
Tap the Bluetooth button twice quickly to change the left and right channel.
Speakerphone
x1
2s1s
Reset and Reconnect
9
If this speaker becomes disconnected or has another connecting problem,
you can press and hold “Volume +” and “Volume –” buttons simultaneously
for 5s at least to clear the pairing of speaker and remove the old pairing in
your Bluetooth device, and then pair again.
If this speaker becomes out of control and can’t
be powred
off, you can press
and hold power button for 8s at least to reboot.
5s
8s
05
Specifications
Customer Service
- Bluetooth Version: V5.0
- Bluetooth Profile: A2DP, AVRCP, HFP, HSP
- Transducer: 2 x 40mm
- Output Power: 2 x 6W
- Signal-to-noise Ratio: 80dB
- Battery: (7.4V, 2200mAh)
- Play Time: Up to 24 hours
(varies by volume level and audio content)
- Charging Time: About 4 hours
- Input Power: 5V/2A
- Dimensions : 58 x 171 x 62 (mm)
- Weight: 430g
18-month Limited Warranty
For FAQS and more information, please email to: service@myearfun.com
www.myearfun.com
Facebook
≥
06
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7

EarFun SP100B User manual

Brand
EarFun
Model
SP100B
Category
Portable speakers
Type
User manual
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents