Ultra-tow 50001042-A Owner's manual

Brand
Ultra-tow
Model
50001042-A
Type
Owner's manual
W E L D - O N T O P W I N D J A C K
OWNER’S MANUAL
WARNING: Read carefully and understand all
INSTRUCTIONS before operating. Failure to follow the
safety rules and other basic safety precautions may result
in serious personal injury.
Item #21463
Page of 6
2
Thank you very much for choosing an ULTRA-TOWTM Product! For future reference, please
complete the owner’s record below:
Model: _______________ Purchase Date: _______________
Save the receipt, warranty and these instructions. It is important that you read the entire manual
to become familiar with this product before you begin using it.
This product is designed for certain applications only. The distributor cannot be responsible for
issues arising from modification. We strongly recommend this product not be modified and/or
used for any application other than that for which it was designed. If you have any questions
relative to a particular application, DO NOT use the product until you have first contacted the
distributor to determine if it can or should be performed on the product.
For technical questions please call 1-800-222-5381.
INTENDED USE
A trailer jack makes coupling and uncoupling from the hitch ball easier.
TECHNICAL SPECIFICATIONS & PACKING LIST
Item
Description
Capacity
5000 Lbs. (2272 kg)
Travel
28 1/2in. (72.4cm)
Working range
25in. – 53.5in. (653 - 1360mm)
GENERAL SAFETY RULES
WARNING: Read and understand all instructions. Failure to follow all instructions listed
below may result in electric shock, fire and/or serious injury.
WARNING: The warnings, cautions, and instructions discussed in this instruction
manual cannot cover all possible conditions or situations that could occur. It must be
understood by the operator that common sense and caution are factors which cannot be built into
this product, but must be supplied by the operator.
SAVE THESE INSTRUCTIONS
WORK AREA
• Keep work area clean, free of clutter and well lit. Cluttered and dark work areas can
cause accidents.
• Keep children and bystanders away while using a trailer jack. Distractions can cause
you to lose control, so visitors should remain at a safe distance from the work area.
• Be aware of all power lines, electrical circuits, water pipes and other mechanical
hazards in your work area, particularly those hazards below the work surface hidden from
the operator’s view that may be unintentionally contacted and may cause personal harm or
property damage.
Page of 6
3
• Be alert of your surroundings. Using a trailer jack in confined work areas may put you
dangerously close to cutting tools and rotating parts.
PERSONAL SAFETY
• Use personal protective equipment. Always wear eye protection. Safety equipment
such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for
appropriate conditions will reduce personal injuries.
• Do not overreach. Keep proper footing and balance at all times. This enables better
control of the trailer jack in unexpected situations.
• Dress properly. Do not wear loose clothing or jewelry. Keep your hair, clothing and
gloves away from moving parts. Loose clothes, jewelry or long hair can be caught in
moving parts.
INSTALLATION
Outer Tube Weld-on
1. All welding operations must be performed by an AWS certified welder.
2. Place the Jack at the desired location. Weld in the locations (shown in Figure 1) on both sides of
the jack using a fillet weld to secure the Jack.
3. Check to make sure Jack does not interfere with trailer light cables or with coupler.
Figure 1
OPERATION
Use the jack and accessories in accordance with these instructions, taking into account the
working conditions and the work to be performed. Use of the trailer jack for operations different
from those intended could result in a hazardous situation.
• Use on smooth, flat surfaces only.
• Do not force the trailer jack. Do not attempt to lift more than the 5000-lb. maximum
lifting capacity of this jack.
• Store idle jacks out of the reach of children and do not allow persons unfamiliar
with the jack or these instructions to operate it.
WARNING: Do not use blocks to increase ground clearance the trailer can tip and fall.
Replace jack if worn, damaged or not operating freely.
Page of 6
4
CAUTION: If the trailer tongue is too heavy, do not attempt to lift it; seek assistance.
1. Turn handle clockwise to raise.
2. Turn handle counterclockwise to lower.
CAUTION: Do not tow trailer with jack in lowered position.
MAINTENANCE
• Maintain your trailer jack. Before each use, inspect the general condition of the jack.
Check for loose hardware, misalignment or binding of moving parts, cracked or broken
parts, damaged electrical wiring, and any other condition that may affect its safe operation.
If damaged, have the jack repaired before use.
• Keep all moving parts lightly lubricated to prevent corrosion.
• After use, wipe external surfaces of the tool with clean cloth.
Page of 6
5
DIAGRAM & PARTS LIST
Part#
Description
Qty.
Part#
Qty.
1
Middle Tube
1
9
2
2
Square Nut
1
10
1
3
Washer
1
11
1
4
Threaded Rod
1
12
1
5
Bearing
1
13
1
6
Bearing Cover
1
14
1
7
Bolt
1
15
1
8
Handle Sets
1
For replacement parts and technical questions, please call 1-800-222-5381.
Page of 6
6
WARRANTY
One-Year Limited Warranty
Distributed by
Northern Tool + Equipment Co., Inc..
Burnsville, MN 55306-6936
NorthernTool.com
Made in China
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6

Ultra-tow 50001042-A Owner's manual

Brand
Ultra-tow
Model
50001042-A
Type
Owner's manual
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents