Husky C302H Installation guide

Type
Installation guide
START
Close regulator knob by
turning in a counterclock-
wise direction until the
outlet pressure reaches zero
Attach air hose to the quick
coupler (air hose and
accessories NOT included)
Ensure the switch is in the
OFF (0) position
Close the drain valve by
turning in a clockwise
direction.Drain tank after
every use.
Pull the ring on the safety
valve to release air for about
20 seconds (if any). Release
the ring to close.
Plug in the power cord.
Use of an extension cord is
not recommended with this
product. Please use a longer
hose instead.
Turn the switch to the AUTO
(I) position. After starting,
wait until the compressor
shuts off before using.
Adjust the pressure
regulator by turning in a
clockwise direction to the
working pressure of the tool.
AIR COMPRESSOR QUICK START UP GUIDE
Model: C302H
SKU: 1001655406
Product is shipped with oil in
the crank case. Ensure that
the oil level meets the center
of the red dot n the oil sight
glass. Consult your manual
for oil fill instructions.
666
88
8
99
9
11
1
22
2
33
3
44
4
55
5
77
7
  • Page 1 1

Husky C302H Installation guide

Type
Installation guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI